@@ -369,6 +369,111 @@ class TestFunctional(unittest.TestCase):
AddNode(dtb.GetRoot(), '')
return tree
+ def _RunMicrocodeTest(self, dts_fname, nodtb_data, ucode_second=False):
+ """Handle running a test for insertion of microcode
+
+ Args:
+ dts_fname: Name of test .dts file
+ nodtb_data: Data that we expect in the first section
+ ucode_second: True if the microsecond entry is second instead of
+ third
+
+ Returns:
+ Tuple:
+ Contents of first region (U-Boot or SPL)
+ Offset and size components of microcode pointer, as inserted
+ in the above (two 4-byte words)
+ """
+ data = self._DoReadFile(dts_fname, True)
+
+ # Now check the device tree has no microcode
+ if ucode_second:
+ ucode_content = data[len(nodtb_data):]
+ ucode_pos = len(nodtb_data)
+ dtb_with_ucode = ucode_content[16:]
+ fdt_len = self.GetFdtLen(dtb_with_ucode)
+ else:
+ dtb_with_ucode = data[len(nodtb_data):]
+ fdt_len = self.GetFdtLen(dtb_with_ucode)
+ ucode_content = dtb_with_ucode[fdt_len:]
+ ucode_pos = len(nodtb_data) + fdt_len
+ fname = tools.GetOutputFilename('test.dtb')
+ with open(fname, 'wb') as fd:
+ fd.write(dtb_with_ucode)
+ dtb = fdt.FdtScan(fname)
+ ucode = dtb.GetNode('/microcode')
+ self.assertTrue(ucode)
+ for node in ucode.subnodes:
+ self.assertFalse(node.props.get('data'))
+
+ # Check that the microcode appears immediately after the Fdt
+ # This matches the concatenation of the data properties in
+ # the /microcode/update@xxx nodes in 34_x86_ucode.dts.
+ ucode_data = struct.pack('>4L', 0x12345678, 0x12345679, 0xabcd0000,
+ 0x78235609)
+ self.assertEqual(ucode_data, ucode_content[:len(ucode_data)])
+
+ # Check that the microcode pointer was inserted. It should match the
+ # expected offset and size
+ pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
+ len(ucode_data))
+ u_boot = data[:len(nodtb_data)]
+ return u_boot, pos_and_size
+
+ def _RunPackUbootSingleMicrocode(self):
+ """Test that x86 microcode can be handled correctly
+
+ We expect to see the following in the image, in order:
+ u-boot-nodtb.bin with a microcode pointer inserted at the correct
+ place
+ u-boot.dtb with the microcode
+ an empty microcode region
+ """
+ # We need the libfdt library to run this test since only that allows
+ # finding the offset of a property. This is required by
+ # Entry_u_boot_dtb_with_ucode.ObtainContents().
+ data = self._DoReadFile('35_x86_single_ucode.dts', True)
+
+ second = data[len(U_BOOT_NODTB_DATA):]
+
+ fdt_len = self.GetFdtLen(second)
+ third = second[fdt_len:]
+ second = second[:fdt_len]
+
+ ucode_data = struct.pack('>2L', 0x12345678, 0x12345679)
+ self.assertIn(ucode_data, second)
+ ucode_pos = second.find(ucode_data) + len(U_BOOT_NODTB_DATA)
+
+ # Check that the microcode pointer was inserted. It should match the
+ # expected offset and size
+ pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
+ len(ucode_data))
+ first = data[:len(U_BOOT_NODTB_DATA)]
+ self.assertEqual('nodtb with microcode' + pos_and_size +
+ ' somewhere in here', first)
+
+ def _PackUbootSplMicrocode(self, dts, ucode_second=False):
+ """Helper function for microcode tests
+
+ We expect to see the following in the image, in order:
+ u-boot-spl-nodtb.bin with a microcode pointer inserted at the
+ correct place
+ u-boot.dtb with the microcode removed
+ the microcode
+
+ Args:
+ dts: Device tree file to use for test
+ ucode_second: True if the microsecond entry is second instead of
+ third
+ """
+ # ELF file with a '_dt_ucode_base_size' symbol
+ with open(self.TestFile('u_boot_ucode_ptr')) as fd:
+ TestFunctional._MakeInputFile('spl/u-boot-spl', fd.read())
+ first, pos_and_size = self._RunMicrocodeTest(dts, U_BOOT_SPL_NODTB_DATA,
