Show patches with: Submitter = seedshope       |    Archived = No       |   98 patches
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,v3] arm: Fixed the offset for the no relocation. - - - 1 --- 2012-09-02 seedshope aaribaud Accepted
[U-Boot,V2] disk/partition: Fix the depend for all the partitions file - - - - --- 2012-08-15 seedshope wd Changes Requested
[U-Boot,14/14] S3C6400: Remove the unused variable for S3C6400 - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,13/14] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,12/14] S3C6400: clear memory init variable - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,11/14] S3c64xx: clear GPIO, Interrupt, Watchdog variable. - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,10/14] S3C64XX: Switch to use read/writel to operation clock system - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,09/14] S3C64XX: Change SROM init to use read/write operation - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,08/14] S3C6400: Delete nand_spl for S3C6400 - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,07/14] S3C6400: Adopt SPL framwork to support spl for nand flash - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,06/14] S3C64xx: mov cpu_init.S to the board directory - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,05/14] S3C64XX: reference s5p cpu time system for s3c64xx timer - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,04/14] S3C64XX: add pwm for s3c64xx support - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,03/14] S3C64XX: Use readl/writel to operate uart - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,02/14] S3C64XX: Switch to use readl/writel to operate nand flash - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,01/14] smdk6400: Move smdk6400 board from Makefile to boards.cfg - - - - --- 2012-08-15 seedshope prom Changes Requested
[U-Boot,V2] arm: Fixed the offset for the no relocation. - - - - --- 2012-08-01 seedshope Superseded
[U-Boot] arm: Fixed the offset for the no relocation. - - - - --- 2012-08-01 seedshope Superseded
[U-Boot,V3,15/15] S3C6400: Remove the unused variable for S3C6400 - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,13/15] S3C6400: clear memory init variable - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,12/15] S3c64xx: clear GPIO, Interrupt, Watchdog variable. - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,11/15] S3C64XX: Switch to use read/writel to operation clock system - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,10/15] S3C64XX: Change SROM init to use read/write operation - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,09/15] arm1176: Fixed No relocation. - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,08/15] S3C6400: Adopt SPL framwork to support spl for nand flash - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,07/15] S3C6400: Delete nand_spl for S3C6400 - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,06/15] S3C64xx: mov cpu_init.S to the board directory - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,05/15] S3C64XX: reference s5p cpu time system for s3c64xx timer - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,04/15] S3C64XX: add pwm for s3c64xx support - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,03/15] S3C64XX: Use readl/writel to operate uart - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,02/15] S3C64XX: Switch to use readl/writel to operate nand flash - - - - --- 2012-07-28 seedshope Superseded
[U-Boot,V3,01/15] smdk6400: Move smdk6400 board from Makefile to boards.cfg - - - - --- 2012-07-28 seedshope Superseded
[U-Boot] disk/partition: Fix the depend for all the partitions file - - - - --- 2012-07-21 seedshope Changes Requested
[U-Boot] SMDK6400: Add MAINTAINERS entry - - - - --- 2012-07-20 seedshope wd Accepted
[U-Boot] SMDK6400: Add MAINTAINERS entry - - - - --- 2012-07-20 seedshope Accepted
[U-Boot,V2,15/15] S3C6400: Remove the unused variable for S3C6400 - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,13/15] S3C6400: clear memory init variable - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,12/15] S3c64xx: clear GPIO, Interrupt, Watchdog variable. - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,11/15] S3C64XX: Switch to use read/writel to operation clock system - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,10/15] S3C64XX: Change SROM init to use read/write operation - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,09/15] arm1176: Fixed No relocation. - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,08/15] S3C6400: Adopt SPL framwork to support spl for nand flash - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,07/15] S3C6400: Delete nand_spl for S3C6400 - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,06/15] S3C64xx: mov cpu_init.S to the board directory - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,05/15] S3C64XX: reference s5p cpu time system for s3c64xx timer - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,03/15] S3C64XX: Use readl/writel to operate uart - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,02/15] S3C64XX: Switch to use readl/writel to operate nand flash - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V2,01/15] SMDK6400: Move smdk6400 board from Makefile to boards.cfg - - - - --- 2012-07-13 seedshope prom Changes Requested
