Message ID | 1336060041-8803-1-git-send-email-marex@denx.de |
---|---|
State | Awaiting Upstream |
Headers | show |
diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c index 4f62142..0d13537 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c @@ -39,7 +39,7 @@ uint32_t dram_vals[] = { 0x00000000, 0x00000100, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010101, 0x01010101, - 0x000f0f01, 0x0f02010a, 0x00000000, 0x00010101, + 0x000f0f01, 0x0f02020a, 0x00000000, 0x00010101, 0x00000100, 0x00000100, 0x00000000, 0x00000002, 0x01010000, 0x05060302, 0x06005003, 0x0a0000c8, 0x02009c40, 0x0000030c, 0x0036a609, 0x031a0612,
This reverts commit 69d26d09de1cb93e0a09ca71d9f0d41a66f0756a. Apparently, this commit got mainline only because of out-of-tree port and causes breakage on board that is mainline. Revert. Reason: * The OOT board has 512MB of DRAM, enabling this additional address line enabled it to work fine with 512MB of RAM. * Every mainline port has max. 256MB of DRAM, therefore this revert has no impact on any mainline port * Though this caused a problem with new M28 board with 256MB of DRAM where the chips are wired differently. The patch-to-be-reverted caused the DRAM to behave like this: [128MB chunk #1][128MB chunk #1 again][128MB chunk #2][128MB chunk #2 again] Therefore to retain the current one-memory-init-rules-them-all situation, revert this patch until another board emerges and will actually be pushed mainline that needs different setup. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> --- arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) V2: Update description of the patch (thanks for pushing me to do better job, Detlev!)