diff mbox series

[U-Boot,8/8] rockchip: rk3288: make both evb variants use atf

Message ID 20190405083013.5473-9-heiko@sntech.de
State Changes Requested
Delegated to: Kever Yang
Headers show
Series arm-trusted-firmware support for rk3288 | expand

Commit Message

Heiko Stuebner April 5, 2019, 8:30 a.m. UTC 
Enable both rk3288-evb variants to load an ATF binary between
spl and u-boot proper.

Doing the regular spl->u-boot load of course still stays possible
with this change.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 board/rockchip/evb_rk3288/evb-rk3288.c    | 12 +++++-
 board/rockchip/evb_rk3288/fit_spl_atf.its | 52 +++++++++++++++++++++++
 configs/evb-rk3288-act8846_defconfig      |  9 +++-
 configs/evb-rk3288-rk808_defconfig        |  9 +++-
 4 files changed, 77 insertions(+), 5 deletions(-)
 create mode 100644 board/rockchip/evb_rk3288/fit_spl_atf.its

Comments

Kever Yang May 7, 2019, 2:28 a.m. UTC | #1 
Hi Heiko,


On 04/05/2019 04:30 PM, Heiko Stuebner wrote:
> Enable both rk3288-evb variants to load an ATF binary between
> spl and u-boot proper.

Does this the same as aarch64 boot/load flow?
tpl->spl->atf->u-boot

>
> Doing the regular spl->u-boot load of course still stays possible
> with this change.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  board/rockchip/evb_rk3288/evb-rk3288.c    | 12 +++++-
>  board/rockchip/evb_rk3288/fit_spl_atf.its | 52 +++++++++++++++++++++++

Is it possible to re-use arch/arm/mach-rockchip/make_fit_atf.py?

>  configs/evb-rk3288-act8846_defconfig      |  9 +++-
>  configs/evb-rk3288-rk808_defconfig        |  9 +++-
>  4 files changed, 77 insertions(+), 5 deletions(-)
>  create mode 100644 board/rockchip/evb_rk3288/fit_spl_atf.its
>
> diff --git a/board/rockchip/evb_rk3288/evb-rk3288.c b/board/rockchip/evb_rk3288/evb-rk3288.c
> index ec1d03c86c..05aea66db6 100644
> --- a/board/rockchip/evb_rk3288/evb-rk3288.c
> +++ b/board/rockchip/evb_rk3288/evb-rk3288.c
> @@ -15,4 +15,14 @@ void board_boot_order(u32 *spl_boot_list)
>  	spl_boot_list[1] = BOOT_DEVICE_MMC1;
>  }
>  
> -#endif
> \ No newline at end of file
> +#endif
> +
> +#ifdef CONFIG_SPL_LOAD_FIT
> +int board_fit_config_name_match(const char *name)
> +{
> +	/* Just empty function now - can't decide what to choose */
> +	debug("%s: %s\n", __func__, name);
> +
> +	return 0;
> +}
> +#endif
> diff --git a/board/rockchip/evb_rk3288/fit_spl_atf.its b/board/rockchip/evb_rk3288/fit_spl_atf.its
> new file mode 100644
> index 0000000000..67aff095d6
> --- /dev/null
> +++ b/board/rockchip/evb_rk3288/fit_spl_atf.its
> @@ -0,0 +1,52 @@
> +/* SPDX-License-Identifier: GPL-2.0+ OR X11 */
> +/*
> + * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
> + *
> + * Minimal dts for a SPL FIT image payload.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> +	description = "FIT image with U-Boot proper, ATF bl32, DTB";

Why you name the ATF bl32, isn't it bl31?

