Message ID | 20240322205027.3860170-4-jonas@kwiboo.se |
---|---|
State | Accepted |
Delegated to: | Kever Yang |
Headers | show |
Series | rockchip: spl: Cache boot source id for later use | expand |
Hello Jonas, Please see my comments below. On 2024-03-22 21:50, Jonas Karlman wrote: > Add missing boot source id <-> device tree node path mapping for SPI > NOR > flash on PX30, RK3288, RK3308, RK3368 and RV1126. > > Signed-off-by: Jonas Karlman <jonas@kwiboo.se> > --- > v2: > - New patch > --- > arch/arm/mach-rockchip/px30/px30.c | 1 + > arch/arm/mach-rockchip/rk3288/rk3288.c | 1 + > arch/arm/mach-rockchip/rk3308/rk3308.c | 1 + > arch/arm/mach-rockchip/rk3368/rk3368.c | 1 + > arch/arm/mach-rockchip/rv1126/rv1126.c | 1 + > 5 files changed, 5 insertions(+) > > diff --git a/arch/arm/mach-rockchip/px30/px30.c > b/arch/arm/mach-rockchip/px30/px30.c > index b4f655fa4b3e..2ec3289d75b7 100644 > --- a/arch/arm/mach-rockchip/px30/px30.c > +++ b/arch/arm/mach-rockchip/px30/px30.c > @@ -19,6 +19,7 @@ > > const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { > [BROM_BOOTSOURCE_EMMC] = "/mmc@ff390000", > + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff3a0000/flash@0", AFAICT, no PX30-based board contains an SPI chip, but making this future-proof perhaps shouldn't hurt. > [BROM_BOOTSOURCE_SD] = "/mmc@ff370000", > }; > > diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c > b/arch/arm/mach-rockchip/rk3288/rk3288.c > index c77c56c1dab5..70cf50029121 100644 > --- a/arch/arm/mach-rockchip/rk3288/rk3288.c > +++ b/arch/arm/mach-rockchip/rk3288/rk3288.c > @@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR; > > const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { > [BROM_BOOTSOURCE_EMMC] = "/mmc@ff0f0000", > + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff130000/flash@0", Using spi2 for a flash chip applies to some RK3288-based boards, but AFAICT not to all of them. For example, arch/arm/dts/rk3288-evb.dtsi uses spi0 for a flash chip, which in turn translates to /spi@ff110000/flash@0. The same also applies to arch/arm/dts/rk3288-firefly.dtsi, for example. > [BROM_BOOTSOURCE_SD] = "/mmc@ff0c0000", > }; > > diff --git a/arch/arm/mach-rockchip/rk3308/rk3308.c > b/arch/arm/mach-rockchip/rk3308/rk3308.c > index 27a748327e31..b3ffabc5449a 100644 > --- a/arch/arm/mach-rockchip/rk3308/rk3308.c > +++ b/arch/arm/mach-rockchip/rk3308/rk3308.c > @@ -141,6 +141,7 @@ enum { > > const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { > [BROM_BOOTSOURCE_EMMC] = "/mmc@ff490000", > + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff4c0000/flash@0", AFAICT, no RK3308-based board contains an SPI chip, and I'm not really sure where does /spi@ff4c0000/flash@0 come from. > [BROM_BOOTSOURCE_SD] = "/mmc@ff480000", > }; > > diff --git a/arch/arm/mach-rockchip/rk3368/rk3368.c > b/arch/arm/mach-rockchip/rk3368/rk3368.c > index 651ba1090206..8f5ca1dfa7c9 100644 > --- a/arch/arm/mach-rockchip/rk3368/rk3368.c > +++ b/arch/arm/mach-rockchip/rk3368/rk3368.c > @@ -55,6 +55,7 @@ struct mm_region *mem_map = rk3368_mem_map; > > const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { > [BROM_BOOTSOURCE_EMMC] = "/mmc@ff0f0000", > + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff120000/flash@0", This is fine. > [BROM_BOOTSOURCE_SD] = "/mmc@ff0c0000", > }; > > diff --git a/arch/arm/mach-rockchip/rv1126/rv1126.c > b/arch/arm/mach-rockchip/rv1126/rv1126.c > index 8589c46f10aa..40eb9eb7b196 100644 > --- a/arch/arm/mach-rockchip/rv1126/rv1126.c > +++ b/arch/arm/mach-rockchip/rv1126/rv1126.c > @@ -15,6 +15,7 @@ > > const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { > [BROM_BOOTSOURCE_EMMC] = "/mmc@ffc50000", > + [BROM_BOOTSOURCE_SPINOR] = "/spi@ffc90000/flash@0", This is also fine. > [BROM_BOOTSOURCE_SD] = "/mmc@ffc60000", > };
