@@ -19,6 +19,13 @@
#define REG_TYPE 0x4
#define REG_SUBTYPE 0x5
+struct qcom_pmic_btn_data {
+ char *compatible;
+ unsigned int status_bit;
+ int code;
+ char *label;
+};
+
struct qcom_pmic_btn_priv {
u32 base;
u32 status_bit;
@@ -27,11 +34,8 @@ struct qcom_pmic_btn_priv {
};
#define PON_INT_RT_STS 0x10
-#define KPDPWR_ON_INT_BIT 0
-#define RESIN_ON_INT_BIT 1
-
-#define NODE_IS_PWRKEY(node) (!strncmp(ofnode_get_name(node), "pwrkey", strlen("pwrkey")))
-#define NODE_IS_RESIN(node) (!strncmp(ofnode_get_name(node), "resin", strlen("resin")))
+#define PON_KPDPWR_N_SET 0
+#define PON_RESIN_N_SET 1
static enum button_state_t qcom_pwrkey_get_state(struct udevice *dev)
{
@@ -52,10 +56,39 @@ static int qcom_pwrkey_get_code(struct udevice *dev)
return priv->code;
}
+static const struct qcom_pmic_btn_data qcom_pmic_btn_data_table[] = {
+ {
+ .compatible = "qcom,pm8941-pwrkey",
+ .status_bit = PON_KPDPWR_N_SET,
+ .code = KEY_ENTER,
+ .label = "pwrkey",
+ },
+ {
+ .compatible = "qcom,pm8941-resin",
+ .status_bit = PON_RESIN_N_SET,
+ .code = KEY_DOWN,
+ .label = "vol_down",
+ },
+};
+
+static const struct qcom_pmic_btn_data *button_qcom_pmic_match(ofnode node)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(qcom_pmic_btn_data_table); ++i) {
+ if (ofnode_device_is_compatible(node,
+ qcom_pmic_btn_data_table[i].compatible))
+ return &qcom_pmic_btn_data_table[i];
+ }
+
+ return NULL;
+}
+
static int qcom_pwrkey_probe(struct udevice *dev)
{
struct button_uc_plat *uc_plat = dev_get_uclass_plat(dev);
struct qcom_pmic_btn_priv *priv = dev_get_priv(dev);
+ const struct qcom_pmic_btn_data *btn_data;
ofnode node = dev_ofnode(dev);
int ret;
u64 base;
@@ -64,6 +97,14 @@ static int qcom_pwrkey_probe(struct udevice *dev)
if (!uc_plat->label)
return 0;
+ /* Get the data for the node compatible */
+ btn_data = button_qcom_pmic_match(node);
+ if (!btn_data)
+ return -EINVAL;
+
+ priv->status_bit = btn_data->status_bit;
+ priv->code = btn_data->code;
+
/* the pwrkey and resin nodes are children of the "pon" node, get the
* PMIC device to use in pmic_reg_* calls.
*/
@@ -87,23 +128,10 @@ static int qcom_pwrkey_probe(struct udevice *dev)
ret = pmic_reg_read(priv->pmic, priv->base + REG_SUBTYPE);
if (ret < 0 || (ret & 0x7) == 0) {
- printf("%s: unexpected PMCI function subtype %d\n", dev->name, ret);
+ printf("%s: unexpected PMIC function subtype %d\n", dev->name, ret);
return -ENXIO;
}
- if (NODE_IS_PWRKEY(node)) {
- priv->status_bit = 0;
- priv->code = KEY_ENTER;
- } else if (NODE_IS_RESIN(node)) {
- priv->status_bit = 1;
- priv->code = KEY_DOWN;
- } else {
- /* Should not get here! */
- printf("Invalid pon node '%s' should be 'pwrkey' or 'resin'\n",
- ofnode_get_name(node));
- return -EINVAL;
- }
-
return 0;
}
@@ -114,12 +142,20 @@ static int button_qcom_pmic_bind(struct udevice *parent)
int ret;
dev_for_each_subnode(node, parent) {
+ const struct qcom_pmic_btn_data *btn_data;
struct button_uc_plat *uc_plat;
const char *label;
if (!ofnode_is_enabled(node))
continue;
+ /* Get the data for the node compatible */
+ btn_data = button_qcom_pmic_match(node);
+ if (!btn_data) {
+ debug("Unknown button node '%s'\n", ofnode_get_name(node));
+ continue;
+ }
+
ret = device_bind_driver_to_node(parent, "qcom_pwrkey",
ofnode_get_name(node),
node, &dev);
@@ -128,15 +164,7 @@ static int button_qcom_pmic_bind(struct udevice *parent)
return ret;
}
uc_plat = dev_get_uclass_plat(dev);
- if (NODE_IS_PWRKEY(node)) {
- uc_plat->label = "pwrkey";
- } else if (NODE_IS_RESIN(node)) {
- uc_plat->label = "vol_down";
- } else {
- debug("Unknown button node '%s' should be 'pwrkey' or 'resin'\n",
- ofnode_get_name(node));
- device_unbind(dev);
- }
+ uc_plat->label = btn_data->label;
}
return 0;
Move node name checks to a proper data struct with all information for the supported subnodes. Replace the key offset defines with the Linux driver ones. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- drivers/button/button-qcom-pmic.c | 84 ++++++++++++++++++++++++++------------- 1 file changed, 56 insertions(+), 28 deletions(-)