diff mbox series

[v4,04/11] drivers: misc: Makefile: Enable fs_loader compilation at SPL Level

Message ID 20220127121700.130821-5-aouledameur@baylibre.com
State Accepted
Delegated to: Tom Rini
Headers show
Series dra7: bring up and support IPU load/start | expand

Commit Message

Amjad Ouled-Ameur Jan. 27, 2022, 12:16 p.m. UTC 
From: Keerthy <j-keerthy@ti.com>

Enable fs_loader compilation at SPL Level.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[Amjad: fix compilation failures for J721e platform]
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>

---

Changes in v4:
- Enable SPL fs_loader for j7200_evm_r5 and socfpga_arria10.

 arch/arm/mach-k3/common.c         | 10 +++-------
 configs/j7200_evm_r5_defconfig    |  1 +
 configs/j721e_evm_r5_defconfig    |  1 +
 configs/j721e_hs_evm_r5_defconfig |  1 +
 configs/socfpga_arria10_defconfig |  1 +
 drivers/misc/Kconfig              |  9 +++++++++
 drivers/misc/Makefile             |  2 +-
 7 files changed, 17 insertions(+), 8 deletions(-)

Comments

Tom Rini Feb. 8, 2022, 5:32 p.m. UTC | #1 
On Thu, Jan 27, 2022 at 01:16:53PM +0100, Amjad Ouled-Ameur wrote:

> From: Keerthy <j-keerthy@ti.com>
> 
> Enable fs_loader compilation at SPL Level.
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> [Amjad: fix compilation failures for J721e platform]
> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index 39d00270b7fa..b4b75f4e6c86 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -156,13 +156,15 @@  void init_env(void)
 #endif
 }
 
-#ifdef CONFIG_FS_LOADER
 int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
 {
 	struct udevice *fsdev;
 	char *name = NULL;
 	int size = 0;
 
+	if (!IS_ENABLED(CONFIG_FS_LOADER))
+		return 0;
+
 	*loadaddr = 0;
 #ifdef CONFIG_SPL_ENV_SUPPORT
 	switch (spl_boot_device()) {
@@ -186,12 +188,6 @@  int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
 
 	return size;
 }
-#else
-int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
-{
-	return 0;
-}
-#endif
 
 __weak void release_resources_for_core_shutdown(void)
 {
diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
index aeb76e8023f1..f5a8f325c0f1 100644
--- a/configs/j7200_evm_r5_defconfig
+++ b/configs/j7200_evm_r5_defconfig
@@ -91,6 +91,7 @@  CONFIG_SYS_I2C_OMAP24XX=y
 CONFIG_DM_MAILBOX=y
 CONFIG_K3_SEC_PROXY=y
 CONFIG_FS_LOADER=y
+CONFIG_SPL_FS_LOADER=y
 CONFIG_K3_AVS0=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_SPL_MMC_HS400_SUPPORT=y
diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig
index b0759d1f305d..1fb13a8a707d 100644
--- a/configs/j721e_evm_r5_defconfig
+++ b/configs/j721e_evm_r5_defconfig
@@ -88,6 +88,7 @@  CONFIG_SYS_I2C_OMAP24XX=y
 CONFIG_DM_MAILBOX=y
 CONFIG_K3_SEC_PROXY=y
 CONFIG_FS_LOADER=y
+CONFIG_SPL_FS_LOADER=y
 CONFIG_ESM_K3=y
 CONFIG_K3_AVS0=y
 CONFIG_ESM_PMIC=y
diff --git a/configs/j721e_hs_evm_r5_defconfig b/configs/j721e_hs_evm_r5_defconfig
index 3d2bbb4844e8..1e4a93ff53fe 100644
--- a/configs/j721e_hs_evm_r5_defconfig
+++ b/configs/j721e_hs_evm_r5_defconfig
@@ -82,6 +82,7 @@  CONFIG_SYS_I2C_OMAP24XX=y
 CONFIG_DM_MAILBOX=y
 CONFIG_K3_SEC_PROXY=y
 CONFIG_FS_LOADER=y
+CONFIG_SPL_FS_LOADER=y
 CONFIG_K3_AVS0=y
 CONFIG_MMC_SDHCI=y
 CONFIG_SPL_MMC_SDHCI_ADMA=y
diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
index d6b744475039..63284cb0eb54 100644
--- a/configs/socfpga_arria10_defconfig
+++ b/configs/socfpga_arria10_defconfig
@@ -40,6 +40,7 @@  CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_DWAPB_GPIO=y
 CONFIG_FS_LOADER=y
+CONFIG_SPL_FS_LOADER=y
 CONFIG_MMC_DW=y
 CONFIG_MTD=y
 CONFIG_PHY_MICREL=y
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a8baaeaf5cfe..0ade3e32b0ef 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -453,6 +453,15 @@  config FS_LOADER
 	  The consumer driver would then use this loader to program whatever,
 	  ie. the FPGA device.
 
+config SPL_FS_LOADER
+	bool "Enable loader driver for file system"
+	help
+	  This is file system generic loader which can be used to load
+	  the file image from the storage into target such as memory.
+
+	  The consumer driver would then use this loader to program whatever,
+	  ie. the FPGA device.
+
 config GDSYS_SOC
 	bool "Enable gdsys SOC driver"
 	depends on MISC
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f9826d2462d1..bca7b24e99ad 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -37,7 +37,7 @@  obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
 obj-$(CONFIG_FSL_IIM) += fsl_iim.o
 obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
 obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o
-obj-$(CONFIG_FS_LOADER) += fs_loader.o
+obj-$(CONFIG_$(SPL_)FS_LOADER) += fs_loader.o
 obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o
 obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o
 obj-$(CONFIG_GDSYS_SOC) += gdsys_soc.o