Message ID | 1491217279-3915-1-git-send-email-santan.kumar@nxp.com |
---|---|
State | Superseded |
Delegated to: | York Sun |
Headers | show |
On 04/03/2017 03:58 AM, Santan Kumar wrote: > Add CONFIG_NAND_BOOT config flag to organise > NAND_BOOT specific code in config flag like > -nand-boot specfic errata errata_rcw_src() > -CONFIG_SYS_NAND_U_BOOT_DST,etc > > Signed-off-by: Santan Kumar <santan.kumar@nxp.com> > Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> > Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> > --- > Changes for v4: > Rebased to latest codebase > Incorporated York's comments to remove CONFIG_SPL > and move CONFIG_SPL_NAND_SUPPORT to kconfig > > arch/arm/cpu/armv8/fsl-layerscape/soc.c | 2 +- > configs/ls2080aqds_nand_defconfig | 1 + > configs/ls2080ardb_nand_defconfig | 1 + > include/configs/ls2080a_common.h | 2 ++ > include/configs/ls2080aqds.h | 4 +++- > 5 files changed, 8 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > index 9e3cdd7..76e3af0 100644 > --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > @@ -134,7 +134,7 @@ void erratum_a009635(void) > > static void erratum_rcw_src(void) > { > -#if defined(CONFIG_SPL) > +#if defined(CONFIG_SPL) && defined(CONFIG_NAND_BOOT) > u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; > u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE; > u32 val; > diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig > index 2a649c5..7fe4262 100644 > --- a/configs/ls2080aqds_nand_defconfig > +++ b/configs/ls2080aqds_nand_defconfig > @@ -10,6 +10,7 @@ CONFIG_FIT=y > CONFIG_FIT_VERBOSE=y > CONFIG_OF_BOARD_SETUP=y > CONFIG_OF_STDOUT_VIA_ALIAS=y > +CONFIG_NAND_BOOT=y > CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A" Can we get rid of the extra options for NAND? I think it can be replaced by CONFIG_NAND_BOOT, can't it? I have sent a patch to get rid of the LS2080A do you don't have to worry about that. http://patchwork.ozlabs.org/patch/746782/ > CONFIG_BOOTDELAY=10 > CONFIG_SPL=y > diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig > index 81987fe..7c45541 100644 > --- a/configs/ls2080ardb_nand_defconfig > +++ b/configs/ls2080ardb_nand_defconfig > @@ -10,6 +10,7 @@ CONFIG_FIT=y > CONFIG_FIT_VERBOSE=y > CONFIG_OF_BOARD_SETUP=y > CONFIG_OF_STDOUT_VIA_ALIAS=y > +CONFIG_NAND_BOOT=y > CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A" > CONFIG_BOOTDELAY=10 > CONFIG_SPL=y > diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h > index 427f623..12078c3 100644 > --- a/include/configs/ls2080a_common.h > +++ b/include/configs/ls2080a_common.h > @@ -222,8 +222,10 @@ unsigned long long get_qixis_addr(void); > #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" > #define CONFIG_SPL_TEXT_BASE 0x1800a000 > > +#ifdef CONFIG_NAND_BOOT > #define CONFIG_SYS_NAND_U_BOOT_DST 0x80400000 > #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST > +#endif > #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 > #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 > #define CONFIG_SYS_MONITOR_LEN (640 * 1024) > diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h > index beacb99..4c48562 100644 > --- a/include/configs/ls2080aqds.h > +++ b/include/configs/ls2080aqds.h > @@ -197,7 +197,8 @@ unsigned long get_board_ddr_clk(void); > FTIM2_GPCM_TWP(0x3E)) > #define CONFIG_SYS_CS3_FTIM3 0x0 > > -#if defined(CONFIG_SPL) && defined(CONFIG_NAND) > +#if defined(CONFIG_SPL) > +#if defined(CONFIG_NAND_BOOT) This is exactly what I was thinking. So we don't need the CONFIG_NAND macro. After this patch, can you sent another clean up patch to remove other CONFIG_NAND macros? You don't have to respin this patch. York
> -----Original Message----- > From: York Sun [mailto:york.sun@nxp.com] > Sent: Monday, April 10, 2017 10:15 PM > To: Santan Kumar <santan.kumar@nxp.com>; u-boot@lists.denx.de > Cc: Priyanka Jain <priyanka.jain@nxp.com>; Abhimanyu Saini > <abhimanyu.saini@nxp.com> > Subject: Re: [PATCH 1/2][v4] armv8: ls2080a: Reorganise NAND_BOOT code > in config flag > > On 04/03/2017 03:58 AM, Santan Kumar wrote: > > Add CONFIG_NAND_BOOT config flag to organise NAND_BOOT specific > code > > in config flag like -nand-boot specfic errata errata_rcw_src() > > -CONFIG_SYS_NAND_U_BOOT_DST,etc > > > > Signed-off-by: Santan Kumar <santan.kumar@nxp.com> > > Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> > > Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> > > --- > > Changes