Thanks,
- Kever
> +	#address-cells = <1>;
> +
> +	images {
> +		uboot {
> +			description = "U-Boot (64-bit)";
> +			data = /incbin/("../../../u-boot-nodtb.bin");
> +			type = "standalone";
> +			os = "U-Boot";
> +			arch = "arm64";
> +			compression = "none";
> +			load = <0x00200000>;
> +		};
> +		atf {
> +			description = "ARM Trusted Firmware";
> +			data = /incbin/("../../../bl32-rk3288.bin");
> +			type = "firmware";
> +			os = "arm-trusted-firmware";
> +			arch = "arm64";
> +			compression = "none";
> +			load = <0x00100000>;
> +			entry = <0x00100000>;
> +		};
> +
> +		fdt {
> +			description = "RK3288-EVB flat device-tree";
> +			data = /incbin/("../../../u-boot.dtb");
> +			type = "flat_dt";
> +			compression = "none";
> +		};
> +	};
> +
> +	configurations {
> +		default = "conf";
> +		conf {
> +			description = "Rockchip RK3288-EVB";
> +			firmware = "atf";
> +			loadables = "uboot";
> +			fdt = "fdt";
> +		};
> +	};
> +};
> diff --git a/configs/evb-rk3288-act8846_defconfig b/configs/evb-rk3288-act8846_defconfig
> index 9c7be78ad7..0fcdaaa697 100644
> --- a/configs/evb-rk3288-act8846_defconfig
> +++ b/configs/evb-rk3288-act8846_defconfig
> @@ -1,21 +1,26 @@
>  CONFIG_ARM=y
>  CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_SYS_TEXT_BASE=0x00100000
> +CONFIG_SYS_TEXT_BASE=0x00200000
>  CONFIG_SYS_MALLOC_F_LEN=0x2000
>  CONFIG_ROCKCHIP_RK3288=y
>  CONFIG_TARGET_EVB_RK3288=y
>  CONFIG_DEBUG_UART_BASE=0xff690000
>  CONFIG_DEBUG_UART_CLOCK=24000000
> -CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_SPL_STACK_R_ADDR=0x600000
>  CONFIG_DEBUG_UART=y
>  CONFIG_NR_DRAM_BANKS=1
>  # CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_SOURCE="board/rockchip/evb_rk3288/fit_spl_atf.its"
>  CONFIG_SILENT_CONSOLE=y
>  CONFIG_DEFAULT_FDT_FILE="rk3288-evb-act8846.dtb"
>  # CONFIG_DISPLAY_CPUINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>  CONFIG_SPL_STACK_R=y
>  CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
> +CONFIG_SPL_ATF=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_I2C=y
> diff --git a/configs/evb-rk3288-rk808_defconfig b/configs/evb-rk3288-rk808_defconfig
> index 73d30c9958..f6b9ce12a1 100644
> --- a/configs/evb-rk3288-rk808_defconfig
> +++ b/configs/evb-rk3288-rk808_defconfig
> @@ -1,21 +1,26 @@
>  CONFIG_ARM=y
>  CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_SYS_TEXT_BASE=0x00100000
> +CONFIG_SYS_TEXT_BASE=0x00200000
>  CONFIG_SYS_MALLOC_F_LEN=0x2000
>  CONFIG_ROCKCHIP_RK3288=y
>  CONFIG_TARGET_EVB_RK3288=y
>  CONFIG_DEBUG_UART_BASE=0xff690000
>  CONFIG_DEBUG_UART_CLOCK=24000000
> -CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_SPL_STACK_R_ADDR=0x600000
>  CONFIG_DEBUG_UART=y
>  CONFIG_NR_DRAM_BANKS=1
>  # CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_SOURCE="board/rockchip/evb_rk3288/fit_spl_atf.its"
>  CONFIG_SILENT_CONSOLE=y
>  CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
>  # CONFIG_DISPLAY_CPUINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>  CONFIG_SPL_STACK_R=y
>  CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
> +CONFIG_SPL_ATF=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_I2C=y
Heiko Stuebner May 7, 2019, 7:51 a.m. UTC | #2 
Hi Kever,

Am Dienstag, 7. Mai 2019, 03:54:32 CEST schrieb 杨凯:
> 1 does aarch32 using atf the same way like aarch64? eg. the load/boot flow is:
>     tpl->spl->atf->u-boot

Yep, exactly like this - which is the beauty of using ATF :-)
Btw. core rk3288 support meanwhile also reached upstream ATF:

https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=8742f8574bcbb513480c53645dbc5b72ea5f451e


> 2 why does you name it bl32? does it should be bl31?

That is an architectural issue of ARMv7. Where ARMv8 has separate levels
for secure monitor (bl31) and secure os (bl32) on ARMv7 there is no
separate secure monitor and only the secure os level so they have to share.

For this ATF needs to be built together with its intented trust-os.
ATF itself provides sp_min as example / minimal solution, but can also
build against actual optee, with ATF providing the core psci functionality.

See
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/docs/user-guide.rst#n200
for a bit more explanation.


The small issue I see is how to name things consistently, like it doesn't
really make sense to duplicate params structs that are currently named
bl31_foo, so I reused them. One might think about bl3x_params or so,
or just keep it as bl31_params.


> 3 is it possible to re-use below script instead of dedicate its file?
> 
>     arch/arm/mach-rockchip/make_fit_atf.py

I already switched to that in my current tree, as I needed the binary
separation for pmusram code to make suspend work :-) .


