diff mbox series

[08/14] Convert CONFIG_SYS_NAND_5_ADDR_CYCLE to Kconfig

Message ID 20210922185039.30707-8-trini@konsulko.com
State Accepted
Commit 4884d829d72e58d3448df46325699cdc2151686e
Delegated to: Tom Rini
Headers show
Series [01/14] rk3308: Remove unused NAND defines | expand

Commit Message

Tom Rini Sept. 22, 2021, 6:50 p.m. UTC 
This converts the following to Kconfig:
   CONFIG_SYS_NAND_5_ADDR_CYCLE

Signed-off-by: Tom Rini <trini@konsulko.com>
---
 configs/devkit3250_defconfig                    | 1 +
 drivers/mtd/nand/raw/Kconfig                    | 9 +++++++++
 include/configs/am335x_evm.h                    | 1 -
 include/configs/am335x_guardian.h               | 3 ---
 include/configs/am335x_igep003x.h               | 1 -
 include/configs/am3517_evm.h                    | 1 -
 include/configs/am43xx_evm.h                    | 1 -
 include/configs/at91sam9m10g45ek.h              | 1 -
 include/configs/at91sam9n12ek.h                 | 1 -
 include/configs/at91sam9x5ek.h                  | 1 -
 include/configs/baltos.h                        | 1 -
 include/configs/brppt1.h                        | 1 -
 include/configs/chiliboard.h                    | 1 -
 include/configs/cm_t335.h                       | 1 -
 include/configs/cm_t43.h                        | 1 -
 include/configs/colibri_imx7.h                  | 1 -
 include/configs/corvus.h                        | 1 -
 include/configs/da850evm.h                      | 1 -
 include/configs/devkit8000.h                    | 1 -
 include/configs/dra7xx_evm.h                    | 1 -
 include/configs/gardena-smart-gateway-at91sam.h | 2 --
 include/configs/imx6-engicam.h                  | 1 -
 include/configs/imx6_logic.h                    | 1 -
 include/configs/mx6sabreauto.h                  | 1 -
 include/configs/mx6sxsabreauto.h                | 1 -
 include/configs/mx7dsabresd.h                   | 1 -
 include/configs/mxs.h                           | 1 -
 include/configs/omap3_beagle.h                  | 1 -
 include/configs/omap3_evm.h                     | 1 -
 include/configs/omap3_igep00x0.h                | 1 -
 include/configs/omap3_logic.h                   | 1 -
 include/configs/omapl138_lcdk.h                 | 1 -
 include/configs/phycore_am335x_r2.h             | 1 -
 include/configs/pm9g45.h                        | 1 -
 include/configs/sama5d3_xplained.h              | 1 -
 include/configs/sama5d3xek.h                    | 1 -
 include/configs/sama5d4_xplained.h              | 1 -
 include/configs/sama5d4ek.h                     | 1 -
 include/configs/siemens-am33x-common.h          | 1 -
 include/configs/smartweb.h                      | 1 -
 include/configs/tam3517-common.h                | 1 -
 include/configs/taurus.h                        | 1 -
 include/configs/ti816x_evm.h                    | 1 -
 scripts/config_whitelist.txt                    | 1 -
 44 files changed, 10 insertions(+), 45 deletions(-)

Comments

Tom Rini Oct. 6, 2021, 5:47 p.m. UTC | #1 
On Wed, Sep 22, 2021 at 02:50:33PM -0400, Tom Rini wrote:

> This converts the following to Kconfig:
>    CONFIG_SYS_NAND_5_ADDR_CYCLE
> 
> Signed-off-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 4e90af6fdadd..dc85a8419831 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -57,6 +57,7 @@  CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
 CONFIG_SYS_NAND_OOBSIZE=0x40
+# CONFIG_SYS_NAND_5_ADDR_CYCLE is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_ADDR=31
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 006ed80a1112..98d09f1e64e5 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -421,6 +421,15 @@  config SYS_NAND_MAX_CHIPS
 
 if SPL
 
+config SYS_NAND_5_ADDR_CYCLE
+	bool "Wait 5 address cycles during NAND commands"
+	depends on SPL_NAND_AM33XX_BCH || SPL_NAND_SIMPLE || \
+		(SPL_NAND_SUPPORT && NAND_ATMEL)
+	default y
+	help
+	  Some controllers require waiting for 5 address cycles when issuing
+	  some commands, on NAND chips larger than 128MiB.
+
 choice
 	prompt "NAND bad block marker/indicator positon in the OOB"
 	depends on SPL_NAND_AM33XX_BCH || SPL_NAND_DENALI || SPL_NAND_SIMPLE || \
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index a8ee559825cf..ec34992b2dfe 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -180,7 +180,6 @@ 
 
