diff mbox series

[U-Boot,v3,1/7] bootcount: spl: Enable bootcount support in SPL

Message ID 20180429133633.29509-2-lukma@denx.de
State Superseded
Delegated to: Tom Rini
Headers show
Series Provide SPL support for bootcount (in the case of using falcon boot mode) | expand

Commit Message

Lukasz Majewski April 29, 2018, 1:36 p.m. UTC 
New, SPL related config option - CONFIG_SPL_BOOTCOUNT_LIMIT has been
added to allow drivers/bootcount code re-usage in SPL.

This code is necessary to use and setup bootcount in SPL in the case of
falcon boot mode.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>


---

Changes in v3:
- None

Changes in v2:
- None

 common/spl/Kconfig | 9 +++++++++
 drivers/Makefile   | 1 +
 2 files changed, 10 insertions(+)

Comments

Tom Rini April 30, 2018, 2:17 p.m. UTC | #1 
On Sun, Apr 29, 2018 at 03:36:27PM +0200, Lukasz Majewski wrote:

> New, SPL related config option - CONFIG_SPL_BOOTCOUNT_LIMIT has been
> added to allow drivers/bootcount code re-usage in SPL.
> 
> This code is necessary to use and setup bootcount in SPL in the case of
> falcon boot mode.
> 
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
> Reviewed-by: Stefan Roese <sr@denx.de>
> 
> 

Reviewed-by: Tom Rini <trini@konsulko.com>
diff mbox series

Patch

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 4d27565566..2a61d2364b 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -54,6 +54,15 @@  config SPL_BOOTROM_SUPPORT
 	  BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the
 	  boot device list, if not implemented for a given board)
 
+config SPL_BOOTCOUNT_LIMIT
+	bool "Support bootcount in SPL"
+	depends on SPL_ENV_SUPPORT
+	help
+	  On some boards, which use 'falcon' mode, it is necessary to check
+	  and increment the number of boot attempts. Such boards do not
+	  use proper U-Boot for normal boot flow and hence needs those
+	  adjustments to be done in the SPL.
+
 config SPL_RAW_IMAGE_SUPPORT
 	bool "Support SPL loading and booting of RAW images"
 	default n if (ARCH_MX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT))
diff --git a/drivers/Makefile b/drivers/Makefile
index 6846d181aa..061331eadd 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -20,6 +20,7 @@  obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
 ifndef CONFIG_TPL_BUILD
 ifdef CONFIG_SPL_BUILD
 
+obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/