Hi Dragan, On 2024-03-24 17:52, Dragan Simic wrote: > Hello Jonas, > > Please see my comments below. > > On 2024-03-22 21:50, Jonas Karlman wrote: >> Add missing boot source id <-> device tree node path mapping for SPI >> NOR >> flash on PX30, RK3288, RK3308, RK3368 and RV1126. >> >> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> >> --- >> v2: >> - New patch >> --- >> arch/arm/mach-rockchip/px30/px30.c | 1 + >> arch/arm/mach-rockchip/rk3288/rk3288.c | 1 + >> arch/arm/mach-rockchip/rk3308/rk3308.c | 1 + >> arch/arm/mach-rockchip/rk3368/rk3368.c | 1 + >> arch/arm/mach-rockchip/rv1126/rv1126.c | 1 + >> 5 files changed, 5 insertions(+) >> >> diff --git a/arch/arm/mach-rockchip/px30/px30.c >> b/arch/arm/mach-rockchip/px30/px30.c >> index b4f655fa4b3e..2ec3289d75b7 100644 >> --- a/arch/arm/mach-rockchip/px30/px30.c >> +++ b/arch/arm/mach-rockchip/px30/px30.c >> @@ -19,6 +19,7 @@ >> >> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff390000", >> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff3a0000/flash@0", > > AFAICT, no PX30-based board contains an SPI chip, but making this > future-proof perhaps shouldn't hurt. The rk3326-odroid-go2 variant of PX30 has a jedec,spi-nor node. > >> [BROM_BOOTSOURCE_SD] = "/mmc@ff370000", >> }; >> >> diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c >> b/arch/arm/mach-rockchip/rk3288/rk3288.c >> index c77c56c1dab5..70cf50029121 100644 >> --- a/arch/arm/mach-rockchip/rk3288/rk3288.c >> +++ b/arch/arm/mach-rockchip/rk3288/rk3288.c >> @@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR; >> >> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff0f0000", >> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff130000/flash@0", > > Using spi2 for a flash chip applies to some RK3288-based boards, but > AFAICT > not to all of them. For example, arch/arm/dts/rk3288-evb.dtsi uses spi0 > for a flash chip, which in turn translates to /spi@ff110000/flash@0. > The > same also applies to arch/arm/dts/rk3288-firefly.dtsi, for example. The RK3288 TRM explicitly mention that it can boot from SPI2 CS0. Also I can only find jedec,spi-nor reference in rk3288-phycore-som.dtsi and rk3288-veyron.dtsi, nothing in rk3288-evb.dtsi or rk3288-firefly.dtsi. > >> [BROM_BOOTSOURCE_SD] = "/mmc@ff0c0000", >> }; >> >> diff --git a/arch/arm/mach-rockchip/rk3308/rk3308.c >> b/arch/arm/mach-rockchip/rk3308/rk3308.c >> index 27a748327e31..b3ffabc5449a 100644 >> --- a/arch/arm/mach-rockchip/rk3308/rk3308.c >> +++ b/arch/arm/mach-rockchip/rk3308/rk3308.c >> @@ -141,6 +141,7 @@ enum { >> >> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff490000", >> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff4c0000/flash@0", > > AFAICT, no RK3308-based board contains an SPI chip, and I'm not really > sure where does /spi@ff4c0000/flash@0 come from. RK3308 TRM mention that it can boot from the SFC. And yes there is no upstream board that