diff mbox series

[U-Boot,2/3] drivers: fpga: zynqpl: fix compilation with SPL

Message ID 20180719071018.5644-2-luaraneda@gmail.com
State Accepted
Delegated to: Tom Rini
Headers show
Series [U-Boot,1/3] spl: fit: display a message when an FPGA image is loaded | expand

Commit Message

Luis Araneda July 19, 2018, 7:10 a.m. UTC 
Disable the use of function zynq_loadfs when compiling
the driver for the SPL, as the following filesystem
functions are not found by the linker:
- fs_set_blk_dev
- fs_read
- fs_set_blk_dev
- fs_read
- fs_read

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
---
 drivers/fpga/zynqpl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c
index fd37d18c7f..8e49c7010e 100644
--- a/drivers/fpga/zynqpl.c
+++ b/drivers/fpga/zynqpl.c
@@ -410,7 +410,7 @@  static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize,
 	return FPGA_SUCCESS;
 }
 
-#if defined(CONFIG_CMD_FPGA_LOADFS)
+#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD)
 static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,
 		       fpga_fs_info *fsinfo)
 {
@@ -493,7 +493,7 @@  static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,
 
 struct xilinx_fpga_op zynq_op = {
 	.load = zynq_load,
-#if defined(CONFIG_CMD_FPGA_LOADFS)
+#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD)
 	.loadfs = zynq_loadfs,
 #endif
 };