@@ -568,6 +568,19 @@ config MMC_SDHCI_CADENCE
If unsure, say N.
+config MMC_SDHCI_CV1800B
+ bool "SDHCI support for the CV1800B SD/SDIO/eMMC controller"
+ depends on BLK && DM_MMC
+ depends on MMC_SDHCI
+ depends on OF_CONTROL
+ help
+ This selects the CV1800B SD/SDIO/eMMC driver.
+
+ If you have a controller with this interface,
+ say Y here.
+
+ If unsure, say N.
+
config MMC_SDHCI_AM654
bool "SDHCI Controller on TI's Am654 devices"
depends on ARCH_K3
@@ -60,6 +60,7 @@ obj-$(CONFIG_MMC_SDHCI_ATMEL) += atmel_sdhci.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += bcm2835_sdhci.o
obj-$(CONFIG_MMC_SDHCI_BCMSTB) += bcmstb_sdhci.o
obj-$(CONFIG_MMC_SDHCI_CADENCE) += sdhci-cadence.o
+obj-$(CONFIG_MMC_SDHCI_CV1800B) += cv1800b_sdhci.o
obj-$(CONFIG_MMC_SDHCI_AM654) += am654_sdhci.o
obj-$(CONFIG_MMC_SDHCI_IPROC) += iproc_sdhci.o
obj-$(CONFIG_MMC_SDHCI_KONA) += kona_sdhci.o
new file mode 100644
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
+ */
+
+#include <dm.h>
+#include <mmc.h>
+#include <sdhci.h>
+#include <linux/delay.h>
+
+#define SDHCI_PHY_TX_RX_DLY 0x240
+#define MMC_MAX_CLOCK 375000000
+#define TUNE_MAX_PHCODE 128
+
+struct cv1800b_sdhci_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+static void cv1800b_set_tap_delay(struct sdhci_host *host, u16 tap)
+{
+ sdhci_writel(host, tap << 16, SDHCI_PHY_TX_RX_DLY);
+}
+
+static void cv1800b_sdhci_reset(struct sdhci_host *host, u8 mask)
+{
+ sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+ while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask)
+ udelay(10);
+}
+
+static int cv1800b_execute_tuning(struct mmc *mmc, u8 opcode)
+{
+ struct sdhci_host *host = dev_get_priv(mmc->dev);
+
+ u16 tap;
+
+ int current_size = 0;
+ int max_size = 0;
+ int max_window = 0;
+
+ for (tap = 0; tap < TUNE_MAX_PHCODE; tap++) {
+ cv1800b_set_tap_delay(host, tap);
+
+ if (mmc_send_tuning(host->mmc, opcode, NULL)) {
+ current_size = 0;
+ } else {
+ current_size++;
+ if (current_size > max_size) {
+ max_size = current_size;
+ max_window = tap;
+ }
+ }
+ }
+
+ cv1800b_sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+
+ cv1800b_set_tap_delay(host, max_window - max_size / 2);
+
+ return 0;
+}
+
+const struct sdhci_ops cv1800b_sdhci_sd_ops = {
+ .platform_execute_tuning = cv1800b_execute_tuning,
+};
+
+static int cv1800b_sdhci_bind(struct udevice *dev)
+{
+ struct cv1800b_sdhci_plat *plat = dev_get_plat(dev);
+
+ return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static int cv1800b_sdhci_probe(struct udevice *dev)
+{
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct cv1800b_sdhci_plat *plat = dev_get_plat(dev);
+ struct sdhci_host *host = dev_get_priv(dev);
+ int ret;
+
+ host->name = dev->name;
+ host->ioaddr = devfdt_get_addr_ptr(dev);
+
+ upriv->mmc = &plat->mmc;
+ host->mmc = &plat->mmc;
+ host->mmc->priv = host;
+ host->mmc->dev = dev;
+ host->ops = &cv1800b_sdhci_sd_ops;
+ host->max_clk = MMC_MAX_CLOCK;
+
+ ret = mmc_of_parse(dev, &plat->cfg);
+ if (ret)
+ return ret;
+
+ ret = sdhci_setup_cfg(&plat->cfg, host, 0, 200000);
+ if (ret)
+ return ret;
+
+ return sdhci_probe(dev);
+}
+
+static const struct udevice_id cv1800b_sdhci_match[] = {
+ { .compatible = "sophgo,cv1800b-dwcmshc" },
+ { }
+};
+
+U_BOOT_DRIVER(cv1800b_sdhci) = {
+ .name = "sdhci-cv1800b",
+ .id = UCLASS_MMC,
+ .of_match = cv1800b_sdhci_match,
+ .bind = cv1800b_sdhci_bind,
+ .probe = cv1800b_sdhci_probe,
+ .priv_auto = sizeof(struct sdhci_host),
+ .plat_auto = sizeof(struct cv1800b_sdhci_plat),
+ .ops = &sdhci_ops,
+};
Add sdhci driver for cv1800b SoC. Signed-off-by: Kongyang Liu <seashell11234455@gmail.com> --- Changes in v2: - Refactored and simplified some of the code. drivers/mmc/Kconfig | 13 ++++ drivers/mmc/Makefile | 1 + drivers/mmc/cv1800b_sdhci.c | 116 ++++++++++++++++++++++++++++++++++++ 3 files changed, 130 insertions(+) create mode 100644 drivers/mmc/cv1800b_sdhci.c