@@ -823,7 +823,8 @@ static int __mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value,
value);
return -EIO;
}
- if (!ret && (status & MMC_STATUS_RDY_FOR_DATA))
+ if (!ret && (status & MMC_STATUS_RDY_FOR_DATA) &&
+ (status & MMC_STATUS_CURR_STATE) == MMC_STATE_TRANS)
return 0;
udelay(100);
} while (get_timer(start) < timeout_ms);
@@ -178,6 +178,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx)
#define MMC_STATUS_ERROR (1 << 19)
#define MMC_STATE_PRG (7 << 9)
+#define MMC_STATE_TRANS (4 << 9)
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
After issuing the switch command: Wait until 'current state' of the card status becomes 'tran'. This prevents from response timeout at the next command because of 'current state' = 'data'. Signed-off-by: Stefan Bosch <stefan_b@posteo.net> --- drivers/mmc/mmc.c | 3 ++- include/mmc.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-)