Heiko


> Thanks,
> 
> - Kever
> 
> From: "Heiko Stuebner <heiko@sntech.de>"
> 
> To: "sjg <sjg@chromium.org>","philipp.tomsich <philipp.tomsich@theobroma-systems.com>"
> 
> CC: "hl <hl@rock-chips.com>","kever.yang <kever.yang@rock-chips.com>","u-boot <u-boot@lists.denx.de>","Heiko Stuebner <heiko@sntech.de>"
> 
> Sent: 2019-04-05 16:30
> 
> Subject: [PATCH 8/8] rockchip: rk3288: make both evb variants use atf
> 
> Enable both rk3288-evb variants to load an ATF binary between
> spl and u-boot proper.
> 
> Doing the regular spl->u-boot load of course still stays possible
> with this change.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> board/rockchip/evb_rk3288/evb-rk3288.c    | 12 +++++-
> board/rockchip/evb_rk3288/fit_spl_atf.its | 52 +++++++++++++++++++++++
> configs/evb-rk3288-act8846_defconfig      |  9 +++-
> configs/evb-rk3288-rk808_defconfig        |  9 +++-
> 4 files changed, 77 insertions(+), 5 deletions(-)
> create mode 100644 board/rockchip/evb_rk3288/fit_spl_atf.its
> 
> diff --git a/board/rockchip/evb_rk3288/evb-rk3288.c b/board/rockchip/evb_rk3288/evb-rk3288.c
> index ec1d03c86c..05aea66db6 100644
> --- a/board/rockchip/evb_rk3288/evb-rk3288.c
> +++ b/board/rockchip/evb_rk3288/evb-rk3288.c
> @@ -15,4 +15,14 @@ void board_boot_order(u32 *spl_boot_list)
> spl_boot_list[1] = BOOT_DEVICE_MMC1;
> }
> 
> -#endif
> \ No newline at end of file
> +#endif
> +
> +#ifdef CONFIG_SPL_LOAD_FIT
> +int board_fit_config_name_match(const char *name)
> +{
> +	/* Just empty function now - can't decide what to choose */
> +	debug("%s: %s\n", __func__, name);
> +
> +	return 0;
> +}
> +#endif
> diff --git a/board/rockchip/evb_rk3288/fit_spl_atf.its b/board/rockchip/evb_rk3288/fit_spl_atf.its
> new file mode 100644
> index 0000000000..67aff095d6
> --- /dev/null
> +++ b/board/rockchip/evb_rk3288/fit_spl_atf.its
> @@ -0,0 +1,52 @@
> +/* SPDX-License-Identifier: GPL-2.0+ OR X11 */
> +/*
> + * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
> + *
> + * Minimal dts for a SPL FIT image payload.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> +	description = "FIT image with U-Boot proper, ATF bl32, DTB";
> +	#address-cells = <1>;
> +
> +	images {
> +		uboot {
> +			description = "U-Boot (64-bit)";
> +			data = /incbin/("../../../u-boot-nodtb.bin");
> +			type = "standalone";
> +			os = "U-Boot";
> +			arch = "arm64";
> +			compression = "none";
> +			load = <0x00200000>;
> +		};
> +		atf {
> +			description = "ARM Trusted Firmware";
> +			data = /incbin/("../../../bl32-rk3288.bin");
> +			type = "firmware";
> +			os = "arm-trusted-firmware";
> +			arch = "arm64";
> +			compression = "none";
> +			load = <0x00100000>;
> +			entry = <0x00100000>;
> +		};
> +
> +		fdt {
> +			description = "RK3288-EVB flat device-tree";
> +			data = /incbin/("../../../u-boot.dtb");
> +			type = "flat_dt";
> +			compression = "none";
> +		};
> +	};
> +
> +	configurations {
> +		default = "conf";
> +		conf {
> +			description = "Rockchip RK3288-EVB";
> +			firmware = "atf";
> +			loadables = "uboot";
> +			fdt = "fdt";
> +		};
> +	};
> +};
> diff --git a/configs/evb-rk3288-act8846_defconfig b/configs/evb-rk3288-act8846_defconfig
> index 9c7be78ad7..0fcdaaa697 100644
> --- a/configs/evb-rk3288-act8846_defconfig
> +++ b/configs/evb-rk3288-act8846_defconfig
> @@ -1,21 +1,26 @@
> CONFIG_ARM=y
> CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_SYS_TEXT_BASE=0x00100000
> +CONFIG_SYS_TEXT_BASE=0x00200000
> CONFIG_SYS_MALLOC_F_LEN=0x2000
> CONFIG_ROCKCHIP_RK3288=y
> CONFIG_TARGET_EVB_RK3288=y
> CONFIG_DEBUG_UART_BASE=0xff690000
> CONFIG_DEBUG_UART_CLOCK=24000000
> -CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> # CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_SOURCE="board/rockchip/evb_rk3288/fit_spl_atf.its"
> CONFIG_SILENT_CONSOLE=y
> CONFIG_DEFAULT_FDT_FILE="rk3288-evb-act8846.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
> +CONFIG_SPL_ATF=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_I2C=y
> diff --git a/configs/evb-rk3288-rk808_defconfig b/configs/evb-rk3288-rk808_defconfig
> index 73d30c9958..f6b9ce12a1 100644
> --- a/configs/evb-rk3288-rk808_defconfig
> +++ b/configs/evb-rk3288-rk808_defconfig
> @@ -1,21 +1,26 @@
> CONFIG_ARM=y
> CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_SYS_TEXT_BASE=0x00100000
> +CONFIG_SYS_TEXT_BASE=0x00200000
> CONFIG_SYS_MALLOC_F_LEN=0x2000
> CONFIG_ROCKCHIP_RK3288=y
> CONFIG_TARGET_EVB_RK3288=y
> CONFIG_DEBUG_UART_BASE=0xff690000
> CONFIG_DEBUG_UART_CLOCK=24000000
> -CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> # CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_SOURCE="board/rockchip/evb_rk3288/fit_spl_atf.its"
> CONFIG_SILENT_CONSOLE=y
> CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
> +CONFIG_SPL_ATF=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_I2C=y
>
diff mbox series

