diff mbox

[U-Boot] mx31litekit: Fix boot with the new relocation scheme.

Message ID 1307321762-2103-1-git-send-email-festevam@gmail.com
State Accepted
Commit 4e37731a27faeba57e4814954544ce18324ae259
Delegated to: Stefano Babic
Headers show

Commit Message

Fabio Estevam June 6, 2011, 12:56 a.m. UTC 
imx31_litekit has been converted to the new relocation scheme, but it does not boot.

Make the boot functional by using board_early_init_f .

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
---
 board/logicpd/imx31_litekit/imx31_litekit.c |   17 +++++++++++------
 include/configs/imx31_litekit.h             |    1 +
 2 files changed, 12 insertions(+), 6 deletions(-)

Comments

Stefano Babic June 6, 2011, 7:39 a.m. UTC | #1 
On 06/06/2011 02:56 AM, Fabio Estevam wrote:
> imx31_litekit has been converted to the new relocation scheme, but it does not boot.
> 
> Make the boot functional by using board_early_init_f .
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> Tested-by: Magnus Lilja <lilja.magnus@gmail.com>

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic
diff mbox

Patch

diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c
index 2ed742f..9918557 100644
--- a/board/logicpd/imx31_litekit/imx31_litekit.c
+++ b/board/logicpd/imx31_litekit/imx31_litekit.c
@@ -29,21 +29,21 @@ 
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int dram_init (void)
+int dram_init(void)
 {
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-
+	/* dram_init must store complete ramsize in gd->ram_size */
+	gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+				PHYS_SDRAM_1_SIZE);
 	return 0;
 }
 
-void
-dram_init_banksize (void)
+void dram_init_banksize(void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 }
 
-int board_init (void)
+int board_early_init_f(void)
 {
 	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
 	__REG(CSCR_L(0)) = 0xa0330d01;
@@ -71,6 +71,11 @@  int board_init (void)
 	/* start SPI2 clock */
 	__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
 
+	return 0;
+}
+
+int board_init(void)
+{
 	gd->bd->bi_arch_number = MACH_TYPE_MX31LITE; /* board id for linux */
 	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */
 
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 9405f56..7ee7076 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -145,6 +145,7 @@ 
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		CSD0_BASE
 #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
+#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_SYS_SDRAM_BASE		CSD0_BASE
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR