diff mbox

[U-Boot] powerpc: e6500: Lock/unlock 1 cache instead of L1 as init_ram

Message ID 1488444139-16672-1-git-send-email-ruchika.gupta@nxp.com
State Superseded
Delegated to: York Sun
Headers show

Commit Message

Ruchika Gupta March 2, 2017, 8:42 a.m. UTC
Fir E6500 cores, L2 cache has been used as init_ram. L1 cache is a write
through cache on E6500.If lines are not locked in both L1 and L2 caches,
crashes are observed during secure boot. This patch locks/unlocks both L1
as well as L2 cache to prevent the crash.

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
---
 arch/powerpc/cpu/mpc85xx/start.S | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index c3e1234..b9a4cb5 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -1145,8 +1145,9 @@  switch_as:
 	li	r0,0
 1:
 	dcbz	r0,r3
-#ifdef CONFIG_E6500	/* Lock/unlock L2 cache instead of L1 */
+#ifdef CONFIG_E6500	/* Lock/unlock L2 cache long with L1 */
 	dcbtls	2, r0, r3
+	dcbtls	0, r0, r3
 #else
 	dcbtls	0, r0, r3
 #endif
@@ -1790,8 +1791,9 @@  unlock_ram_in_cache:
 	slwi	r4,r4,(10 - 1 - L1_CACHE_SHIFT)
 	mtctr	r4
 1:	dcbi	r0,r3
-#ifdef CONFIG_E6500	/* lock/unlock L2 cache instead of L1 */
+#ifdef CONFIG_E6500	/* lock/unlock L2 cache long with L1 */
 	dcblc	2, r0, r3
+	dcblc	0, r0, r3
 #else
 	dcblc	r0,r3
 #endif