currently have a jedec,spi-nor node, it however have the sfc (spi@ff4c0000) node so this adds correct node path. Regards, Jonas > >> [BROM_BOOTSOURCE_SD] = "/mmc@ff480000", >> }; >> >> diff --git a/arch/arm/mach-rockchip/rk3368/rk3368.c >> b/arch/arm/mach-rockchip/rk3368/rk3368.c >> index 651ba1090206..8f5ca1dfa7c9 100644 >> --- a/arch/arm/mach-rockchip/rk3368/rk3368.c >> +++ b/arch/arm/mach-rockchip/rk3368/rk3368.c >> @@ -55,6 +55,7 @@ struct mm_region *mem_map = rk3368_mem_map; >> >> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff0f0000", >> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff120000/flash@0", > > This is fine. > >> [BROM_BOOTSOURCE_SD] = "/mmc@ff0c0000", >> }; >> >> diff --git a/arch/arm/mach-rockchip/rv1126/rv1126.c >> b/arch/arm/mach-rockchip/rv1126/rv1126.c >> index 8589c46f10aa..40eb9eb7b196 100644 >> --- a/arch/arm/mach-rockchip/rv1126/rv1126.c >> +++ b/arch/arm/mach-rockchip/rv1126/rv1126.c >> @@ -15,6 +15,7 @@ >> >> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >> [BROM_BOOTSOURCE_EMMC] = "/mmc@ffc50000", >> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ffc90000/flash@0", > > This is also fine. > >> [BROM_BOOTSOURCE_SD] = "/mmc@ffc60000", >> };
On 2024-03-24 18:28, Jonas Karlman wrote: > On 2024-03-24 17:52, Dragan Simic wrote: >> Please see my comments below. >> >> On 2024-03-22 21:50, Jonas Karlman wrote: >>> Add missing boot source id <-> device tree node path mapping for SPI >>> NOR >>> flash on PX30, RK3288, RK3308, RK3368 and RV1126. >>> >>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> >>> --- >>> v2: >>> - New patch >>> --- >>> arch/arm/mach-rockchip/px30/px30.c | 1 + >>> arch/arm/mach-rockchip/rk3288/rk3288.c | 1 + >>> arch/arm/mach-rockchip/rk3308/rk3308.c | 1 + >>> arch/arm/mach-rockchip/rk3368/rk3368.c | 1 + >>> arch/arm/mach-rockchip/rv1126/rv1126.c | 1 + >>> 5 files changed, 5 insertions(+) >>> >>> diff --git a/arch/arm/mach-rockchip/px30/px30.c >>> b/arch/arm/mach-rockchip/px30/px30.c >>> index b4f655fa4b3e..2ec3289d75b7 100644 >>> --- a/arch/arm/mach-rockchip/px30/px30.c >>> +++ b/arch/arm/mach-rockchip/px30/px30.c >>> @@ -19,6 +19,7 @@ >>> >>> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >>> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff390000", >>> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff3a0000/flash@0", >> >> AFAICT, no PX30-based board contains an SPI chip, but making this >> future-proof perhaps shouldn't hurt. > > The rk3326-odroid-go2 variant of PX30 has a jedec,spi-nor node. Ah, I see, I missed that. Thanks for the clarification. >>> [BROM_BOOTSOURCE_SD] = "/mmc@ff370000", >>> }; >>> >>> diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c >>> b/arch/arm/mach-rockchip/rk3288/rk3288.c >>> index c77c56c1dab5..70cf50029121 100644 >>> --- a/arch/arm/mach-rockchip/rk3288/rk3288.c >>> +++ b/arch/arm/mach-rockchip/rk3288/rk3288.c >>> @@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR; >>> >>> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >>> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff0f0000", >>> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff130000/flash@0", >> >> Using spi2 for a flash chip applies to some RK3288-based boards, but >> AFAICT not to all of them. For example, arch/arm/dts/rk3288-evb.dtsi >> uses spi0 for a flash chip, which in turn translates to >> /spi@ff110000/flash@0. The same also applies to >> arch/arm/dts/rk3288-firefly.dtsi, for example. > > The RK3288 TRM explicitly mention that it can boot from SPI2 CS0. > > Also I can only find jedec,spi-nor reference in rk3288-phycore-som.dtsi > and rk3288-veyron.dtsi, nothing in rk3288-evb.dtsi or > rk3288-firefly.dtsi. Oh, I see now, you're right. I've checked the Firefly-RK3288 schematic and it just exposes the spi0 interface on one of its expansion headers. >>> [BROM_BOOTSOURCE_SD] = "/mmc@ff0c0000", >>> }; >>> >>> diff --git a/arch/arm/mach-rockchip/rk3308/rk3308.c >>> b/arch/arm/mach-rockchip/rk3308/rk3308.c >>> index 27a748327e31..b3ffabc5449a 100644 >>> --- a/arch/arm/mach-rockchip/rk3308/rk3308.c >>> +++ b/arch/arm/mach-rockchip/rk3308/rk3308.c >>> @@ -141,6 +141,7 @@ enum { >>> >>> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >>> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff490000", >>> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff4c0000/flash@0", >> >> AFAICT, no RK3308-based board contains an SPI chip, and I'm not really >> sure where does /spi@ff4c0000/flash@0 come from. > > RK3308 TRM mention that it can boot from the SFC. And yes there is no > upstream board that currently have a jedec,spi-nor node, it however > have the sfc (spi@ff4c0000) node so this adds correct node path. Hmm, I see no sfc node in any of the arch/arm/dts/rk3308* files? Maybe I'm missing something, but there's also no "ff4c0000" string in the entire arch/arm/dts directory.
On 2024-03-24 21:58, Dragan Simic wrote: > On 2024-03-24 18:28, Jonas Karlman wrote: >> On 2024-03-24 17:52, Dragan Simic wrote: >>> Please see my comments below. >>> >>> On 2024-03-22 21:50, Jonas Karlman wrote: >>>> Add missing boot source id <-> device tree node path mapping for SPI >>>> NOR >>>> flash on PX30, RK3288, RK3308, RK3368 and RV1126. >>>> >>>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> >>>> --- >>>> v2: >>>> - New patch >>>> --- >>>> arch/arm/mach-rockchip/px30/px30.c | 1 + >>>> arch/arm/mach-rockchip/rk3288/rk3288.c | 1 + >>>> arch/arm/mach-rockchip/rk3308/rk3308.c | 1 + >>>> arch/arm/mach-rockchip/rk3368/rk3368.c | 1 + >>>> arch/arm/mach-rockchip/rv1126/rv1126.c | 1 + >>>> 5 files changed, 5 insertions(+) >>>> >>>> diff --git a/arch/arm/mach-rockchip/px30/px30.c >>>> b/arch/arm/mach-rockchip/px30/px30.c >>>> index b4f655fa4b3e..2ec3289d75b7 100644 >>>> --- a/arch/arm/mach-rockchip/px30/px30.c >>>> +++ b/arch/arm/mach-rockchip/px30/px30.c >>>> @@ -19,6 +19,7 @@ >>>> >>>> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >>>> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff390000", >>>> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff3a0000/flash@0", >>> >>> AFAICT, no PX30-based board contains an SPI chip, but making this >>> future-proof perhaps shouldn't hurt. >> >> The rk3326-odroid-go2 variant of PX30 has a jedec,spi-nor node. > > Ah, I see, I missed that. Thanks for the clarification. > >>>> [BROM_BOOTSOURCE_SD] = "/mmc@ff370000", >>>> }; >>>> >>>> diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c >>>> b/arch/arm/mach-rockchip/rk3288/rk3288.c >>>> index c77c56c1dab5..70cf50029121 100644 >>>> --- a/arch/arm/mach-rockchip/rk3288/rk3288.c >>>> +++ b/arch/arm/mach-rockchip/rk3288/rk3288.c >>>> @@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR; >>>> >>>> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >>>> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff0f0000", >>>> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff130000/flash@0", >>> >>> Using spi2 for a flash chip applies to some RK3288-based boards, but >>> AFAICT not to all of them. For example, arch/arm/dts/rk3288-evb.dtsi >>> uses spi0 for a flash chip, which in turn translates to >>> /spi@ff110000/flash@0. The same also applies to >>> arch/arm/dts/rk3288-firefly.dtsi, for example. >> >> The RK3288 TRM explicitly mention that it can boot from SPI2 CS0. >> >> Also I can only find jedec,spi-nor reference in rk3288-phycore-som.dtsi >> and rk3288-veyron.dtsi, nothing in rk3288-evb.dtsi or >> rk3288-firefly.dtsi. > > Oh, I see now, you're right. I've checked the Firefly-RK3288 schematic > and it just exposes the spi0 interface on one of its expansion headers. > >>>> [BROM_BOOTSOURCE_SD] = "/mmc@ff0c0000", >>>> }; >>>> >>>> diff --git a/arch/arm/mach-rockchip/rk3308/rk3308.c >>>> b/arch/arm/mach-rockchip/rk3308/rk3308.c >>>> index 27a748327e31..b3ffabc5449a 100644 >>>> --- a/arch/arm/mach-rockchip/rk3308/rk3308.c >>>> +++ b/arch/arm/mach-rockchip/rk3308/rk3308.c >>>> @@ -141,6 +141,7 @@ enum { >>>> >>>> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >>>> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff490000", >>>> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff4c0000/flash@0", >>> >>> AFAICT, no RK3308-based board contains an SPI chip, and I'm not really >>> sure where does /spi@ff4c0000/flash@0 come from. >> >> RK3308 TRM mention that it can boot from the SFC. And yes there is no >> upstream board that currently have a jedec,spi-nor node, it however >> have the sfc (spi@ff4c0000) node so this adds correct node path. > > Hmm, I see no sfc node in any of the arch/arm/dts/rk3308* files? > Maybe I'm missing something, but there's also no "ff4c0000" string > in the entire arch/arm/dts directory. The rk3308 DTs in U-Boot is very outdated so the sfc node cannot be found in current master branch. The sfc node is part of linux upstream DT, should also match in dts/upstream in next branch and after the rk3308 DT sync series [1]. rockchip: rk3308: Sync DT with linux v6.8 and update defconfigs: [1] https://patchwork.ozlabs.org/cover/1912830/ Regards, Jonas
On 2024-03-24 22:23, Jonas Karlman wrote: > On 2024-03-24 21:58, Dragan Simic wrote: >> On 2024-03-24 18:28, Jonas Karlman wrote: >>> On 2024-03-24 17:52, Dragan Simic wrote: >>>> On 2024-03-22 21:50, Jonas Karlman wrote: >>>>> diff --git a/arch/arm/mach-rockchip/rk3308/rk3308.c >>>>> b/arch/arm/mach-rockchip/rk3308/rk3308.c >>>>> index 27a748327e31..b3ffabc5449a 100644 >>>>> --- a/arch/arm/mach-rockchip/rk3308/rk3308.c >>>>> +++ b/arch/arm/mach-rockchip/rk3308/rk3308.c >>>>> @@ -141,6 +141,7 @@ enum { >>>>> >>>>> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { >>>>> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff490000", >>>>> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff4c0000/flash@0", >>>> >>>> AFAICT, no RK3308-based board contains an SPI chip, and I'm not >>>> really >>>> sure where does /spi@ff4c0000/flash@0 come from. >>> >>> RK3308 TRM mention that it can boot from the SFC. And yes there is no >>> upstream board that currently have a jedec,spi-nor node, it however >>> have the sfc (spi@ff4c0000) node