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h
index 087b2d0e6dc6..43b83630004c 100644
--- a/include/configs/am335x_guardian.h
+++ b/include/configs/am335x_guardian.h
@@ -106,9 +106,6 @@ 
 #define CONFIG_SYS_BOOTCOUNT_LE
 
 #ifdef CONFIG_MTD_RAW_NAND
-
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
 #define CONFIG_SYS_NAND_ECCPOS  {   2,   3,   4,   5,   6,   7,   8,   9, \
 			 10,  11,  12,  13,  14,  15,  16,  17,  18,  19, \
 			 20,  21,  22,  23,  24,  25,  26,  27,  28,  29, \
diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
index 71ecd554b015..ed2685d19e3c 100644
--- a/include/configs/am335x_igep003x.h
+++ b/include/configs/am335x_igep003x.h
@@ -106,7 +106,6 @@ 
 #define CONFIG_SYS_NAND_ONFI_DETECTION	1
 
 /* NAND config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index b70c64f1b2af..1e9dfaf7e898 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -34,7 +34,6 @@ 
 
 /* Board NAND Info. */
 #ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, 10, \
 					 11, 12, 13, 14, 16, 17, 18, 19, 20, \
 					 21, 22, 23, 24, 25, 26, 27, 28, 30, \
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 32b42559602a..38eeeedeef97 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -160,7 +160,6 @@ 
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 714710327c89..6f75ca5dcee7 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -95,7 +95,6 @@ 
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_ECCSIZE		256
 #define CONFIG_SYS_NAND_ECCBYTES	3
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 2611f5b16a0f..48ec065a341d 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -115,6 +115,5 @@ 
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #endif
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 08ce67a5e6c8..798a10041194 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -98,6 +98,5 @@ 
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #endif
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 8c5d1e77314f..8ada88dbf85f 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -209,7 +209,6 @@ 
 #ifndef CONFIG_NOR_BOOT
 
 #ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 2f499b39945d..1dfe7d0473bd 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -146,7 +146,6 @@  NANDTGTS \
 #define CONFIG_SYS_NAND_BASE		0x8000000
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, \
 					10, 11, 12, 13, 14, 15, 16, 17, \
 					18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index 704b2e61a8ac..ed918a7cf254 100644
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -123,7 +123,6 @@ 
 #define CONFIG_SYS_BOOTCOUNT_BE
 
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index c531ab4ae0ac..5ffb760b2fc7 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -87,7 +87,6 @@ 
 /* Network. */
 
 /* NAND support */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index 256a0d01f411..6e1ac192e64a 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -24,7 +24,6 @@ 
 
 /* NAND support */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 650936643966..298442057c56 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -188,7 +188,6 @@ 
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
 #endif
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 027a1c334121..de432a4ff78e 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -97,7 +97,6 @@ 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_ECCSIZE		256
 #define CONFIG_SYS_NAND_ECCBYTES	3
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 068e5f6f03be..f7c5d400cf92 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -121,7 +121,6 @@ 
 #undef CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_DST	0xc1080000
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 89221a8429ac..66c8cd2b6217 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -133,7 +133,6 @@ 
 /* Defines for SPL */
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
 						10, 11, 12, 13}
 
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index b047dcce0b12..3056a19f4706 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -85,7 +85,6 @@ 
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h
index d69f2a0dc954..45414f9e61fe 100644
--- a/include/configs/gardena-smart-gateway-at91sam.h
+++ b/include/configs/gardena-smart-gateway-at91sam.h
@@ -60,8 +60,6 @@ 
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
 #define CONFIG_SPL_PAD_TO		CONFIG_SYS_NAND_U_BOOT_OFFS
 #define CONFIG_SYS_SPL_LEN		CONFIG_SPL_PAD_TO
 
