| Message ID | 20190807163552.25400-2-aford173@gmail.com |
|---|---|
| State | Superseded |
| Delegated to: | Stefano Babic |
| Headers | show |
| Series | [U-Boot,1/2] ARM: imx6qlogic: Cleanup board_init_f and enable spl_early_init | expand |
On Wed, Aug 7, 2019 at 1:36 PM Adam Ford <aford173@gmail.com> wrote: > > With spl_early_init() now enabled in board_init_f, the > preloader_console_init() function can correctly initialize the > serial port based on the device tree during SPL. > This patch enables DM_SERIAL in both U-Boot and SPL. > > Signed-off-by: Adam Ford <aford173@gmail.com> > > diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig > index b95c9783a4..2c77b9c218 100644 > --- a/configs/imx6q_logic_defconfig > +++ b/configs/imx6q_logic_defconfig > @@ -4,7 +4,6 @@ CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > -CONFIG_SYS_MALLOC_F_LEN=0x2000 Unrelated change?
On Wed, Aug 7, 2019 at 11:39 AM Fabio Estevam <festevam@gmail.com> wrote: > > On Wed, Aug 7, 2019 at 1:36 PM Adam Ford <aford173@gmail.com> wrote: > > > > With spl_early_init() now enabled in board_init_f, the > > preloader_console_init() function can correctly initialize the > > serial port based on the device tree during SPL. > > This patch enables DM_SERIAL in both U-Boot and SPL. > > > > Signed-off-by: Adam Ford <aford173@gmail.com> > > > > diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig > > index b95c9783a4..2c77b9c218 100644 > > --- a/configs/imx6q_logic_defconfig > > +++ b/configs/imx6q_logic_defconfig > > @@ -4,7 +4,6 @@ CONFIG_SYS_TEXT_BASE=0x17800000 > > CONFIG_SPL_GPIO_SUPPORT=y > > CONFIG_SPL_LIBCOMMON_SUPPORT=y > > CONFIG_SPL_LIBGENERIC_SUPPORT=y > > -CONFIG_SYS_MALLOC_F_LEN=0x2000 > > Unrelated change? It appears to be an artifact of the make savedefconfig. Newer updates make CONFIG_SYS_MALLOC_F_LEN=0x2000 by default, so savedefconfig just removed it. I will do a V2 patch serial splitting the first patch into two separate parts, then I'll remove this artifact from the 2nd patch. adam
diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index b95c9783a4..2c77b9c218 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -4,7 +4,6 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_MX6LOGICPD=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y @@ -84,6 +83,7 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_USB=y CONFIG_DM_USB=y
With spl_early_init() now enabled in board_init_f, the preloader_console_init() function can correctly initialize the serial port based on the device tree during SPL. This patch enables DM_SERIAL in both U-Boot and SPL. Signed-off-by: Adam Ford <aford173@gmail.com>