| Message ID | 1333294142-7433-1-git-send-email-js_at_ng@scharsoft.de |
|---|---|
| State | Accepted |
| Delegated to: | Anatolij Gustschin |
| Headers | show |
Dear Jens Scharsig, > * add USB host support to eb_cpux9k2 board Did you test this too? CCing Albert, Albert do you want me to push this through staging or you'll pick this? > Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> > --- > include/configs/eb_cpux9k2.h | 14 ++++++++++++++ > 1 files changed, 14 insertions(+), 0 deletions(-) > > diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h > index 9046cf0..eb05e2a 100644 > --- a/include/configs/eb_cpux9k2.h > +++ b/include/configs/eb_cpux9k2.h > @@ -139,6 +139,8 @@ > #define CONFIG_CMD_PING > #define CONFIG_I2C_CMD_NO_FLAT > #define CONFIG_I2C_CMD_TREE > +#define CONFIG_CMD_USB > +#define CONFIG_CMD_FAT > > #define CONFIG_SYS_LONGHELP > > @@ -169,6 +171,18 @@ > /* > * Hardware drivers > */ > +#define CONFIG_USB_ATMEL > +#define CONFIG_USB_OHCI_NEW > +#define CONFIG_AT91C_PQFP_UHPBUG > +#define CONFIG_USB_STORAGE > +#define CONFIG_DOS_PARTITION > +#define CONFIG_ISO_PARTITION > +#define CONFIG_EFI_PARTITION > + > +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 > +#define CONFIG_SYS_USB_OHCI_CPU_INIT > +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 > +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" > > /* > * UART/CONSOLE Best regards, Marek Vasut
Am 2012-04-01 18:14, schrieb Marek Vasut: > Dear Jens Scharsig, > >> * add USB host support to eb_cpux9k2 board > > Did you test this too? Of course, I've test this with/against current RC1. > > CCing Albert, Albert do you want me to push this through staging or you'll pick > this? > >> Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> >> --- >> include/configs/eb_cpux9k2.h | 14 ++++++++++++++ >> 1 files changed, 14 insertions(+), 0 deletions(-) >> >> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h >> index 9046cf0..eb05e2a 100644 >> --- a/include/configs/eb_cpux9k2.h >> +++ b/include/configs/eb_cpux9k2.h >> @@ -139,6 +139,8 @@ >> #define CONFIG_CMD_PING >> #define CONFIG_I2C_CMD_NO_FLAT >> #define CONFIG_I2C_CMD_TREE >> +#define CONFIG_CMD_USB >> +#define CONFIG_CMD_FAT >> >> #define CONFIG_SYS_LONGHELP >> >> @@ -169,6 +171,18 @@ >> /* >> * Hardware drivers >> */ >> +#define CONFIG_USB_ATMEL >> +#define CONFIG_USB_OHCI_NEW >> +#define CONFIG_AT91C_PQFP_UHPBUG >> +#define CONFIG_USB_STORAGE >> +#define CONFIG_DOS_PARTITION >> +#define CONFIG_ISO_PARTITION >> +#define CONFIG_EFI_PARTITION >> + >> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 >> +#define CONFIG_SYS_USB_OHCI_CPU_INIT >> +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 >> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" >> >> /* >> * UART/CONSOLE > > Best regards, > Marek Vasut Tested-by: Jens Scharsig <js_at_ng@scharsoft.de> Best regards Jens Scharsig
Dear esw@bus-elektronik.de, > Am 2012-04-01 18:14, schrieb Marek Vasut: > > Dear Jens Scharsig, > > > >> * add USB host support to eb_cpux9k2 board > > > > Did you test this too? > > Of course, I've test this with/against current RC1. Ok, I can pick this up and push through my staging ... or does Albert want to pick it directly via -arm (which would be better)? > > CCing Albert, Albert do you want me to push this through staging or > > you'll pick this? > > > >> Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> > >> --- > >> > >> include/configs/eb_cpux9k2.h | 14 ++++++++++++++ > >> 1 files changed, 14 insertions(+), 0 deletions(-) > >> > >> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h > >> index 9046cf0..eb05e2a 100644 > >> --- a/include/configs/eb_cpux9k2.h > >> +++ b/include/configs/eb_cpux9k2.h > >> @@ -139,6 +139,8 @@ > >> > >> #define CONFIG_CMD_PING > >> #define CONFIG_I2C_CMD_NO_FLAT > >> #define CONFIG_I2C_CMD_TREE > >> > >> +#define CONFIG_CMD_USB > >> +#define CONFIG_CMD_FAT > >> > >> #define CONFIG_SYS_LONGHELP > >> > >> @@ -169,6 +171,18 @@ > >> > >> /* > >> > >> * Hardware drivers > >> */ > >> > >> +#define CONFIG_USB_ATMEL > >> +#define CONFIG_USB_OHCI_NEW > >> +#define CONFIG_AT91C_PQFP_UHPBUG > >> +#define CONFIG_USB_STORAGE > >> +#define CONFIG_DOS_PARTITION > >> +#define CONFIG_ISO_PARTITION > >> +#define CONFIG_EFI_PARTITION > >> + > >> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 > >> +#define CONFIG_SYS_USB_OHCI_CPU_INIT > >> +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 > >> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" > >> > >> /* > >> > >> * UART/CONSOLE > > > > Best regards, > > Marek Vasut > > Tested-by: Jens Scharsig <js_at_ng@scharsoft.de> > > > Best regards > > Jens Scharsig > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot Best regards, Marek Vasut
