Message ID | 1549205963-13458-1-git-send-email-philipp.tomsich@theobroma-systems.com |
---|---|
State | Accepted |
Delegated to: | Philipp Tomsich |
Headers | show |
Series | [U-Boot] rockchip: rk3399-puma: support Gigadevice SPI-NOR flash | expand |
On 2019-02-03 15:59, Philipp Tomsich wrote: > Over the last quarter, a part of our production has used NOR flash > from Gigadevice in addition to the Winbond parts that we typically > source. This requires the SPI_FLASH_GIGADEVICE config to be set. > > Enable SPI_FLASH_GIGADEVICE in the board's default defconfig. > > Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> > --- > > configs/puma-rk3399_defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/configs/puma-rk3399_defconfig > b/configs/puma-rk3399_defconfig > index 3fcff25..9b4bfaf 100644 > --- a/configs/puma-rk3399_defconfig > +++ b/configs/puma-rk3399_defconfig > @@ -67,6 +67,7 @@ CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_SDMA=y > CONFIG_MMC_SDHCI_ROCKCHIP=y > CONFIG_SPI_FLASH=y > +CONFIG_SPI_FLASH_GIGADEVICE=y > CONFIG_SPI_FLASH_WINBOND=y > CONFIG_PHY_MICREL=y > CONFIG_PHY_MICREL_KSZ90X1=y Reviewed-by: Klaus Goger <klaus.goger@theobroma-systems.com>
> Over the last quarter, a part of our production has used NOR flash > from Gigadevice in addition to the Winbond parts that we typically > source. This requires the SPI_FLASH_GIGADEVICE config to be set. > > Enable SPI_FLASH_GIGADEVICE in the board's default defconfig. > > Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> > Reviewed-by: Klaus Goger <klaus.goger@theobroma-systems.com> > --- > > configs/puma-rk3399_defconfig | 1 + > 1 file changed, 1 insertion(+) > Applied to u-boot-rockchip, thanks!
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 3fcff25..9b4bfaf 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -67,6 +67,7 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y
Over the last quarter, a part of our production has used NOR flash from Gigadevice in addition to the Winbond parts that we typically source. This requires the SPI_FLASH_GIGADEVICE config to be set. Enable SPI_FLASH_GIGADEVICE in the board's default defconfig. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> --- configs/puma-rk3399_defconfig | 1 + 1 file changed, 1 insertion(+)