for v4: > > Rebased to latest codebase > > Incorporated York's comments to remove CONFIG_SPL and move > > CONFIG_SPL_NAND_SUPPORT to kconfig > > > > arch/arm/cpu/armv8/fsl-layerscape/soc.c | 2 +- > > configs/ls2080aqds_nand_defconfig | 1 + > > configs/ls2080ardb_nand_defconfig | 1 + > > include/configs/ls2080a_common.h | 2 ++ > > include/configs/ls2080aqds.h | 4 +++- > > 5 files changed, 8 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > index 9e3cdd7..76e3af0 100644 > > --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > @@ -134,7 +134,7 @@ void erratum_a009635(void) > > > > static void erratum_rcw_src(void) > > { > > -#if defined(CONFIG_SPL) > > +#if defined(CONFIG_SPL) && defined(CONFIG_NAND_BOOT) > > u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; > > u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE; > > u32 val; > > diff --git a/configs/ls2080aqds_nand_defconfig > > b/configs/ls2080aqds_nand_defconfig > > index 2a649c5..7fe4262 100644 > > --- a/configs/ls2080aqds_nand_defconfig > > +++ b/configs/ls2080aqds_nand_defconfig > > @@ -10,6 +10,7 @@ CONFIG_FIT=y > > CONFIG_FIT_VERBOSE=y > > CONFIG_OF_BOARD_SETUP=y > > CONFIG_OF_STDOUT_VIA_ALIAS=y > > +CONFIG_NAND_BOOT=y > > CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A" > > Can we get rid of the extra options for NAND? I think it can be replaced by > CONFIG_NAND_BOOT, can't it? [Santan Kumar] CONFIG_NAND_BOOT has been added for the requirements of NAND boot specification While NAND is being used for NAND support specification both are using for difference purpose. > > I have sent a patch to get rid of the LS2080A do you don't have to worry > about that. http://patchwork.ozlabs.org/patch/746782/ [Santan Kumar] yes, After this patch I don't need LS2080A in extra option. Do I need to send next version to remove this or you will take care in your patch? > > > CONFIG_BOOTDELAY=10 > > CONFIG_SPL=y > > diff --git a/configs/ls2080ardb_nand_defconfig > > b/configs/ls2080ardb_nand_defconfig > > index 81987fe..7c45541 100644 > > --- a/configs/ls2080ardb_nand_defconfig > > +++ b/configs/ls2080ardb_nand_defconfig > > @@ -10,6 +10,7 @@ CONFIG_FIT=y > > CONFIG_FIT_VERBOSE=y > > CONFIG_OF_BOARD_SETUP=y > > CONFIG_OF_STDOUT_VIA_ALIAS=y > > +CONFIG_NAND_BOOT=y > > CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A" > > CONFIG_BOOTDELAY=10 > > CONFIG_SPL=y > > diff --git a/include/configs/ls2080a_common.h > > b/include/configs/ls2080a_common.h > > index 427f623..12078c3 100644 > > --- a/include/configs/ls2080a_common.h > > +++ b/include/configs/ls2080a_common.h > > @@ -222,8 +222,10 @@ unsigned long long get_qixis_addr(void); > > #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" > > #define CONFIG_SPL_TEXT_BASE 0x1800a000 > > > > +#ifdef CONFIG_NAND_BOOT > > #define CONFIG_SYS_NAND_U_BOOT_DST 0x80400000 > > #define CONFIG_SYS_NAND_U_BOOT_START > CONFIG_SYS_NAND_U_BOOT_DST > > +#endif > > #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 > > #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 > > #define CONFIG_SYS_MONITOR_LEN (640 * 1024) > > diff --git a/include/configs/ls2080aqds.h > > b/include/configs/ls2080aqds.h index beacb99..4c48562 100644 > > --- a/include/configs/ls2080aqds.h > > +++ b/include/configs/ls2080aqds.h > > @@ -197,7 +197,8 @@ unsigned long get_board_ddr_clk(void); > > FTIM2_GPCM_TWP(0x3E)) > > #define CONFIG_SYS_CS3_FTIM3 0x0 > > > > -#if defined(CONFIG_SPL) && defined(CONFIG_NAND) > > +#if defined(CONFIG_SPL) > > +#if defined(CONFIG_NAND_BOOT) > > This is exactly what I was thinking. So we don't need the CONFIG_NAND > macro. After this patch, can you sent another clean up patch to remove other > CONFIG_NAND macros? You don't have to respin this patch. > > York
