| [U-Boot,2/5] am33xx: support for booting via usbeth |
2012-12-31 |
Ilya Yanok |
trini |
Superseded |
| [U-Boot,3/5] am335x_evm: enable support for booting via USB |
2012-12-31 |
Ilya Yanok |
trini |
Superseded |
| [U-Boot,4/5] spl: add possibility to force boot device |
2012-12-31 |
Ilya Yanok |
trini |
Superseded |
| [U-Boot,5/5] am335x_evm: add new config with forced USB booting |
2012-12-31 |
Ilya Yanok |
trini |
Superseded |
| [U-Boot] drivers/block/systemace: fixes read/write words for bus width = 8 |
2013-01-02 |
Alexey Brodkin |
wd |
Superseded |
| [U-Boot] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros |
2013-01-02 |
Alexey Brodkin |
wd |
Rejected |
| [U-Boot,v2] spl:falcon:trats Update Trats default board configuration file to support FALCON MODE |
2013-01-02 |
Łukasz Majewski |
prom |
Accepted |
| [U-Boot,RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem |
2013-01-02 |
Łukasz Majewski |
ag |
Superseded |
| [U-Boot] Makefile: remove MLO.byteswap on clobber |
2013-01-02 |
Nishanth Menon |
trini |
Accepted |
| [U-Boot] tools: imximage: Let .name field be more generic |
2013-01-02 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot] mx53loco: Fix PMIC name |
2013-01-02 |
Troy Kisky |
|
Not Applicable |
| [U-Boot,RFC] : always relocate u-boot before the framebuffer |
2013-01-02 |
Wolfgang Denk |
ag |
RFC |
| [U-Boot,v2] mx53loco: Add support for SEIKO 4.3'' WVGA panel |
2013-01-02 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot] arm:exynos4:pinmux: Modify the gpio function for mmc |
2013-01-03 |
Piotr Wilczek |
prom |
Accepted |
| [U-Boot,1/2] EXYNOS: EXYNOS5250: add exynos5250 register addresses |
2013-01-03 |
Donghwa Lee |
prom |
Superseded |
| [U-Boot,2/2] EXYNOS: EXYNOS5250: add gpio structure for EXYNOS5250 |
2013-01-03 |
Donghwa Lee |
prom |
Superseded |
| [U-Boot,V2] drivers/block/systemace - added missing "else" in "ace_writew" |
2013-01-03 |
Alexey Brodkin |
trini |
Accepted |
| [U-Boot,v2] VIDEO: better document the correct use of CONFIG_FB_ADDR |
2013-01-03 |
Wolfgang Denk |
ag |
Accepted |
| [U-Boot] drivers/block/systemace - fixed data type in "systemace_read" to match prototype in "block_dev_desc_t" |
2013-01-03 |
Alexey Brodkin |
trini |
Accepted |
| [U-Boot] tools: imximage: Load a size that is multiple of 512 |
2013-01-03 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,1/3,V3] EXYNOS5: FDT: Add compatible strings for PMIC |
2013-01-03 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,2/3,V3] EXYNOS5: Add device node for PMIC |
2013-01-03 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,3/3,V3] PMIC: MAX77686: Add FDT Support |
2013-01-03 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,PATH,v3,1/2] sf: Add status register reading support |
2013-01-03 |
Jagan Teki |
vapier |
New |
| [U-Boot,PATH,v3,2/2] sf: Add config register reading support |
2013-01-03 |
Jagan Teki |
vapier |
New |
| [U-Boot,v3,1/3] EHCI: Exynos: Add fdt support |
2013-01-03 |
Vivek Gautam |
marex |
Changes Requested |
| [U-Boot,v3,2/3] EXYNOS5: Add device node for USB. |
2013-01-03 |
Vivek Gautam |
marex |
Changes Requested |
| [U-Boot,v3,3/3] EXYNOS5: FDT: Add compatible strings for USB |
2013-01-03 |
Vivek Gautam |
marex |
Changes Requested |
| [U-Boot,v2] SMDK5250: Enable VBus for USB 2.0 controller |
2013-01-03 |
Vivek Gautam |
marex |
Changes Requested |
| [U-Boot,v2] tools: imximage: Load a size that is multiple of 512 |
2013-01-03 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,1/3,V4] EXYNOS5: FDT: Add compatible strings for PMIC |
2013-01-04 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,2/3,V4] EXYNOS5: Add device node for PMIC |
2013-01-04 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,3/3,V4] PMIC: MAX77686: Add FDT Support |
2013-01-04 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,V4,1/9] FDT: Add compatible string for DWMMC |
2013-01-04 |
