Message ID | 1422795538-1123-1-git-send-email-ats@offog.org |
---|---|
State | Accepted |
Delegated to: | Hans de Goede |
Headers | show |
Hi, On 01-02-15 13:58, Adam Sampson wrote: > This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; > it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro > USB socket for OTG and another for power in, HDMI, SATA, 5V power for > SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a > MIPI camera connector. > > Like the BananaPi, this board needs GMAC_TX_DELAY set to 3 in order for > GMAC to work reliably at gigabit speeds. > > For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano > > Changed in v3: > - add CONFIG_GMAC_TX_DELAY=3, which corresponds to a patch in LinkSprite's > A20 kernel; testing shows the performance is now much better at 1000M > > Signed-off-by: Adam Sampson <ats@offog.org> Thanks for the patch, I've replaced the version in u-boot-sunxi/next with this one (resulting in a forced push). I'll likely send out a pull-req soon, so if you've any more fixes please do them as a follow-up patch. Regards, Hans > --- > board/sunxi/MAINTAINERS | 5 +++++ > configs/Linksprite_pcDuino3_Nano_defconfig | 11 +++++++++++ > 2 files changed, 16 insertions(+) > create mode 100644 configs/Linksprite_pcDuino3_Nano_defconfig > > diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS > index 9050059..44f57ad 100644 > --- a/board/sunxi/MAINTAINERS > +++ b/board/sunxi/MAINTAINERS > @@ -81,6 +81,11 @@ M: Zoltan Herpai <wigyori@uid0.hu> > S: Maintained > F: configs/Linksprite_pcDuino_defconfig > > +LINKSPRITE-PCDUINO3-NANO BOARD > +M: Adam Sampson <ats@offog.org> > +S: Maintained > +F: configs/Linksprite_pcDuino3_Nano_defconfig > + > MARSBOARD-A10 BOARD > M: Aleksei Mamlin <mamlinav@gmail.com> > S: Maintained > diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig > new file mode 100644 > index 0000000..4baba14 > --- /dev/null > +++ b/configs/Linksprite_pcDuino3_Nano_defconfig > @@ -0,0 +1,11 @@ > +CONFIG_SPL=y > +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" > +CONFIG_FDTFILE="sun7i-a20-pcduino3-nano.dtb" > +CONFIG_GMAC_TX_DELAY=3 > +CONFIG_USB1_VBUS_PIN="PH11" > ++S:CONFIG_ARM=y > ++S:CONFIG_ARCH_SUNXI=y > ++S:CONFIG_MACH_SUN7I=y > ++S:CONFIG_DRAM_CLK=408 > ++S:CONFIG_DRAM_ZQ=122 > ++S:CONFIG_DRAM_EMR1=4 >
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 9050059..44f57ad 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -81,6 +81,11 @@ M: Zoltan Herpai <wigyori@uid0.hu> S: Maintained F: configs/Linksprite_pcDuino_defconfig +LINKSPRITE-PCDUINO3-NANO BOARD +M: Adam Sampson <ats@offog.org> +S: Maintained +F: configs/Linksprite_pcDuino3_Nano_defconfig + MARSBOARD-A10 BOARD M: Aleksei Mamlin <mamlinav@gmail.com> S: Maintained diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig new file mode 100644 index 0000000..4baba14 --- /dev/null +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -0,0 +1,11 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" +CONFIG_FDTFILE="sun7i-a20-pcduino3-nano.dtb" +CONFIG_GMAC_TX_DELAY=3 +CONFIG_USB1_VBUS_PIN="PH11" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_DRAM_CLK=408 ++S:CONFIG_DRAM_ZQ=122 ++S:CONFIG_DRAM_EMR1=4
This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro USB socket for OTG and another for power in, HDMI, SATA, 5V power for SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a MIPI camera connector. Like the BananaPi, this board needs GMAC_TX_DELAY set to 3 in order for GMAC to work reliably at gigabit speeds. For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano Changed in v3: - add CONFIG_GMAC_TX_DELAY=3, which corresponds to a patch in LinkSprite's A20 kernel; testing shows the performance is now much better at 1000M Signed-off-by: Adam Sampson <ats@offog.org> --- board/sunxi/MAINTAINERS | 5 +++++ configs/Linksprite_pcDuino3_Nano_defconfig | 11 +++++++++++ 2 files changed, 16 insertions(+) create mode 100644 configs/Linksprite_pcDuino3_Nano_defconfig