diff mbox series

[U-Boot,V2,33/51] ddr: imx8m: Fix the ddr init hang on imx8mq

Message ID 20190708015333.20411-34-peng.fan@nxp.com
State Rejected
Delegated to: Stefano Babic
Headers show
Series Support i.MX8MM/N | expand

Commit Message

Peng Fan July 8, 2019, 1:40 a.m. UTC 
From: Jacky Bai <ping.bai@nxp.com>

On, i.MX8MQ, the PLL config must be done when ddrmix
isolation is released. So move the dram pll init after
iso config done. For other i.MX8M SOC, either init pll
before or after isolation is ok.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/ddr/imx/imx8m/ddr_init.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/ddr/imx/imx8m/ddr_init.c b/drivers/ddr/imx/imx8m/ddr_init.c
index 12967583ea..d6e915c9b9 100644
--- a/drivers/ddr/imx/imx8m/ddr_init.c
+++ b/drivers/ddr/imx/imx8m/ddr_init.c
@@ -41,14 +41,14 @@  void ddr_init(struct dram_timing_info *dram_timing)
 	clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(4) |
 			     CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
 
-	initial_drate = dram_timing->fsp_msg[0].drate;
-	/* default to the frequency point 0 clock */
-	ddrphy_init_set_dfi_clk(initial_drate);
-
 	/* disable iso */
 	reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
 	reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
 
+	initial_drate = dram_timing->fsp_msg[0].drate;
+	/* default to the frequency point 0 clock */
+	ddrphy_init_set_dfi_clk(initial_drate);
+
 	/* D-aasert the presetn */
 	reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);