On 04/11/2017 11:14 PM, Santan Kumar wrote: > > >> -----Original Message----- >> From: York Sun [mailto:york.sun@nxp.com] >> Sent: Monday, April 10, 2017 10:15 PM >> To: Santan Kumar <santan.kumar@nxp.com>; u-boot@lists.denx.de >> Cc: Priyanka Jain <priyanka.jain@nxp.com>; Abhimanyu Saini >> <abhimanyu.saini@nxp.com> >> Subject: Re: [PATCH 1/2][v4] armv8: ls2080a: Reorganise NAND_BOOT code >> in config flag >> >> On 04/03/2017 03:58 AM, Santan Kumar wrote: >>> Add CONFIG_NAND_BOOT config flag to organise NAND_BOOT specific >> code >>> in config flag like -nand-boot specfic errata errata_rcw_src() >>> -CONFIG_SYS_NAND_U_BOOT_DST,etc >>> >>> Signed-off-by: Santan Kumar <santan.kumar@nxp.com> >>> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> >>> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> >>> --- >>> Changes for v4: >>> Rebased to latest codebase >>> Incorporated York's comments to remove CONFIG_SPL and move >>> CONFIG_SPL_NAND_SUPPORT to kconfig >>> >>> arch/arm/cpu/armv8/fsl-layerscape/soc.c | 2 +- >>> configs/ls2080aqds_nand_defconfig | 1 + >>> configs/ls2080ardb_nand_defconfig | 1 + >>> include/configs/ls2080a_common.h | 2 ++ >>> include/configs/ls2080aqds.h | 4 +++- >>> 5 files changed, 8 insertions(+), 2 deletions(-) >>> >>> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c >>> b/arch/arm/cpu/armv8/fsl-layerscape/soc.c >>> index 9e3cdd7..76e3af0 100644 >>> --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c >>> +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c >>> @@ -134,7 +134,7 @@ void erratum_a009635(void) >>> >>> static void erratum_rcw_src(void) >>> { >>> -#if defined(CONFIG_SPL) >>> +#if defined(CONFIG_SPL) && defined(CONFIG_NAND_BOOT) >>> u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; >>> u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE; >>> u32 val; >>> diff --git a/configs/ls2080aqds_nand_defconfig >>> b/configs/ls2080aqds_nand_defconfig >>> index 2a649c5..7fe4262 100644 >>> --- a/configs/ls2080aqds_nand_defconfig >>> +++ b/configs/ls2080aqds_nand_defconfig >>> @@ -10,6 +10,7 @@ CONFIG_FIT=y >>> CONFIG_FIT_VERBOSE=y >>> CONFIG_OF_BOARD_SETUP=y >>> CONFIG_OF_STDOUT_VIA_ALIAS=y >>> +CONFIG_NAND_BOOT=y >>> CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A" >> >> Can we get rid of the extra options for NAND? I think it can be replaced by >> CONFIG_NAND_BOOT, can't it? > [Santan Kumar] CONFIG_NAND_BOOT has been added for the requirements of NAND boot specification > While NAND is being used for NAND support specification both are using for difference purpose. OK. I will let it go for now. In long term we will convert this option to Kconfig. >> >> I have sent a patch to get rid of the LS2080A do you don't have to worry >> about that. http://patchwork.ozlabs.org/patch/746782/ > [Santan Kumar] yes, After this patch I don't need LS2080A in extra option. > Do I need to send next version to remove this or you will take care in your patch? I will take care of it. York
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 9e3cdd7..76e3af0 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -134,7 +134,7 @@ void erratum_a009635(void) static void erratum_rcw_src(void) { -#if defined(CONFIG_SPL) +#if defined(CONFIG_SPL) && defined(CONFIG_NAND_BOOT) u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE; u32 val; diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index 2a649c5..7fe4262 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -10,6 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_NAND_BOOT=y CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A" CONFIG_BOOTDELAY=10 CONFIG_SPL=y diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig index 81987fe..7c45541 100644 --- a/configs/ls2080ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -10,6 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_NAND_BOOT=y CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A" CONFIG_BOOTDELAY=10 CONFIG_SPL=y diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 427f623..12078c3 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -222,8 +222,10 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_TEXT_BASE 0x1800a000 +#ifdef CONFIG_NAND_BOOT #define CONFIG_SYS_NAND_U_BOOT_DST 0x80400000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST +#endif #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 #define CONFIG_SYS_MONITOR_LEN (640 * 1024) diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index beacb99..4c48562 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -197,7 +197,8 @@ unsigned long get_board_ddr_clk(void); FTIM2_GPCM_TWP(0x3E)) #define CONFIG_SYS_CS3_FTIM3 0x0 -#if defined(CONFIG_SPL) && defined(CONFIG_NAND) +#if defined(CONFIG_SPL) +#if defined(CONFIG_NAND_BOOT) #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR_EARLY #define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR0_CSPR @@ -233,6 +234,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 * 1024) #define CONFIG_SYS_NAND_U_BOOT_SIZE (640 * 1024) +#endif #else #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY