@@ -309,7 +309,7 @@ phys_size_t get_effective_memsize(void)
#endif
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
ulong top_addr = PHYS_SDRAM + gd->ram_size;
@@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR;
*/
#define USABLE_RAM_SIZE 0x80000000
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
if (gd->ram_size > USABLE_RAM_SIZE)
return USABLE_RAM_SIZE;
@@ -205,7 +205,7 @@ int dram_init(void)
return 0;
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
unsigned long top = CONFIG_SYS_SDRAM_BASE + SDRAM_MAX_SIZE;
@@ -40,7 +40,7 @@ int dram_init(void)
return 0;
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
phys_size_t size;
phys_addr_t reg;
@@ -65,7 +65,7 @@ static struct mm_region sunxi_mem_map[] = {
};
struct mm_region *mem_map = sunxi_mem_map;
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
/* Some devices (like the EMAC) have a 32-bit DMA limit. */
if (gd->ram_top > (1ULL << 32))
@@ -401,7 +401,7 @@ int dram_init_banksize(void)
* This function is called before dram_init_banksize(), so we can't simply
* return gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size.
*/
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
ulong ram_top;
@@ -76,7 +76,7 @@ void board_init_f(ulong dummy)
}
#endif /* CONFIG_SPL_BUILD */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
return CONFIG_SYS_SDRAM_BASE + (256 * 1024 * 1024);
}
@@ -77,7 +77,7 @@ phys_size_t get_effective_memsize(void)
return UBOOT_RAM_SIZE_MAX;
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
if (IS_ENABLED(CONFIG_RAM_OCTEON)) {
/* Map a maximum of 256MiB - return not size but address */
@@ -21,7 +21,7 @@ int dram_init_banksize(void)
return fdtdec_setup_memory_banksize();
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
/*
* Ensure that we run from first 4GB so that all
@@ -20,7 +20,7 @@ int dram_init_banksize(void)
return fdtdec_setup_memory_banksize();
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
#ifdef CONFIG_64BIT
/*
@@ -21,7 +21,7 @@ int dram_init_banksize(void)
return fdtdec_setup_memory_banksize();
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
/*
* Ensure that we run from first 4GB so that all
@@ -25,7 +25,7 @@
#include <asm/arch/pei_data.h>
#include <asm/arch/pm.h>
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
return mrc_common_board_get_usable_ram_top(total_size);
}
@@ -27,7 +27,7 @@ unsigned int install_e820_map(unsigned int max_entries,
* address, and how far U-Boot is moved by relocation are set in the global
* data structure.
*/
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
uintptr_t dest_addr = 0;
int i;
@@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
* the relocation address, and how far U-Boot is moved by relocation are
* set in the global data structure.
*/
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
struct efi_mem_desc *desc, *end;
struct efi_entry_memmap *map;
@@ -11,7 +11,7 @@
DECLARE_GLOBAL_DATA_PTR;
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
return (ulong)efi_get_ram_base() + gd->ram_size;
}
@@ -25,7 +25,7 @@ static const char *const ecc_decoder[] = {
"active"
};
-ulong mrc_common_board_get_usable_ram_top(ulong total_size)
+phys_size_t mrc_common_board_get_usable_ram_top(phys_size_t total_size)
{
struct memory_info *info = &gd->arch.meminfo;
uintptr_t dest_addr = 0;
@@ -50,7 +50,7 @@ ulong mrc_common_board_get_usable_ram_top(ulong total_size)
dest_addr = largest->start + largest->size;
- return (ulong)dest_addr;
+ return (phys_size_t)dest_addr;
}
void mrc_common_dram_init_banksize(void)
@@ -44,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define CMOS_OFFSET_MRC_SEED_S3 156
#define CMOS_OFFSET_MRC_SEED_CHK 160
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
return mrc_common_board_get_usable_ram_top(total_size);
}
@@ -71,7 +71,7 @@ int dram_init_banksize(void)
* the relocation address, and how far U-Boot is moved by relocation are
* set in the global data structure.
*/
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
return qemu_get_low_memory_size();
}
@@ -184,7 +184,7 @@ int dram_init_banksize(void)
* the relocation address, and how far U-Boot is moved by relocation are
* set in the global data structure.
*/
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
return gd->ram_size;
}
@@ -48,7 +48,7 @@ static struct sbl_memory_map_info *get_memory_map_info(void)
* @total_size: The memory size that u-boot occupies
* Return: : The top available memory address lower than 4GB
*/
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
struct sbl_memory_map_info *data;
int i;
@@ -204,7 +204,7 @@ unsigned int install_e820_map(unsigned int max_entries,
* address, and how far U-Boot is moved by relocation are set in the global
* data structure.
*/
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
struct sfi_table_simple *sb;
struct sfi_mem_entry *mentry;
@@ -47,7 +47,7 @@ int mrc_add_memory_area(struct memory_info *info, uint64_t start,
* the relocation address, and how far U-Boot is moved by relocation are
* set in the global data structure.
*/
-ulong mrc_common_board_get_usable_ram_top(ulong total_size);
+phys_size_t mrc_common_board_get_usable_ram_top(phys_size_t total_size);
void mrc_common_dram_init_banksize(void);
@@ -77,7 +77,7 @@ int x86_cleanup_before_linux(void);
void x86_enable_caches(void);
void x86_disable_caches(void);
int x86_init_cache(void);
-ulong board_get_usable_ram_top(ulong total_size);
+phys_size_t board_get_usable_ram_top(phys_size_t total_size);
int default_print_cpuinfo(void);
/* Set up a UART which can be used with printch(), printhex8(), etc. */
@@ -34,7 +34,7 @@ int dram_init(void)
* the relocation address, and how far U-Boot is moved by relocation are
* set in the global data structure.