[U-Boot,V4] arm: Fix to mistake clean the memory space 1 - - - --- 2012-07-07 seedshope aaribaud Accepted
[U-Boot,13/13] S3C6400: Clear system clock variable - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,12/13] S3C6400: clear memory init variable - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,11/13] S3c64xx: clear GPIO, Interrupt, Watchdog flag. - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,10/13] S3C64XX: Switch to use read/writel to operation clock system - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,09/13] S3C64XX: Change SROM init to use read/write operation - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,08/13] S3C6400: Adopt SPL framwork to support spl for nand flash - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,07/13] S3C6400: Delete nand_spl for S3C6400 - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,06/13] S3C64xx: mov cpu_init.S to the board directory - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,05/13] S3C64XX: reference s5p cpu time system for s3c64xx timer - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,04/13] S3C64XX: add pwm for s3c64xx support - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,03/13] S3C64XX: Use readl/writel to operate uart - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,02/13] S3C64XX: Switch to use readl/writel to operate nand flash - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,01/13] smdk6400: Move smdk6400 board from Makefile to boards.cfg - - - - --- 2012-07-07 seedshope Superseded
[U-Boot,V3] arm: Fix to mistake clean the memory space - - - - --- 2012-07-07 seedshope aaribaud Accepted
[U-Boot] armv7: Fix to mistake clean the memory space - - - - --- 2012-07-06 seedshope aaribaud Superseded
[U-Boot] armv7: Fix infinite loop for the spl boot - - - - --- 2012-07-06 seedshope aaribaud Superseded
[U-Boot] armv7: Fix to mistake clean the memory space - - - - --- 2012-07-06 seedshope aaribaud Superseded
[U-Boot] armv7: Fix to mistake clean the memory space - - - - --- 2012-07-05 seedshope aaribaud Superseded
[U-Boot] arm/s5pxx: Fix get_timer_masked to get the time. - - - 1 --- 2012-07-02 seedshope prom Accepted
[U-Boot] armv7: Fix infinite loop for the spl boot - - - - --- 2012-07-02 seedshope Superseded
[U-Boot] smdk6400: Move smdk6400 board from Makefile to boards.cfg - - - - --- 2012-06-25 seedshope prom Superseded
[U-Boot] Fix the Double defind for setenv - - - - --- 2011-07-30 seedshope Accepted
[U-Boot] Add _end for the end of u-boot image for SMDK6400 - - - - --- 2011-05-01 seedshope prom Accepted
[U-Boot] Add _end for the end of u-boot image for SMDK6400 - - - - --- 2011-05-01 seedshope Superseded
[U-Boot,v5,6/6] SMDK6400: Fixup dram_init for relocation support - - - - --- 2011-01-22 seedshope prom Accepted
[U-Boot,v5,5/6] SMDK6400: Disable LED function in start.s on the nand booting - - - - --- 2011-01-22 seedshope prom Accepted
[U-Boot,v5,4/6] SMDK6400: Add some labels to u-boot.lds to support nand_spl - - - - --- 2011-01-22 seedshope prom Accepted
[U-Boot,v5,3/6] SMDK6400: Fix the mutiple link error - - - - --- 2011-01-22 seedshope prom Accepted
[U-Boot,v5,2/6] SMDK6400: Fix some label undefined in build error - - - - --- 2011-01-22 seedshope prom Accepted
[U-Boot,v5,1/6] SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined - - - - --- 2011-01-22 seedshope prom Accepted
[U-Boot,v4,6/6] SMDK6400: Fix SMDK6400 SDRAM init - - - - --- 2011-01-21 seedshope Rejected
[U-Boot,v4,5/6] SMDK6400: Disable LED function in start.s on the nand booting - - - - --- 2011-01-21 seedshope Accepted
[U-Boot,v4,4/6] SMDK6400: Add some labels to u-boot.lds to support nand_spl - - - - --- 2011-01-21 seedshope Rejected
[U-Boot,v4,3/6] SMDK6400: Fix the mutiple link error - - - - --- 2011-01-21 seedshope Accepted
[U-Boot,v4,2/6] SMDK6400: Fix some label undefined in build error - - - - --- 2011-01-21 seedshope Rejected
[U-Boot,v4,1/6] SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined - - - - --- 2011-01-21 seedshope Rejected
[U-Boot,v3,4/4] SMDK6400: Fix SMDK6400 SDRAM init - - - - --- 2011-01-13 seedshope Rejected
[U-Boot,v3,3/4] SMDK6400: Fix build error for nand_spl support - - - - --- 2011-01-13 seedshope Rejected
[U-Boot,v3,2/4] SMDK6400: Fix some label undefined in build error - - - - --- 2011-01-13 seedshope Rejected
[U-Boot,v3,1/4] SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined - - - - --- 2011-01-13 seedshope Rejected
[U-Boot,V2,4/4] SMDK6400: Fix SMDK6400 SDRAM init - - - - --- 2011-01-11 seedshope Rejected
[U-Boot,V2,3/4] SMDK6400: Fix build error for nand_spl support - - - - --- 2011-01-11 seedshope Rejected
[U-Boot,V2,2/4] SMDK6400: Fix some label undefined in build error - - - - --- 2011-01-11 seedshope Rejected
[U-Boot,V2,1/4] SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined - - - - --- 2011-01-11 seedshope Accepted
[U-Boot,3/3] SMDK6400: Fix build error for smdk6400 nand_spl support - - - - --- 2011-01-07 seedshope aaribaud Changes Requested
[U-Boot,2/3] SMDK6400:use common arm1176 u-boot.lds of cpu layer - - - - --- 2011-01-07 seedshope aaribaud Changes Requested
[U-Boot,1/3] SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undeclared - - - - --- 2011-01-07 seedshope aaribaud Changes Requested