diff mbox series

[RESEND,1/4] omap3: igep00x0: Increase malloc() pool size

Message ID 20240518120254.204138-2-javierm@redhat.com
State Superseded
Delegated to: Tom Rini
Headers show
Series omap3: igep0x00: Fix boot failure and modernize the boards support | expand

Commit Message

Javier Martinez Canillas May 18, 2024, 12:02 p.m. UTC 
The IGEPv2 board boot started to fail since the commit afd4f15a39de ("spi:
omap3_spi: Read platform data in ofdata_to_platdata()"). Because this made
the OMAP3 SPI controller driver to allocate its platform data before doing
a relocation, but the igep0x00 config sets this pool size to just 1 KiB.

Increase the pre-relocation malloc heap size to 16 KiB, as is set by other
OMAP3 boards. This not only restores booting but also makes it consistent.

Leave the SPL pool size to the previous 1 KiB size since 16 KiB may not be
a possible size in that constrained environment and is also the value that
is set by other OMAP3 boards.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
---

 configs/igep00x0_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index 261f71acc1dd..e4d25556e3f3 100644
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -1,6 +1,6 @@ 
 CONFIG_ARM=y
 CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
@@ -10,6 +10,7 @@  CONFIG_DEFAULT_DEVICE_TREE="omap3-igep0020"
 CONFIG_SPL_TEXT_BASE=0x40200000
 CONFIG_TARGET_OMAP3_IGEP00X0=y
 CONFIG_SYS_MONITOR_LEN=262144
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3