diff mbox series

[U-Boot,v2,12/13] Migrate CONFIG_BOOTCOUNT_ALEN to Kconfig

Message ID 1518702926-18874-13-git-send-email-alex.kiernan@gmail.com
State Superseded
Delegated to: Tom Rini
Headers show
Series Convert bootcount drivers to Kconfig | expand

Commit Message

Alex Kiernan Feb. 15, 2018, 1:55 p.m. UTC
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
---

Changes in v2: None

 drivers/bootcount/Kconfig    | 9 ++++++++-
 include/configs/ids8313.h    | 1 -
 scripts/config_whitelist.txt | 1 -
 3 files changed, 8 insertions(+), 3 deletions(-)

Comments

Lukasz Majewski Feb. 16, 2018, 9:36 a.m. UTC | #1
Hi Alex,

Please add at least one sentence to the commit message (not only the
topic).


A side note - I did not received patch 13/13,

It can be found here:
http://patchwork.ozlabs.org/patch/873845/

It is also Ok (as I forgotten to remove SINGLEWORD from whitelist)..

Above patches seems to be eligible to current mailing (rc2+).

The BOOTCOUNT_ADDR conversion would need to wait for merge window, IMHO.

Thanks for your effort,

Best regards,
Ɓukasz

> Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
> ---
> 
> Changes in v2: None
> 
>  drivers/bootcount/Kconfig    | 9 ++++++++-
>  include/configs/ids8313.h    | 1 -
>  scripts/config_whitelist.txt | 1 -
>  3 files changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
> index ce26e38..1a037f2 100644
> --- a/drivers/bootcount/Kconfig
> +++ b/drivers/bootcount/Kconfig
> @@ -66,7 +66,14 @@ config BOOTCOUNT_I2C
>  	  Enable support for the bootcounter on an i2c (like RTC)
> device. CONFIG_SYS_I2C_RTC_ADDR = i2c chip address
>  	  BOOTCOUNT_ADDR = i2c addr which is used for the
> bootcounter.
> -	  CONFIG_BOOTCOUNT_ALEN = address len
> +
> +config BOOTCOUNT_ALEN
> +	int "I2C address length"
> +	default 1
> +	depends on BOOTCOUNT_I2C
> +	help
> +	  Length of the the I2C address at BOOTCOUNT_ADDR for storing
> +	  the boot counter.
>  
>  config BOOTCOUNT_AT91
>  	bool "Boot counter for Atmel AT91SAM9XE"
> diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
> index 4449e27..fb891a3 100644
> --- a/include/configs/ids8313.h
> +++ b/include/configs/ids8313.h
> @@ -515,7 +515,6 @@
>  #define CONFIG_MTD_PARTITIONS
>  
>  /* bootcount support */
> -#define CONFIG_BOOTCOUNT_ALEN	1
>  #define BOOTCOUNT_ADDR	0x9
>  
>  #define CONFIG_IMAGE_FORMAT_LEGACY
> diff --git a/scripts/config_whitelist.txt
> b/scripts/config_whitelist.txt index a8380c6..e16085b 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -147,7 +147,6 @@ CONFIG_BOARD_TYPES
>  CONFIG_BOOGER
>  CONFIG_BOOM
>  CONFIG_BOOTBLOCK
> -CONFIG_BOOTCOUNT_ALEN
>  CONFIG_BOOTFILE
>  CONFIG_BOOTMAPSZ
>  CONFIG_BOOTMODE




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Alex Kiernan Feb. 16, 2018, 9:43 a.m. UTC | #2
On Fri, Feb 16, 2018 at 9:36 AM, Lukasz Majewski <lukma@denx.de> wrote:
> Hi Alex,
>
> Please add at least one sentence to the commit message (not only the
> topic).
>

Sure.

> A side note - I did not received patch 13/13,
>
> It can be found here:
> http://patchwork.ozlabs.org/patch/873845/
>
> It is also Ok (as I forgotten to remove SINGLEWORD from whitelist)..
>
> Above patches seems to be eligible to current mailing (rc2+).
>
> The BOOTCOUNT_ADDR conversion would need to wait for merge window, IMHO.
>

I'll split the pieces apart and get the non-BOOTCOUNT_ADDR part out.
diff mbox series

Patch

diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index ce26e38..1a037f2 100644
--- a/drivers/bootcount/Kconfig
+++ b/drivers/bootcount/Kconfig
@@ -66,7 +66,14 @@  config BOOTCOUNT_I2C
 	  Enable support for the bootcounter on an i2c (like RTC) device.
 	  CONFIG_SYS_I2C_RTC_ADDR = i2c chip address
 	  BOOTCOUNT_ADDR = i2c addr which is used for the bootcounter.
-	  CONFIG_BOOTCOUNT_ALEN = address len
+
+config BOOTCOUNT_ALEN
+	int "I2C address length"
+	default 1
+	depends on BOOTCOUNT_I2C
+	help
+	  Length of the the I2C address at BOOTCOUNT_ADDR for storing
+	  the boot counter.
 
 config BOOTCOUNT_AT91
 	bool "Boot counter for Atmel AT91SAM9XE"
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 4449e27..fb891a3 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -515,7 +515,6 @@ 
 #define CONFIG_MTD_PARTITIONS
 
 /* bootcount support */
-#define CONFIG_BOOTCOUNT_ALEN	1
 #define BOOTCOUNT_ADDR	0x9
 
 #define CONFIG_IMAGE_FORMAT_LEGACY
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index a8380c6..e16085b 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -147,7 +147,6 @@  CONFIG_BOARD_TYPES
 CONFIG_BOOGER
 CONFIG_BOOM
 CONFIG_BOOTBLOCK
-CONFIG_BOOTCOUNT_ALEN
 CONFIG_BOOTFILE
 CONFIG_BOOTMAPSZ
 CONFIG_BOOTMODE