Dear Marek Vasut, > Dear esw@bus-elektronik.de, > >> Am 2012-04-01 18:14, schrieb Marek Vasut: >>> Dear Jens Scharsig, >>> >>>> * add USB host support to eb_cpux9k2 board >>> >>> Did you test this too? >> >> Of course, I've test this with/against current RC1. > > Ok, I can pick this up and push through my staging ... or does Albert want to > pick it directly via -arm (which would be better)? I don't know which is better. You are the custodians. Albert what is your opinion ? > >>> CCing Albert, Albert do you want me to push this through staging or >>> you'll pick this? >>> >>>> Signed-off-by: Jens Scharsig<js_at_ng@scharsoft.de> >>>> --- >>>> >>>> include/configs/eb_cpux9k2.h | 14 ++++++++++++++ >>>> 1 files changed, 14 insertions(+), 0 deletions(-) >>>> >>>> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h >>>> index 9046cf0..eb05e2a 100644 >>>> --- a/include/configs/eb_cpux9k2.h >>>> +++ b/include/configs/eb_cpux9k2.h >>>> @@ -139,6 +139,8 @@ >>>> >>>> #define CONFIG_CMD_PING >>>> #define CONFIG_I2C_CMD_NO_FLAT >>>> #define CONFIG_I2C_CMD_TREE >>>> >>>> +#define CONFIG_CMD_USB >>>> +#define CONFIG_CMD_FAT >>>> >>>> #define CONFIG_SYS_LONGHELP >>>> >>>> @@ -169,6 +171,18 @@ >>>> >>>> /* >>>> >>>> * Hardware drivers >>>> */ >>>> >>>> +#define CONFIG_USB_ATMEL >>>> +#define CONFIG_USB_OHCI_NEW >>>> +#define CONFIG_AT91C_PQFP_UHPBUG >>>> +#define CONFIG_USB_STORAGE >>>> +#define CONFIG_DOS_PARTITION >>>> +#define CONFIG_ISO_PARTITION >>>> +#define CONFIG_EFI_PARTITION >>>> + >>>> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 >>>> +#define CONFIG_SYS_USB_OHCI_CPU_INIT >>>> +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 >>>> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" >>>> >>>> /* >>>> >>>> * UART/CONSOLE >>> >>> Best regards, >>> Marek Vasut >> >> Tested-by: Jens Scharsig<js_at_ng@scharsoft.de> >> >> >> Best regards >> >> Jens Scharsig >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot > > Best regards, > Marek Vasut Best regards Jens Scharsig
Dear Jens Scharsig, > Dear Marek Vasut, > > > Dear esw@bus-elektronik.de, > > > >> Am 2012-04-01 18:14, schrieb Marek Vasut: > >>> Dear Jens Scharsig, > >>> > >>>> * add USB host support to eb_cpux9k2 board > >>> > >>> Did you test this too? > >> > >> Of course, I've test this with/against current RC1. > > > > Ok, I can pick this up and push through my staging ... or does Albert > > want to pick it directly via -arm (which would be better)? > > I don't know which is better. You are the custodians. Bah wah wah ... yes, we are the allmightly :-D Anyway, would you be too unhappy if we put this into next release? Since I just submitted my pullrq for -RC1 and I won't be too happy to push this into -RC2, it's way too far past merge window. > Albert what is your opinion ? > > >>> CCing Albert, Albert do you want me to push this through staging or > >>> you'll pick this? > >>> Best regards, Marek Vasut
Dear Marek Vasut, >> >>> Dear esw@bus-elektronik.de, >>> >>>> Am 2012-04-01 18:14, schrieb Marek Vasut: >>>>> Dear Jens Scharsig, >>>>> >>>>>> * add USB host support to eb_cpux9k2 board >>>>> >>>>> Did you test this too? >>>> >>>> Of course, I've test this with/against current RC1. >>> >>> Ok, I can pick this up and push through my staging ... or does Albert >>> want to pick it directly via -arm (which would be better)? >> >> I don't know which is better. You are the custodians. > > Bah wah wah ... yes, we are the allmightly :-D Anyway, would you be too unhappy > if we put this into next release? Since I just submitted my pullrq for -RC1 and LOL I have no problems to wait for next Release. I think you mean 2012.06. The patch have has first anniversary in soon. I would happy, if it gives not a second anniversary ;-) Best regards Jens Scharsig
Dear Jens Scharsig, In message <1333294142-7433-1-git-send-email-js_at_ng@scharsoft.de> you wrote: > * add USB host support to eb_cpux9k2 board > > Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> > --- > include/configs/eb_cpux9k2.h | 14 ++++++++++++++ > 1 files changed, 14 insertions(+), 0 deletions(-) Applied, thanks. Best regards, Wolfgang Denk
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 9046cf0..eb05e2a 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -139,6 +139,8 @@ #define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT #define CONFIG_SYS_LONGHELP @@ -169,6 +171,18 @@ /* * Hardware drivers */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION + +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" /* * UART/CONSOLE
* add USB host support to eb_cpux9k2 board Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> --- include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)