+ ucode_second=ucode_second)
+ self.assertEqual('splnodtb with microc' + pos_and_size +
+ 'ter somewhere in here', first)
+
def testRun(self):
"""Test a basic run with valid args"""
result = self._RunBinman('-h')
@@ -756,57 +861,6 @@ class TestFunctional(unittest.TestCase):
data = self._DoReadFile('33_x86-start16.dts')
self.assertEqual(X86_START16_DATA, data[:len(X86_START16_DATA)])
- def _RunMicrocodeTest(self, dts_fname, nodtb_data, ucode_second=False):
- """Handle running a test for insertion of microcode
-
- Args:
- dts_fname: Name of test .dts file
- nodtb_data: Data that we expect in the first section
- ucode_second: True if the microsecond entry is second instead of
- third
-
- Returns:
- Tuple:
- Contents of first region (U-Boot or SPL)
- Offset and size components of microcode pointer, as inserted
- in the above (two 4-byte words)
- """
- data = self._DoReadFile(dts_fname, True)
-
- # Now check the device tree has no microcode
- if ucode_second:
- ucode_content = data[len(nodtb_data):]
- ucode_pos = len(nodtb_data)
- dtb_with_ucode = ucode_content[16:]
- fdt_len = self.GetFdtLen(dtb_with_ucode)
- else:
- dtb_with_ucode = data[len(nodtb_data):]
- fdt_len = self.GetFdtLen(dtb_with_ucode)
- ucode_content = dtb_with_ucode[fdt_len:]
- ucode_pos = len(nodtb_data) + fdt_len
- fname = tools.GetOutputFilename('test.dtb')
- with open(fname, 'wb') as fd:
- fd.write(dtb_with_ucode)
- dtb = fdt.FdtScan(fname)
- ucode = dtb.GetNode('/microcode')
- self.assertTrue(ucode)
- for node in ucode.subnodes:
- self.assertFalse(node.props.get('data'))
-
- # Check that the microcode appears immediately after the Fdt
- # This matches the concatenation of the data properties in
- # the /microcode/update@xxx nodes in 34_x86_ucode.dts.
- ucode_data = struct.pack('>4L', 0x12345678, 0x12345679, 0xabcd0000,
- 0x78235609)
- self.assertEqual(ucode_data, ucode_content[:len(ucode_data)])
-
- # Check that the microcode pointer was inserted. It should match the
- # expected offset and size
- pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
- len(ucode_data))
- u_boot = data[:len(nodtb_data)]
- return u_boot, pos_and_size
-
def testPackUbootMicrocode(self):
"""Test that x86 microcode can be handled correctly
@@ -821,38 +875,6 @@ class TestFunctional(unittest.TestCase):
self.assertEqual('nodtb with microcode' + pos_and_size +
' somewhere in here', first)
- def _RunPackUbootSingleMicrocode(self):
- """Test that x86 microcode can be handled correctly
-
- We expect to see the following in the image, in order:
- u-boot-nodtb.bin with a microcode pointer inserted at the correct
- place
- u-boot.dtb with the microcode
- an empty microcode region
- """
- # We need the libfdt library to run this test since only that allows
- # finding the offset of a property. This is required by
- # Entry_u_boot_dtb_with_ucode.ObtainContents().
- data = self._DoReadFile('35_x86_single_ucode.dts', True)
-
- second = data[len(U_BOOT_NODTB_DATA):]
-
- fdt_len = self.GetFdtLen(second)
- third = second[fdt_len:]
- second = second[:fdt_len]
-
- ucode_data = struct.pack('>2L', 0x12345678, 0x12345679)
- self.assertIn(ucode_data, second)
- ucode_pos = second.find(ucode_data) + len(U_BOOT_NODTB_DATA)
-
- # Check that the microcode pointer was inserted. It should match the
- # expected offset and size
- pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
- len(ucode_data))
- first = data[:len(U_BOOT_NODTB_DATA)]
- self.assertEqual('nodtb with microcode' + pos_and_size +
- ' somewhere in here', first)
-
def testPackUbootSingleMicrocode(self):
"""Test that x86 microcode can be handled correctly with fdt_normal.
