| [U-Boot,V5,REPOST,2,1/7] ARM: bcm2835: add mailbox driver |
2013-01-30 |
Stephen Warren |
aaribaud |
Accepted |
| [U-Boot,V5,REPOST,2,2/7] ARM: rpi_b: use bcm2835 mbox driver to get memory size |
2013-01-30 |
Stephen Warren |
aaribaud |
Accepted |
| [U-Boot,V5,REPOST,2,3/7] lcd: calculate line_length after lcd_ctrl_init() |
2013-01-30 |
Stephen Warren |
aaribaud |
Accepted |
| [U-Boot,V5,REPOST,2,4/7] ARM: rpi_b: disable rpi_b dcache explicitly |
2013-01-30 |
Stephen Warren |
aaribaud |
Accepted |
| [U-Boot,V5,REPOST,2,5/7] video: add a driver for the bcm2835 |
2013-01-30 |
Stephen Warren |
aaribaud |
Accepted |
| [U-Boot,V5,REPOST,2,6/7] mmc: add bcm2835 driver |
2013-01-30 |
Stephen Warren |
aaribaud |
Accepted |
| [U-Boot,V5,REPOST,2,7/7] ARM: rpi_b: enable SD controller, add related env/cmds |
2013-01-30 |
Stephen Warren |
aaribaud |
Accepted |
| [U-Boot] mmc: support the correct card version for eMMC |
2013-01-30 |
Jaehoon Chung |
afleming |
Accepted |
| [U-Boot] mmc: check the revision for sd3.0 |
2013-01-30 |
Jaehoon Chung |
afleming |
Accepted |
| [U-Boot,01/10] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,02/10] mx23: Document the tRAS lockout setting in memory initialization |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,04/10] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,05/10] mxs: Fix iomux.h to not break build during assembly stage |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,06/10] mx23_olinuxino: Add support for status LED |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,07/10] usb: mxs: Disable USB Port 1 for i.MX23 |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,08/10] mx23evk: Enable USB support |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,09/10] mx23_olinuxino: Enable USB support |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,10/10] mx23_olinuxino: Add ethernet support |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot] MIPS: remove OUTPUT_FORMAT from linker scripts |
2013-01-30 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot] PHY: micrel.c: add support for KSZ9031 |
2013-01-30 |
David Andrey |
jhersh |
Superseded |
| [U-Boot,v2,1/7] MIPS: add unified u-boot.lds file |
2013-01-30 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,v2,2/7] MIPS: qemu-mips: use the unified u-boot.lds script |
2013-01-30 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,v2,3/7] MIPS: pb1x00: remove custom u-boot.lds script |
2013-01-30 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,v2,4/7] MIPS: vct: remove custom u-boot.lds script |
2013-01-30 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,v2,5/7] MIPS: incaip: remove custom u-boot.lds script |
2013-01-30 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,v2,6/7] MIPS: dbau1x00: remove custom u-boot.lds script |
2013-01-30 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,v2,7/7] MIPS: qi_lb60: remove custom u-boot.lds script |
2013-01-30 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot] MIPS: xburst: simplify relocation offset calculation |
2013-01-30 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,v2] MIPS: simplify relocated _G_O_T_ address calculation |
2013-01-30 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot,RFC] Add support for Boundary Devices Nitrogen6x boards |
2013-01-30 |
Eric Nelson |
|
RFC |
