| Message ID | 20211118101303.26061-4-jaimeliao.tw@gmail.com |
|---|---|
| State | Changes Requested |
| Delegated to: | Jagannadha Sutradharudu Teki |
| Headers | show |
| Series | Add octal DTR support for Macronix flash | expand |
On 11/18/21 12:13 PM, JaimeLiao wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > Adding Macronix Octal flash for Octal DTR support. > > The octaflash series can be divided into the following types: > > MX25 series : Serial NOR Flash. > MX66 series : Serial NOR Flash with stacked die.(Size larger than 1Gb) > LM/UM series : Up to 250MHz clock frequency with both DTR/STR operation. > LW/UW series : Support simultaneous Read-while-Write operation in multiple > bank architecture. Read-while-write feature which means read > data one bank while another bank is programing or erasing. > > MX25LM : 3.0V Octal I/O > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7841/MX25LM51245G,%203V,%20512Mb,%20v1.1.pdf > > MX25UM : 1.8V Octal I/O > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7525/MX25UM51245G%20Extreme%20Speed,%201.8V,%20512Mb,%20v1.0.pdf > > MX66LM : 3.0V Octal I/O with stacked die > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7929/MX66LM1G45G,%203V,%201Gb,%20v1.1.pdf > > MX66UM : 1.8V Octal I/O with stacked die > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7721/MX66UM1G45G,%201.8V,%201Gb,%20v1.1.pdf > > MX25LW : 3.0V Octal I/O with Read-while-Write > MX25UW : 1.8V Octal I/O with Read-while-Write > MX66LW : 3.0V Octal I/O with Read-while-Write and stack die > MX66UW : 1.8V Octal I/O with Read-while-Write and stack die > > About LW/UW series, please contact us freely if you have any > questions. For adding Octal NOR Flash IDs, we have validated > each Flash on plateform zynq-picozed. > > Signed-off-by: JaimeLiao <jaimeliao.tw@gmail.com> > --- > drivers/mtd/spi/spi-nor-ids.c | 22 +++++++++++++++++++++- > 1 file changed, 21 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c > index cb3a08872d..5c13ea3a78 100644 > --- a/drivers/mtd/spi/spi-nor-ids.c > +++ b/drivers/mtd/spi/spi-nor-ids.c > @@ -169,7 +169,27 @@ const struct flash_info spi_nor_ids[] = { > { INFO("mx66l1g45g", 0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, > { INFO("mx25l1633e", 0xc22415, 0, 64 * 1024, 32, SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | SECT_4K) }, > { INFO("mx25r6435f", 0xc22817, 0, 64 * 1024, 128, SECT_4K) }, > - { INFO("mx66uw2g345g", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx66uw2g345gx0", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx66lm1g45g", 0xc2853b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, which one of all these flashes (including the ones from below) support SFDP and which not? Which can discover the octal dtr method by parsing SFDP and which not? Depending on these those flash_info flags may change. Why do you need SPI_NOR_4B_OPCODES, can't this support be discovered when parsing SFDP? How about SECT_4K? I know for sure there are variants of mx66lm1g45g that do not support SFDP, and flavors that do support SFDP. How you'll differentiate between the two flavors of the same flash? I chose to SKIP SFDP parsing for mx66lm1g45g as there's no infrastructure to handle its case, neither in linux, nor u-boot. Here's what I proposed for now: https://lore.kernel.org/all/20211103234950.202289-3-tudor.ambarus@microchip.com/ Cheers, ta > + { INFO("mx25lm51245g", 0xc2853a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25lw51245g", 0xc2863a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25lm25645g", 0xc28539, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx66um2g45g", 0xc2803c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx66uw2g345g", 0xc2843c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx66um1g45g", 0xc2803b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx66uw1g45g", 0xc2813b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25um51245g", 0xc2803a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25uw51245g", 0xc2813a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25uw51345g", 0xc2843a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25um25645g", 0xc28039, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25uw25645g", 0xc28139, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25um25345g", 0xc28339, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25uw25345g", 0xc28439, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25uw12845g", 0xc28138, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25uw12a45g", 0xc28938, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25uw12345g", 0xc28438, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25uw6445g", 0xc28137, 0, 2 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mx25uw6345g", 0xc28437, 0, 2 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > #endif > > #ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ > -- > 2.17.1 >
Hi Tudor > > On 11/18/21 12:13 PM, JaimeLiao wrote: > > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > > > Adding Macronix Octal flash for Octal DTR support. > > > > The octaflash series can be divided into the following types: > > > > MX25 series : Serial NOR Flash. > > MX66 series : Serial NOR Flash with stacked die.(Size larger than 1Gb) > > LM/UM series : Up to 250MHz clock frequency with both DTR/STR operation. > > LW/UW series : Support simultaneous Read-while-Write operation in multiple > > bank architecture. Read-while-write feature which means read > > data one bank while another bank is programing or erasing. > > > > MX25LM : 3.0V Octal I/O > > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7841/MX25LM51245G,%203V,%20512Mb,%20v1.1.pdf > > > > MX25UM : 1.8V Octal I/O > > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7525/MX25UM51245G%20Extreme%20Speed,%201.8V,%20512Mb,%20v1.0.pdf > > > > MX66LM : 3.0V Octal I/O with stacked die > > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7929/MX66LM1G45G,%203V,%201Gb,%20v1.1.pdf > > > > MX66UM : 1.8V Octal I/O with stacked die > > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7721/MX66UM1G45G,%201.8V,%201Gb,%20v1.1.pdf > > > > MX25LW : 3.0V Octal I/O with Read-while-Write > > MX25UW : 1.8V Octal I/O with Read-while-Write > > MX66LW : 3.0V Octal I/O with Read-while-Write and stack die > > MX66UW : 1.8V Octal I/O with Read-while-Write and stack die > > > > About LW/UW series, please contact us freely if you have any > > questions. For adding Octal NOR Flash IDs, we have validated > > each Flash on plateform zynq-picozed. > > > > Signed-off-by: JaimeLiao <jaimeliao.tw@gmail.com> > > --- > > drivers/mtd/spi/spi-nor-ids.c | 22 +++++++++++++++++++++- > > 1 file changed, 21 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c > > index cb3a08872d..5c13ea3a78 100644 > > --- a/drivers/mtd/spi/spi-nor-ids.c > > +++ b/drivers/mtd/spi/spi-nor-ids.c > > @@ -169,7 +169,27 @@ const struct flash_info spi_nor_ids[] = { > > { INFO("mx66l1g45g", 0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, > > { INFO("mx25l1633e", 0xc22415, 0, 64 * 1024, 32, SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | SECT_4K) }, > > { INFO("mx25r6435f", 0xc22817, 0, 64 * 1024, 128, SECT_4K) }, > > - { INFO("mx66uw2g345g", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx66uw2g345gx0", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx66lm1g45g", 0xc2853b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > which one of all these flashes (including the ones from below) support > SFDP and which not? Which can discover the octal dtr method by parsing > SFDP and which not? Depending on these those flash_info flags may change. I agree that we need a method for octal dtr support on flash which didn't include SFDP but the patch of method is separate with Octal DTR patch. > Why do you need SPI_NOR_4B_OPCODES, can't this support be discovered > when parsing SFDP? How about SECT_4K? > > I know for sure there are variants of mx66lm1g45g that do not support > SFDP, and flavors that do support SFDP. How you'll differentiate between > the two flavors of the same flash? > > I chose to SKIP SFDP parsing for mx66lm1g45g as there's no infrastructure > to handle its case, neither in linux, nor u-boot. > Here's what I proposed for now: > https://lore.kernel.org/all/20211103234950.202289-3-tudor.ambarus@microchip.com/ > > > Cheers, > ta > > > + { INFO("mx25lm51245g", 0xc2853a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25lw51245g", 0xc2863a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25lm25645g", 0xc28539, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx66um2g45g", 0xc2803c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx66uw2g345g", 0xc2843c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx66um1g45g", 0xc2803b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx66uw1g45g", 0xc2813b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25um51245g", 0xc2803a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25uw51245g", 0xc2813a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25uw51345g", 0xc2843a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25um25645g", 0xc28039, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25uw25645g", 0xc28139, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25um25345g", 0xc28339, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25uw25345g", 0xc28439, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25uw12845g", 0xc28138, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25uw12a45g", 0xc28938, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25uw12345g", 0xc28438, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25uw6445g", 0xc28137, 0, 2 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > + { INFO("mx25uw6345g", 0xc28437, 0, 2 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, > > #endif > > > > #ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ > > -- > > 2.17.1 > > >
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index cb3a08872d..5c13ea3a78 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -169,7 +169,27 @@ const struct flash_info spi_nor_ids[] = { { INFO("mx66l1g45g", 0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { INFO("mx25l1633e", 0xc22415, 0, 64 * 1024, 32, SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | SECT_4K) }, { INFO("mx25r6435f", 0xc22817, 0, 64 * 1024, 128, SECT_4K) }, - { INFO("mx66uw2g345g", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx66uw2g345gx0", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx66lm1g45g", 0xc2853b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25lm51245g", 0xc2853a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25lw51245g", 0xc2863a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25lm25645g", 0xc28539, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx66um2g45g", 0xc2803c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx66uw2g345g", 0xc2843c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx66um1g45g", 0xc2803b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx66uw1g45g", 0xc2813b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25um51245g", 0xc2803a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25uw51245g", 0xc2813a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25uw51345g", 0xc2843a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25um25645g", 0xc28039, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25uw25645g", 0xc28139, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25um25345g", 0xc28339, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25uw25345g", 0xc28439, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25uw12845g", 0xc28138, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25uw12a45g", 0xc28938, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25uw12345g", 0xc28438, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25uw6445g", 0xc28137, 0, 2 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mx25uw6345g", 0xc28437, 0, 2 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, #endif #ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
Adding Macronix Octal flash for Octal DTR support. The octaflash series can be divided into the following types: MX25 series : Serial NOR Flash. MX66 series : Serial NOR Flash with stacked die.(Size larger than 1Gb) LM/UM series : Up to 250MHz clock frequency with both DTR/STR operation. LW/UW series : Support simultaneous Read-while-Write operation in multiple bank architecture. Read-while-write feature which means read data one bank while another bank is programing or erasing. MX25LM : 3.0V Octal I/O -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7841/MX25LM51245G,%203V,%20512Mb,%20v1.1.pdf MX25UM : 1.8V Octal I/O -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7525/MX25UM51245G%20Extreme%20Speed,%201.8V,%20512Mb,%20v1.0.pdf MX66LM : 3.0V Octal I/O with stacked die -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7929/MX66LM1G45G,%203V,%201Gb,%20v1.1.pdf MX66UM : 1.8V Octal I/O with stacked die -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7721/MX66UM1G45G,%201.8V,%201Gb,%20v1.1.pdf MX25LW : 3.0V Octal I/O with Read-while-Write MX25UW : 1.8V Octal I/O with Read-while-Write MX66LW : 3.0V Octal I/O with Read-while-Write and stack die MX66UW : 1.8V Octal I/O with Read-while-Write and stack die About LW/UW series, please contact us freely if you have any questions. For adding Octal NOR Flash IDs, we have validated each Flash on plateform zynq-picozed. Signed-off-by: JaimeLiao <jaimeliao.tw@gmail.com> --- drivers/mtd/spi/spi-nor-ids.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)