"""
@@ -968,28 +990,6 @@ class TestFunctional(unittest.TestCase):
data = self._DoReadFile('48_x86-start16-spl.dts')
self.assertEqual(X86_START16_SPL_DATA, data[:len(X86_START16_SPL_DATA)])
- def _PackUbootSplMicrocode(self, dts, ucode_second=False):
- """Helper function for microcode tests
-
- We expect to see the following in the image, in order:
- u-boot-spl-nodtb.bin with a microcode pointer inserted at the
- correct place
- u-boot.dtb with the microcode removed
- the microcode
-
- Args:
- dts: Device tree file to use for test
- ucode_second: True if the microsecond entry is second instead of
- third
- """
- # ELF file with a '_dt_ucode_base_size' symbol
- with open(self.TestFile('u_boot_ucode_ptr')) as fd:
- TestFunctional._MakeInputFile('spl/u-boot-spl', fd.read())
- first, pos_and_size = self._RunMicrocodeTest(dts, U_BOOT_SPL_NODTB_DATA,
- ucode_second=ucode_second)
- self.assertEqual('splnodtb with microc' + pos_and_size +
- 'ter somewhere in here', first)
-
def testPackUbootSplMicrocode(self):
"""Test that x86 microcode can be handled correctly in SPL"""
self._PackUbootSplMicrocode('49_x86_ucode_spl.dts')
@@ -1272,19 +1272,18 @@ class TestFunctional(unittest.TestCase):
self.assertIn("'fill' entry must have a size property",
str(e.exception))
- def _HandleGbbCommand(self, pipe_list):
- """Fake calls to the futility utility"""
- if pipe_list[0][0] == 'futility':
- fname = pipe_list[0][-1]
- # Append our GBB data to the file, which will happen every time the
- # futility command is called.
- with open(fname, 'a') as fd:
- fd.write(GBB_DATA)
- return command.CommandResult()
-
def testGbb(self):
"""Test for the Chromium OS Google Binary Block"""
- command.test_result = self._HandleGbbCommand
+ def _HandleGbbCommand(pipe_list):
+ """Fake calls to the futility utility"""
+ if pipe_list[0][0] == 'futility':
+ fname = pipe_list[0][-1]
+ # Append our GBB data to the file, which will happen every time
+ # the futility command is called.
+ with open(fname, 'a') as fd:
+ fd.write(GBB_DATA)
+ return command.CommandResult()
+ command.test_result = _HandleGbbCommand
entry_args = {
'keydir': 'devkeys',
'bmpblk': 'bmpblk.bin',
@@ -1309,17 +1308,17 @@ class TestFunctional(unittest.TestCase):
self.assertIn("Node '/binman/gbb': GBB must have a fixed size",
str(e.exception))
- def _HandleVblockCommand(self, pipe_list):
- """Fake calls to the futility utility"""
- if pipe_list[0][0] == 'futility':
- fname = pipe_list[0][3]
- with open(fname, 'w') as fd:
- fd.write(VBLOCK_DATA)
- return command.CommandResult()
-
def testVblock(self):
"""Test for the Chromium OS Verified Boot Block"""
- command.test_result = self._HandleVblockCommand
+ def _HandleVblockCommand(pipe_list):
+ """Fake calls to the futility utility"""
+ if pipe_list[0][0] == 'futility':
+ fname = pipe_list[0][3]
+ with open(fname, 'w') as fd:
+ fd.write(VBLOCK_DATA)
+ return command.CommandResult()
+
+ command.test_result = _HandleVblockCommand
entry_args = {
'keydir': 'devkeys',
}
At present some helper functions are mixed in with the tests. Tidy this up by moving them to the top. For the few helpers that don't need to be full class members, make them nested functions. Signed-off-by: Simon Glass <sjg@chromium.org> --- tools/binman/ftest.py | 249 +++++++++++++++++++++--------------------- 1 file changed, 124 insertions(+), 125 deletions(-)