*/
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
return fsp_get_usable_lowmem_top(gd->arch.hob_list);
}
@@ -77,7 +77,7 @@ int dram_init(void)
return 0;
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
if (!ll_boot_init())
return gd->ram_size;
@@ -183,7 +183,7 @@ int dram_init_banksize(void)
}
/* Limit RAM used by U-Boot to the DDR first bank End region */
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
return BCM_NS3_MEM_END;
}
@@ -23,7 +23,7 @@ int dram_init(void)
return 0;
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -42,7 +42,7 @@ DECLARE_GLOBAL_DATA_PTR;
static u32 mx53_dram_size[2];
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
/*
* WARNING: We must override get_effective_memsize() function here
@@ -335,7 +335,7 @@ static void set_fdt_addr(void)
/*
* Prevent relocation from stomping on a firmware provided FDT blob.
*/
-unsigned long board_get_usable_ram_top(unsigned long total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
if ((gd->ram_top - fw_dtb_pointer) > SZ_64M)
return gd->ram_top;
@@ -61,7 +61,7 @@ int dram_init(void)
return 0;
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
#ifdef CONFIG_PHYS_64BIT
/* Limit RAM used by U-Boot to the DDR low region */
@@ -57,7 +57,7 @@ int dram_init(void)
return 0;
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
#ifdef CONFIG_PHYS_64BIT
/* Limit RAM used by U-Boot to the DDR low region */
@@ -46,7 +46,7 @@ int dram_init(void)
return 0;
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
#ifdef CONFIG_PHYS_64BIT
/* Limit RAM used by U-Boot to the DDR low region */
@@ -511,7 +511,7 @@ int dram_init(void)
return 0;
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
phys_size_t size;
phys_addr_t reg;
@@ -302,7 +302,7 @@ __weak int mach_cpu_init(void)
}
/* Get the top of usable RAM */
-__weak ulong board_get_usable_ram_top(ulong total_size)
+__weak phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
#if defined(CONFIG_SYS_SDRAM_BASE) && CONFIG_SYS_SDRAM_BASE > 0
/*
@@ -372,7 +372,7 @@ int fsl_dcu_init(struct fb_info *fbinfo, unsigned int xres,
return 0;
}
-ulong board_get_usable_ram_top(ulong total_size)
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
return gd->ram_top - CONFIG_VIDEO_FSL_DCU_MAX_FB_SIZE_MB;
}
@@ -290,7 +290,7 @@ int show_board_info(void);
*
* @param total_size Size of U-Boot (unused?)
*/
-ulong board_get_usable_ram_top(ulong total_size);
+phys_size_t board_get_usable_ram_top(phys_size_t total_size);
int board_early_init_f(void);
Commit 37dc958947ed ("global_data.h: Change ram_top type to phys_addr_t") changed type of ram_top member from ulong to phys_addr_t but did not changed types in board_get_usable_ram_top() function which returns value for ram_top. So change ulong to phys_addr_t type also in board_get_usable_ram_top() signature and implementations. Fixes: 37dc958947ed ("global_data.h: Change ram_top type to phys_addr_t") Signed-off-by: Pali Rohár <pali@kernel.org> --- arch/arm/mach-imx/imx8m/soc.c | 2 +- arch/arm/mach-mvebu/arm64-common.c | 2 +- arch/arm/mach-rockchip/sdram.c | 2 +- arch/arm/mach-stm32mp/dram_init.c | 2 +- arch/arm/mach-sunxi/board.c | 2 +- arch/arm/mach-tegra/board2.c | 2 +- arch/mips/mach-jz47xx/jz4780/jz4780.c | 2 +- arch/mips/mach-octeon/dram.c | 2 +- arch/riscv/cpu/fu540/dram.c | 2 +- arch/riscv/cpu/fu740/dram.c | 2 +- arch/riscv/cpu/generic/dram.c | 2 +- arch/x86/cpu/broadwell/sdram.c | 2 +- arch/x86/cpu/coreboot/sdram.c | 2 +- arch/x86/cpu/efi/payload.c | 2 +- arch/x86/cpu/efi/sdram.c | 2 +- arch/x86/cpu/intel_common/mrc.c | 4 ++-- arch/x86/cpu/ivybridge/sdram.c | 2 +- arch/x86/cpu/qemu/dram.c | 2 +- arch/x86/cpu/quark/dram.c | 2 +- arch/x86/cpu/slimbootloader/sdram.c | 2 +- arch/x86/cpu/tangier/sdram.c | 2 +- arch/x86/include/asm/mrc_common.h | 2 +- arch/x86/include/asm/u-boot-x86.h | 2 +- arch/x86/lib/fsp1/fsp_dram.c | 2 +- arch/x86/lib/fsp2/fsp_dram.c | 2 +- board/broadcom/bcmns3/ns3.c | 2 +- board/imgtec/boston/ddr.c | 2 +- board/menlo/m53menlo/m53menlo.c | 2 +- board/raspberrypi/rpi/rpi.c | 2 +- board/ti/am65x/evm.c | 2 +- board/ti/j721e/evm.c | 2 +- board/ti/j721s2/evm.c | 2 +- board/xilinx/zynqmp/zynqmp.c | 2 +- common/board_f.c | 2 +- drivers/video/fsl_dcu_fb.c | 2 +- include/init.h | 2 +- 36 files changed, 37 insertions(+), 37 deletions(-)