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index cf46b54718a6..3435be95bd6f 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -137,7 +137,6 @@ 
 #ifdef CONFIG_NAND_MXS
 # define CONFIG_SYS_MAX_NAND_DEVICE	1
 # define CONFIG_SYS_NAND_BASE		0x40000000
-# define CONFIG_SYS_NAND_5_ADDR_CYCLE
 # define CONFIG_SYS_NAND_ONFI_DETECTION
 # define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 # define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
index e49370305c6c..520cc176012b 100644
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -129,7 +129,6 @@ 
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index 5cd51a4af06f..48b8a3091956 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -52,7 +52,6 @@ 
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h
index 62b8de3c1aa4..7d8b80efdb54 100644
--- a/include/configs/mx6sxsabreauto.h
+++ b/include/configs/mx6sxsabreauto.h
@@ -106,7 +106,6 @@ 
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 42b729b40bc8..83a94f49c2d3 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -111,7 +111,6 @@ 
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 64f017ab77f8..b5c525dc786b 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -114,7 +114,6 @@ 
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x60000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #endif
 
 /* OCOTP */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 7c4bbe101a89..113c4ee0120d 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -22,7 +22,6 @@ 
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FLASH_BASE		NAND_BASE
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 88590efe71c6..8d1233c075eb 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -27,7 +27,6 @@ 
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FLASH_BASE		NAND_BASE
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 8f3c7d184dc5..ced449d7ad39 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -75,7 +75,6 @@ 
 #define CONFIG_SYS_ONENAND_BLOCK_SIZE	(128*1024)
 
 /* NAND config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 28406bfbf496..f6b5b5f986db 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -35,7 +35,6 @@ 
 #ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	  /* Max number of */
 						  /* NAND devices */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
 					 13, 14, 16, 17, 18, 19, 20, 21, 22, \
 					 23, 24, 25, 26, 27, 28, 30, 31, 32, \
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index ab095524fe01..963cc4fd8fed 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -123,7 +123,6 @@ 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
 #define CONFIG_SYS_NAND_U_BOOT_DST	0xc1080000
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
diff --git a/include/configs/phycore_am335x_r2.h b/include/configs/phycore_am335x_r2.h
index 02d124549b69..e398a018c58c 100644
--- a/include/configs/phycore_am335x_r2.h
+++ b/include/configs/phycore_am335x_r2.h
@@ -85,7 +85,6 @@ 
 
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 029a7cb62ac0..6f4bae31cd44 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -85,7 +85,6 @@ 
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_ECCSIZE		256
 #define CONFIG_SYS_NAND_ECCBYTES	3
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 44fc16404ba3..198d8dac7318 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -70,7 +70,6 @@ 
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 /* Falcon boot support on raw MMC */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x100  /* 128 KiB */
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index b54e63903def..1bca98c662b1 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -82,6 +82,5 @@ 
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #endif
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 4aba68eb1bef..652c4df4d501 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -46,6 +46,5 @@ 
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #endif
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index 64113b4c763d..4278e17afa68 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -46,6 +46,5 @@ 
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #endif
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 4d613c43614b..8fea6073d6ed 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -73,7 +73,6 @@ 
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 41881ea050cd..cc5f5380cfaf 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -166,7 +166,6 @@ 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_SIZE		(SZ_256M)
 #define CONFIG_SYS_NAND_ECCSIZE		256
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 6cc8986a1c5a..3d540978e968 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -128,7 +128,6 @@ 
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ECCPOS		{40, 41, 42, 43, 44, 45, 46, 47,\
 					 48, 49, 50, 51, 52, 53, 54, 55,\
 					 56, 57, 58, 59, 60, 61, 62, 63}
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index fef55d850c25..fa4b6f40d77f 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -168,7 +168,6 @@ 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_SIZE		(256 * SZ_1M)
 #define CONFIG_SYS_NAND_ECCSIZE		256
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 74dc9fe15566..3124c783cacd 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -57,7 +57,6 @@ 
 /* NAND: SPL related configs */
 
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 3181c984d00a..add47458ab48 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -2433,7 +2433,6 @@  CONFIG_SYS_MX7_HCLK
 CONFIG_SYS_MXS_VDD5V_ONLY
 CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 CONFIG_SYS_NAND_4_ADDR_CYCLE
-CONFIG_SYS_NAND_5_ADDR_CYCLE
 CONFIG_SYS_NAND_ACTL_ALE
 CONFIG_SYS_NAND_ACTL_CLE
 CONFIG_SYS_NAND_ACTL_DELAY