| Message ID | 1584512804-16844-1-git-send-email-kuldeep.singh@nxp.com |
|---|---|
| State | Accepted |
| Commit | 6596e2e6fa4c82c02da5c7e6af50ace175226847 |
| Delegated to: | Priyanka Jain |
| Headers | show |
| Series | [v3,1/2] configs: ls2080ardb: Make MC_INIT access flash memory as per spi-mem | expand |
>-----Original Message----- >From: U-Boot <u-boot-bounces@lists.denx.de> On Behalf Of Kuldeep Singh >Sent: Wednesday, March 18, 2020 11:57 AM >To: Priyanka Jain <priyanka.jain@nxp.com>; u-boot@lists.denx.de >Cc: Kuldeep Singh <kuldeep.singh@nxp.com> >Subject: [Patch v3 1/2] configs: ls2080ardb: Make MC_INIT access flash >memory as per spi-mem > >MC_INIT command currently access spi-nor flash memory directly. As per spi- >mem framework, flash memory access via absolute addresses is no more >possible. Use flash APIs to access memory instead of directly using it. > >Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> >--- >v3: >-Use complete MC size, 1M works but MC has 3M assigned space. >-Rebase to top > >v2: >-Rebase to top >-reword commit message > > include/configs/ls2080ardb.h | 28 ++++++++++++++++++---------- > 1 file changed, 18 insertions(+), 10 deletions(-) > >diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index >c1819d2..d36e928 100644 >--- a/include/configs/ls2080ardb.h >+++ b/include/configs/ls2080ardb.h >@@ -321,11 +321,15 @@ unsigned long get_board_sys_clk(void); #include ><config_distro_bootcmd.h> > > #ifdef CONFIG_TFABOOT >-#define QSPI_MC_INIT_CMD \ >- "env exists secureboot && " \ >- "esbc_validate 0x20640000 && " \ >- "esbc_validate 0x20680000;" \ >- "fsl_mc start mc 0x20a00000 0x20e00000 \0" >+#define QSPI_MC_INIT_CMD \ >+ "sf probe 0:0; " \ >+ "sf read 0x80640000 0x640000 0x80000; " \ >+ "env exists secureboot && " \ >+ "esbc_validate 0x80640000 && " \ >+ "esbc_validate 0x80680000; " \ >+ "sf read 0x80a00000 0xa00000 0x300000; " \ >+ "sf read 0x80e00000 0xe00000 0x100000; " \ >+ "fsl_mc start mc 0x80a00000 0x80e00000 \0" > #define SD_MC_INIT_CMD \ > "mmcinfo;mmc read 0x80a00000 0x5000 0x1200;" \ > "mmc read 0x80e00000 0x7000 0x800;" \ >@@ -342,11 +346,15 @@ unsigned long get_board_sys_clk(void); > "fsl_mc start mc 0x580a00000 0x580e00000 \0" > #else > #ifdef CONFIG_QSPI_BOOT >-#define MC_INIT_CMD \ >- "mcinitcmd=env exists secureboot && " \ >- "esbc_validate 0x20640000 && " \ >- "esbc_validate 0x20680000;" \ >- "fsl_mc start mc 0x20a00000 0x20e00000 \0" >+#define MC_INIT_CMD \ >+ "mcinitcmd=sf probe 0:0; " \ >+ "sf read 0x80640000 0x640000 0x80000; " \ >+ "env exists secureboot && " \ >+ "esbc_validate 0x80640000 && " \ >+ "esbc_validate 0x80680000; " \ >+ "sf read 0x80a00000 0xa00000 0x300000; " \ >+ "sf read 0x80e00000 0xe00000 0x100000; " \ >+ "fsl_mc start mc 0x80a00000 0x80e00000 \0" > #elif defined(CONFIG_SD_BOOT) > #define MC_INIT_CMD \ > "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ >-- >2.7.4 Please confirm if you tested this change for both secure and non-secure boot Regards Priyanka
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index c1819d2..d36e928 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -321,11 +321,15 @@ unsigned long get_board_sys_clk(void); #include <config_distro_bootcmd.h> #ifdef CONFIG_TFABOOT -#define QSPI_MC_INIT_CMD \ - "env exists secureboot && " \ - "esbc_validate 0x20640000 && " \ - "esbc_validate 0x20680000;" \ - "fsl_mc start mc 0x20a00000 0x20e00000 \0" +#define QSPI_MC_INIT_CMD \ + "sf probe 0:0; " \ + "sf read 0x80640000 0x640000 0x80000; " \ + "env exists secureboot && " \ + "esbc_validate 0x80640000 && " \ + "esbc_validate 0x80680000; " \ + "sf read 0x80a00000 0xa00000 0x300000; " \ + "sf read 0x80e00000 0xe00000 0x100000; " \ + "fsl_mc start mc 0x80a00000 0x80e00000 \0" #define SD_MC_INIT_CMD \ "mmcinfo;mmc read 0x80a00000 0x5000 0x1200;" \ "mmc read 0x80e00000 0x7000 0x800;" \ @@ -342,11 +346,15 @@ unsigned long get_board_sys_clk(void); "fsl_mc start mc 0x580a00000 0x580e00000 \0" #else #ifdef CONFIG_QSPI_BOOT -#define MC_INIT_CMD \ - "mcinitcmd=env exists secureboot && " \ - "esbc_validate 0x20640000 && " \ - "esbc_validate 0x20680000;" \ - "fsl_mc start mc 0x20a00000 0x20e00000 \0" +#define MC_INIT_CMD \ + "mcinitcmd=sf probe 0:0; " \ + "sf read 0x80640000 0x640000 0x80000; " \ + "env exists secureboot && " \ + "esbc_validate 0x80640000 && " \ + "esbc_validate 0x80680000; " \ + "sf read 0x80a00000 0xa00000 0x300000; " \ + "sf read 0x80e00000 0xe00000 0x100000; " \ + "fsl_mc start mc 0x80a00000 0x80e00000 \0" #elif defined(CONFIG_SD_BOOT) #define MC_INIT_CMD \ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
MC_INIT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> --- v3: -Use complete MC size, 1M works but MC has 3M assigned space. -Rebase to top v2: -Rebase to top -reword commit message include/configs/ls2080ardb.h | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-)