Amar |
prom |
Superseded |
| [U-Boot,V4,2/9] EXYNOS5: FDT: Add DWMMC device node data |
2013-01-04 |
Amar |
prom |
Superseded |
| [U-Boot,V4,3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues |
2013-01-04 |
Amar |
prom |
Superseded |
| [U-Boot,V4,4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC |
2013-01-04 |
Amar |
prom |
Superseded |
| [U-Boot,V4,5/9] EXYNOS5: DWMMC: API to set mmc clock divisor |
2013-01-04 |
Amar |
prom |
Superseded |
| [U-Boot,V4,6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT |
2013-01-04 |
Amar |
prom |
Superseded |
| [U-Boot,V4,7/9] MMC: APIs to support resize of EMMC boot partition |
2013-01-04 |
Amar |
prom |
Superseded |
| [U-Boot,V4,8/9] SMDK5250: Enable EMMC booting |
2013-01-04 |
Amar |
prom |
Superseded |
| [U-Boot,V4,9/9] COMMON: MMC: Command to support EMMC booting and to |
2013-01-04 |
Amar |
prom |
Superseded |
| [U-Boot,6/7] getenv_f() env variable exist w/o needing a buffer |
2013-01-04 |
York Sun |
wd |
Rejected |
| [U-Boot,7/7] powerpc/mpc8xxx: FSL DDR debugger auto run of stored commands |
2013-01-04 |
York Sun |
afleming |
Superseded |
| [U-Boot] mx6: Add workaround for ARM errata |
2013-01-05 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,v2] mx6: Add workaround for ARM errata |
2013-01-05 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,v3] mx6: Add workaround for ARM errata |
2013-01-05 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,PULL] : Please pull u-boot-imx |
2013-01-05 |
Stefano Babic |
aaribaud |
Accepted |
| [U-Boot] common/lcd.c: cleanup use of global variables |
2013-01-05 |
Wolfgang Denk |
ag |
Accepted |
| [U-Boot] MIPS: bootm.c: use debug macro to print debug message |
2013-01-06 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot] common/cmd_bootm.c: prevent running of subcommands before 'bootm start' |
2013-01-07 |
Gabor Juhos |
trini |
Accepted |
| [U-Boot,1/2] video:cache:fix: Proper buffer alignment for lcd subsystem |
2013-01-07 |
Łukasz Majewski |
ag |
Rejected |
| [U-Boot,2/2] video:cache:fix:trats: Enable dcache flush for TRATS board's LCD subsystem |
2013-01-07 |
Łukasz Majewski |
ag |
Changes Requested |
| [U-Boot,1/2] serial/ns16550: add an option to avoid hanging on broken platforms |
2013-01-07 |
Javier Martinez Canillas |
trini |
Accepted |
| [U-Boot,2/2] OMAP3: igep00x0: add CONFIG_SYS_NS16550_BROKEN_TEMT |
2013-01-07 |
Javier Martinez Canillas |
trini |
Accepted |
| [U-Boot,1/3] MIPS: bootm.c: separate linux jump code |
2013-01-07 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,2/3] MIPS: bootm.c: separate environment initialization |
2013-01-07 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,3/3] MIPS: bootm.c: add support for 'prep' and 'go' subcommands |
2013-01-07 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,1/4,V2] EXYNOS: Add functions for power initialisation |
2013-01-07 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,2/4,V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c |
2013-01-07 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,3/4,V2] SMDK5250: Add PMIC voltage settings |
2013-01-07 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,4/4,V2] SMDK5250: Modify IRAM stack pointer address |
2013-01-07 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,v2,1/1] omap4: allow the use of a plain text env file instead boot scripts |
2013-01-07 |
Javier Martinez Canillas |
trini |
Accepted |
| [U-Boot,v4,1/3] ARM: cache: declare set_section_dcache |
2013-01-07 |
Vincent Stehlé |
trini |
Superseded |
| [U-Boot,v4,2/3] ARM: cache: introduce weak arm_setup_identity_mapping |
2013-01-07 |
Vincent Stehlé |
trini |
Superseded |
| [U-Boot,v4,3/3] ARM: OMAP5: redefine arm_setup_identity_mapping |
2013-01-07 |
Vincent Stehlé |
trini |
Superseded |
| [U-Boot,v3,1/6] mx6qsabrelite: Use tabs to environment setting |
