| Message ID | 20240102154654.191055-7-macroalpha82@gmail.com |
|---|---|
| State | Accepted |
| Commit | 0cc6cbe84d73ec64a0cb8025633460bd94497606 |
| Delegated to: | Kever Yang |
| Headers | show |
| Series | Add Additional Boards and Features to RGxx3 | expand |
On 2024/1/2 23:46, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > Add support for the Anbernic RG-ARC-D, Anbernic RG-ARC-S, Powkiddy > RK2023, and Powkiddy RGB30 to the Anbernic RGxx3. While the Powkiddy > devices are manufactured by Powkiddy instead of Anbernic, > the hardware is so similar they can all use the same bootloader. > > Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 44 +++++++++++++++++++--- > 1 file changed, 39 insertions(+), 5 deletions(-) > > diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c > index 7bef5a53f0..e12a85a02a 100644 > --- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c > +++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c > @@ -48,9 +48,13 @@ enum rgxx3_device_id { > RG353P, > RG353V, > RG503, > + RGB30, > + RK2023, > + RGARCD, > /* Devices with duplicate ADC value */ > RG353PS, > RG353VS, > + RGARCS, > }; > > static const struct rg3xx_model rg3xx_model_details[] = { > @@ -83,6 +87,27 @@ static const struct rg3xx_model rg3xx_model_details[] = { > .fdtfile = DTB_DIR "rk3566-anbernic-rg503.dtb", > .detect_panel = 0, > }, > + [RGB30] = { > + .adc_value = 383, /* Gathered from second hand information */ > + .board = "rk3566-powkiddy-rgb30", > + .board_name = "RGB30", > + .fdtfile = DTB_DIR "rk3566-powkiddy-rgb30.dtb", > + .detect_panel = 0, > + }, > + [RK2023] = { > + .adc_value = 635, /* Observed average from device */ > + .board = "rk3566-powkiddy-rk2023", > + .board_name = "RK2023", > + .fdtfile = DTB_DIR "rk3566-powkiddy-rk2023.dtb", > + .detect_panel = 0, > + }, > + [RGARCD] = { > + .adc_value = 183, /* Observed average from device */ > + .board = "rk3566-anbernic-rg-arc-d", > + .board_name = "Anbernic RG ARC-D", > + .fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-d.dtb", > + .detect_panel = 0, > + }, > /* Devices with duplicate ADC value */ > [RG353PS] = { > .adc_value = 860, /* Observed average from device */ > @@ -98,6 +123,13 @@ static const struct rg3xx_model rg3xx_model_details[] = { > .fdtfile = DTB_DIR "rk3566-anbernic-rg353vs.dtb", > .detect_panel = 1, > }, > + [RGARCS] = { > + .adc_value = 183, /* Observed average from device */ > + .board = "rk3566-anbernic-rg-arc-s", > + .board_name = "Anbernic RG ARC-S", > + .fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-s.dtb", > + .detect_panel = 0, > + }, > }; > > struct rg353_panel { > @@ -332,19 +364,21 @@ int rgxx3_detect_device(void) > } > > /* > - * Try to access the eMMC on an RG353V or RG353P. If it's > - * missing, it's an RG353VS or RG353PS. Note we could also > - * check for a touchscreen at 0x1a on i2c2. > + * Try to access the eMMC on an RG353V, RG353P, or RG Arc D. > + * If it's missing, it's an RG353VS, RG353PS, or RG Arc S. > + * Note we could also check for a touchscreen at 0x1a on i2c2. > */ > - if (board_id == RG353V || board_id == RG353P) { > + if (board_id == RG353V || board_id == RG353P || board_id == RGARCD) { > mmc = find_mmc_device(0); > if (mmc) { > ret = mmc_init(mmc); > if (ret) { > if (board_id == RG353V) > board_id = RG353VS; > - else > + else if (board_id == RG353P) > board_id = RG353PS; > + else > + board_id = RGARCS; > } > } > }
diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c index 7bef5a53f0..e12a85a02a 100644 --- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c +++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c @@ -48,9 +48,13 @@ enum rgxx3_device_id { RG353P, RG353V, RG503, + RGB30, + RK2023, + RGARCD, /* Devices with duplicate ADC value */ RG353PS, RG353VS, + RGARCS, }; static const struct rg3xx_model rg3xx_model_details[] = { @@ -83,6 +87,27 @@ static const struct rg3xx_model rg3xx_model_details[] = { .fdtfile = DTB_DIR "rk3566-anbernic-rg503.dtb", .detect_panel = 0, }, + [RGB30] = { + .adc_value = 383, /* Gathered from second hand information */ + .board = "rk3566-powkiddy-rgb30", + .board_name = "RGB30", + .fdtfile = DTB_DIR "rk3566-powkiddy-rgb30.dtb", + .detect_panel = 0, + }, + [RK2023] = { + .adc_value = 635, /* Observed average from device */ + .board = "rk3566-powkiddy-rk2023", + .board_name = "RK2023", + .fdtfile = DTB_DIR "rk3566-powkiddy-rk2023.dtb", + .detect_panel = 0, + }, + [RGARCD] = { + .adc_value = 183, /* Observed average from device */ + .board = "rk3566-anbernic-rg-arc-d", + .board_name = "Anbernic RG ARC-D", + .fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-d.dtb", + .detect_panel = 0, + }, /* Devices with duplicate ADC value */ [RG353PS] = { .adc_value = 860, /* Observed average from device */ @@ -98,6 +123,13 @@ static const struct rg3xx_model rg3xx_model_details[] = { .fdtfile = DTB_DIR "rk3566-anbernic-rg353vs.dtb", .detect_panel = 1, }, + [RGARCS] = { + .adc_value = 183, /* Observed average from device */ + .board = "rk3566-anbernic-rg-arc-s", + .board_name = "Anbernic RG ARC-S", + .fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-s.dtb", + .detect_panel = 0, + }, }; struct rg353_panel { @@ -332,19 +364,21 @@ int rgxx3_detect_device(void) } /* - * Try to access the eMMC on an RG353V or RG353P. If it's - * missing, it's an RG353VS or RG353PS. Note we could also - * check for a touchscreen at 0x1a on i2c2. + * Try to access the eMMC on an RG353V, RG353P, or RG Arc D. + * If it's missing, it's an RG353VS, RG353PS, or RG Arc S. + * Note we could also check for a touchscreen at 0x1a on i2c2. */ - if (board_id == RG353V || board_id == RG353P) { + if (board_id == RG353V || board_id == RG353P || board_id == RGARCD) { mmc = find_mmc_device(0); if (mmc) { ret = mmc_init(mmc); if (ret) { if (board_id == RG353V) board_id = RG353VS; - else + else if (board_id == RG353P) board_id = RG353PS; + else + board_id = RGARCS; } } }