diff mbox series

[3/6] arm: dts: ls1028a: declare the fixed-link speeds for the internal ENETC ports

Message ID 20210617143554.2104712-4-vladimir.oltean@nxp.com
State Superseded
Delegated to: Priyanka Jain
Headers show
Series Fixes for the NXP LS1028A-QDS boards | expand

Commit Message

Vladimir Oltean June 17, 2021, 2:35 p.m. UTC 
To comply with the device tree bindings expectations for an Ethernet
controller, as well as to simplify the driver code, declare fixed-link
nodes for the internal ENETC ports (attached to the mscc_felix switch).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 arch/arm/dts/fsl-ls1028a.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index c7c725a4fc84..21f4ef78a059 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -144,12 +144,22 @@ 
 			reg = <0x000200 0 0 0 0>;
 			status = "okay";
 			phy-mode = "internal";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+			};
 		};
 		mdio0: pci@0,3 {
 			#address-cells=<0>;
 			#size-cells=<1>;
 			reg = <0x000300 0 0 0 0>;
 			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
 		};
 
 		mscc_felix: pci@0,5 {