2013-01-07 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,v3,2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type |
2013-01-07 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,v3,3/6] mx28evk: Add support to dynamically choose between ftd use or not |
2013-01-07 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,v3,4/6] mx53loco: Add support to dynamically choose between ftd use or not |
2013-01-07 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,v3,5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not |
2013-01-07 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,v3,6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between ftd use or not |
2013-01-07 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot] bootm: relocate names of sub-command table for archs with CONFIG_NEEDS_MANUAL_RELOC |
2013-01-07 |
Daniel Schwierzeck |
trini |
Accepted |
| [U-Boot] Proposal for an interface to pass a DT to the kernel on MIPS |
2013-01-07 |
Gabor Juhos |
|
Not Applicable |
| [U-Boot] Introduce a global bool type |
2013-01-07 |
York Sun |
|
Superseded |
| [U-Boot,v2] Introduce a global bool type |
2013-01-07 |
York Sun |
wd |
Changes Requested |
| [U-Boot,v3] SMDK5250: Enable VBus for USB 2.0 controller |
2013-01-08 |
Vivek Gautam |
|
Changes Requested |
| [U-Boot] Proposal for an interface to pass a DT to the kernel on MIPS |
2013-01-08 |
Gabor Juhos |
|
Not Applicable |
| [U-Boot,V3,1/4] EXYNOS5: Change parent clock of FIMD to MPLL |
2013-01-08 |
Ajay Kumar |
prom |
Changes Requested |
| [U-Boot,V3,2/4] EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM |
2013-01-08 |
Ajay Kumar |
prom |
Changes Requested |
| [U-Boot,V5,3/4] video: Modify exynos_fimd driver to support LCD console |
2013-01-08 |
Ajay Kumar |
prom |
Changes Requested |
| [U-Boot,V5,4/4] EXYNOS5: Add support for FIMD and DP |
2013-01-08 |
Ajay Kumar |
prom |
Changes Requested |
| [U-Boot,1/2] mxc nand: Add support for i.MX5 |
2013-01-08 |
Marek Vasut |
sbabic |
Superseded |
| [U-Boot,v4,1/3] EHCI: Exynos: Add fdt support |
2013-01-08 |
Vivek Gautam |
prom |
Accepted |
| [U-Boot,v4,2/3] EXYNOS5: Add device node for USB. |
2013-01-08 |
Vivek Gautam |
prom |
Accepted |
| [U-Boot,v4,3/3] EXYNOS5: FDT: Add compatible strings for USB |
2013-01-08 |
Vivek Gautam |
prom |
Accepted |
| [U-Boot,v4] SMDK5250: Enable VBus for USB 2.0 controller |
2013-01-08 |
Vivek Gautam |
prom |
Accepted |
| [U-Boot] video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards |
2013-01-08 |
Łukasz Majewski |
prom |
Changes Requested |
| [U-Boot,RFC,1/2] ARM: cache: Introduce weak dram_bank_setup function |
2013-01-08 |
SRICHARAN R |
|
RFC |
| [U-Boot,RFC,2/2] ARM: mmu: Set domain permissions to client access |
2013-01-08 |
SRICHARAN R |
|
RFC |
| [U-Boot,1/2] board/qemu-mips: fix a typo in README |
2013-01-08 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,2/2] board/qemu-mips: add '-M mips' switch to the example usage command |
2013-01-08 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,v2] video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards |
2013-01-08 |
Łukasz Majewski |
prom |
Accepted |
| [U-Boot,1/2] net: Remove call of srand from eth_random_enetaddr() |
2013-01-08 |
Christian Riesch |
wd |
Rejected |
| [U-Boot,2/2] calimain: Generate random MAC address for factory tests |
2013-01-08 |
Christian Riesch |
wd |
Rejected |
| [U-Boot] Pull request: u-boot-arm/master |
2013-01-08 |
Albert ARIBAUD |
trini |
Accepted |
| [U-Boot] mxs: Use __weak annotation to simplify code |
2013-01-08 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot] common: env_mmc: Use __weak annotation to simplify code |
2013-01-08 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,1/2] am33xx: add a pulldown macro to pinmux config |
2013-01-08 |
Lars Poeschel |
trini |
Superseded |
| [U-Boot,2/2] pcm051: Add support for Phytec phyCORE-AM335x |
2013-01-08 |
Lars Poeschel |
trini |
Superseded |