Patch

diff --git a/board/rockchip/evb_rk3288/evb-rk3288.c b/board/rockchip/evb_rk3288/evb-rk3288.c
index ec1d03c86c..05aea66db6 100644
--- a/board/rockchip/evb_rk3288/evb-rk3288.c
+++ b/board/rockchip/evb_rk3288/evb-rk3288.c
@@ -15,4 +15,14 @@  void board_boot_order(u32 *spl_boot_list)
 	spl_boot_list[1] = BOOT_DEVICE_MMC1;
 }
 
-#endif
\ No newline at end of file
+#endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	/* Just empty function now - can't decide what to choose */
+	debug("%s: %s\n", __func__, name);
+
+	return 0;
+}
+#endif
diff --git a/board/rockchip/evb_rk3288/fit_spl_atf.its b/board/rockchip/evb_rk3288/fit_spl_atf.its
new file mode 100644
index 0000000000..67aff095d6
--- /dev/null
+++ b/board/rockchip/evb_rk3288/fit_spl_atf.its
@@ -0,0 +1,52 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ OR X11 */
+/*
+ * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * Minimal dts for a SPL FIT image payload.
+ */
+
+/dts-v1/;
+
+/ {
+	description = "FIT image with U-Boot proper, ATF bl32, DTB";
+	#address-cells = <1>;
+
+	images {
+		uboot {
+			description = "U-Boot (64-bit)";
+			data = /incbin/("../../../u-boot-nodtb.bin");
+			type = "standalone";
+			os = "U-Boot";
+			arch = "arm64";
+			compression = "none";
+			load = <0x00200000>;
+		};
+		atf {
+			description = "ARM Trusted Firmware";
+			data = /incbin/("../../../bl32-rk3288.bin");
+			type = "firmware";
+			os = "arm-trusted-firmware";
+			arch = "arm64";
+			compression = "none";
+			load = <0x00100000>;
+			entry = <0x00100000>;
+		};
+
+		fdt {
+			description = "RK3288-EVB flat device-tree";
+			data = /incbin/("../../../u-boot.dtb");
+			type = "flat_dt";
+			compression = "none";
+		};
+	};
+
+	configurations {
+		default = "conf";
+		conf {
+			description = "Rockchip RK3288-EVB";
+			firmware = "atf";
+			loadables = "uboot";
+			fdt = "fdt";
+		};
+	};
+};
diff --git a/configs/evb-rk3288-act8846_defconfig b/configs/evb-rk3288-act8846_defconfig
index 9c7be78ad7..0fcdaaa697 100644
--- a/configs/evb-rk3288-act8846_defconfig
+++ b/configs/evb-rk3288-act8846_defconfig
@@ -1,21 +1,26 @@ 
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_SYS_TEXT_BASE=0x00100000
+CONFIG_SYS_TEXT_BASE=0x00200000
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_ROCKCHIP_RK3288=y
 CONFIG_TARGET_EVB_RK3288=y
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_DEBUG_UART=y
 CONFIG_NR_DRAM_BANKS=1
 # CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_SOURCE="board/rockchip/evb_rk3288/fit_spl_atf.its"
 CONFIG_SILENT_CONSOLE=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-evb-act8846.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
diff --git a/configs/evb-rk3288-rk808_defconfig b/configs/evb-rk3288-rk808_defconfig
index 73d30c9958..f6b9ce12a1 100644
--- a/configs/evb-rk3288-rk808_defconfig
+++ b/configs/evb-rk3288-rk808_defconfig
@@ -1,21 +1,26 @@ 
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_SYS_TEXT_BASE=0x00100000
+CONFIG_SYS_TEXT_BASE=0x00200000
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_ROCKCHIP_RK3288=y
 CONFIG_TARGET_EVB_RK3288=y
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_DEBUG_UART=y
 CONFIG_NR_DRAM_BANKS=1
 # CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_SOURCE="board/rockchip/evb_rk3288/fit_spl_atf.its"
 CONFIG_SILENT_CONSOLE=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y