so this adds correct node path. >> >> Hmm, I see no sfc node in any of the arch/arm/dts/rk3308* files? >> Maybe I'm missing something, but there's also no "ff4c0000" string >> in the entire arch/arm/dts directory. > > The rk3308 DTs in U-Boot is very outdated so the sfc node cannot be > found in current master branch. > > The sfc node is part of linux upstream DT, should also match in > dts/upstream in next branch and after the rk3308 DT sync series [1]. > > rockchip: rk3308: Sync DT with linux v6.8 and update defconfigs: > [1] https://patchwork.ozlabs.org/cover/1912830/ All good, thanks for explaining it further. Please add Reviewed-by: Dragan Simic <dsimic@manjaro.org>
diff --git a/arch/arm/mach-rockchip/px30/px30.c b/arch/arm/mach-rockchip/px30/px30.c index b4f655fa4b3e..2ec3289d75b7 100644 --- a/arch/arm/mach-rockchip/px30/px30.c +++ b/arch/arm/mach-rockchip/px30/px30.c @@ -19,6 +19,7 @@ const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/mmc@ff390000", + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff3a0000/flash@0", [BROM_BOOTSOURCE_SD] = "/mmc@ff370000", }; diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c b/arch/arm/mach-rockchip/rk3288/rk3288.c index c77c56c1dab5..70cf50029121 100644 --- a/arch/arm/mach-rockchip/rk3288/rk3288.c +++ b/arch/arm/mach-rockchip/rk3288/rk3288.c @@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR; const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/mmc@ff0f0000", + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff130000/flash@0", [BROM_BOOTSOURCE_SD] = "/mmc@ff0c0000", }; diff --git a/arch/arm/mach-rockchip/rk3308/rk3308.c b/arch/arm/mach-rockchip/rk3308/rk3308.c index 27a748327e31..b3ffabc5449a 100644 --- a/arch/arm/mach-rockchip/rk3308/rk3308.c +++ b/arch/arm/mach-rockchip/rk3308/rk3308.c @@ -141,6 +141,7 @@ enum { const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/mmc@ff490000", + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff4c0000/flash@0", [BROM_BOOTSOURCE_SD] = "/mmc@ff480000", }; diff --git a/arch/arm/mach-rockchip/rk3368/rk3368.c b/arch/arm/mach-rockchip/rk3368/rk3368.c index 651ba1090206..8f5ca1dfa7c9 100644 --- a/arch/arm/mach-rockchip/rk3368/rk3368.c +++ b/arch/arm/mach-rockchip/rk3368/rk3368.c @@ -55,6 +55,7 @@ struct mm_region *mem_map = rk3368_mem_map; const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/mmc@ff0f0000", + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff120000/flash@0", [BROM_BOOTSOURCE_SD] = "/mmc@ff0c0000", }; diff --git a/arch/arm/mach-rockchip/rv1126/rv1126.c b/arch/arm/mach-rockchip/rv1126/rv1126.c index 8589c46f10aa..40eb9eb7b196 100644 --- a/arch/arm/mach-rockchip/rv1126/rv1126.c +++ b/arch/arm/mach-rockchip/rv1126/rv1126.c @@ -15,6 +15,7 @@ const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/mmc@ffc50000", + [BROM_BOOTSOURCE_SPINOR] = "/spi@ffc90000/flash@0", [BROM_BOOTSOURCE_SD] = "/mmc@ffc60000", };
Add missing boot source id <-> device tree node path mapping for SPI NOR flash on PX30, RK3288, RK3308, RK3368 and RV1126. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- v2: - New patch --- arch/arm/mach-rockchip/px30/px30.c | 1 + arch/arm/mach-rockchip/rk3288/rk3288.c | 1 + arch/arm/mach-rockchip/rk3308/rk3308.c | 1 + arch/arm/mach-rockchip/rk3368/rk3368.c | 1 + arch/arm/mach-rockchip/rv1126/rv1126.c | 1 + 5 files changed, 5 insertions(+)