| [U-Boot,1/6] imx: mx6q DDR3 init: Fix tMRD |
2013-01-30 |
Benoît Thébaudeau |
sbabic |
Awaiting Upstream |
| [U-Boot,2/6] imx: mx6q DDR3 init: Fix tXPR |
2013-01-30 |
Benoît Thébaudeau |
sbabic |
Awaiting Upstream |
| [U-Boot,3/6] imx: mx6q DDR3 init: Fix SDE_to_RST |
2013-01-30 |
Benoît Thébaudeau |
sbabic |
Awaiting Upstream |
| [U-Boot,4/6] imx: mx6q DDR3 init: Fix RST_to_CKE |
2013-01-30 |
Benoît Thébaudeau |
sbabic |
Awaiting Upstream |
| [U-Boot,5/6] imx: mx6q DDR3 init: Fix MR0.PPD |
2013-01-30 |
Benoît Thébaudeau |
sbabic |
Awaiting Upstream |
| [U-Boot,6/6] imx: mx6q DDR3 init: Benefit from available CL = 7 |
2013-01-30 |
Benoît Thébaudeau |
sbabic |
Awaiting Upstream |
| [U-Boot,v7] Consolidate bool type |
2013-01-30 |
York Sun |
trini |
Superseded |
| [U-Boot] env: Allow accessing non-mtd devices |
2013-01-30 |
Lubomir Rintel |
wd |
Changes Requested |
| [U-Boot,GIT,PULL] u-boot-mips/master |
2013-01-31 |
Daniel Schwierzeck |
trini |
Accepted |
| [U-Boot] MIPS: start.S: remove obsolete 64 bit handling in setup_c0_status |
2013-01-31 |
Daniel Schwierzeck |
danielschwierzeck |
Accepted |
| [U-Boot] MIPS: start.S: unify and simplify reset vector handling |
2013-01-31 |
Daniel Schwierzeck |
danielschwierzeck |
Superseded |
| [U-Boot,1/7] ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register |
2013-01-31 |
SRICHARAN R |
trini |
Superseded |
| [U-Boot,2/7] ARM: OMAP4+: Change the PRCM structure prototype common for all Socs |
2013-01-31 |
SRICHARAN R |
trini |
Changes Requested |
| [U-Boot,3/7] ARM: OMAP4+: Cleanup the clocks layer |
2013-01-31 |
SRICHARAN R |
trini |
Superseded |
| [U-Boot,4/7] ARM: OMAP4+: Clean up the pmic code |
2013-01-31 |
SRICHARAN R |
trini |
Changes Requested |
| [U-Boot,5/7] ARM: OMAP4+: Cleanup emif specific files |
2013-01-31 |
SRICHARAN R |
trini |
Superseded |
| [U-Boot,6/7] ARM: OMAP4+: Make control module register structure generic |
2013-01-31 |
SRICHARAN R |
trini |
Superseded |
| [U-Boot,7/7] ARM: OMAP5: Clean up iosettings code |
2013-01-31 |
SRICHARAN R |
trini |
Superseded |
| [U-Boot,1/5] ARM: OMAP5: Add silicon id support for ES2.0 revision. |
2013-01-31 |
SRICHARAN R |
trini |
Superseded |
| [U-Boot,2/5] ARM: OMAP5: clock: Add the prcm register changes required for ES2.0 |
2013-01-31 |
SRICHARAN R |
trini |
Superseded |
| [U-Boot,3/5] ARM: OMAP5: clocks: Add OPP settings required for OMAP543X ES2.0 soc |
2013-01-31 |
SRICHARAN R |
trini |
Superseded |
| [U-Boot,4/5] ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs |
2013-01-31 |
SRICHARAN R |
trini |
Superseded |
| [U-Boot,5/5] ARM: OMAP5: srcomp: enable slew rate compensation cells after powerup |
2013-01-31 |
SRICHARAN R |
trini |
Superseded |
| [U-Boot,V3,1/7] omap3: add useful dss defines |
2013-01-31 |
Nikita Kiryanov |
trini |
Accepted |
| [U-Boot,V3,2/7] omap3: allow dynamic selection of gfx_format |
2013-01-31 |
Nikita Kiryanov |
trini |
Accepted |
| [U-Boot,V2,3/7] lcd: prevent unaligned memory access when displaying splash screen |
2013-01-31 |
Nikita Kiryanov |
ag |
Rejected |
| [U-Boot,V1,4/7] lcd: add option for board specific splash screen preparation |
2013-01-31 |
Nikita Kiryanov |
trini |
Accepted |
| [U-Boot,V3,5/7] cm-t35: add support for dvi displays |
2013-01-31 |
Nikita Kiryanov |
trini |
Accepted |
| [U-Boot,V2,6/7] cm-t35: add support for user defined lcd parameters |
2013-01-31 |
Nikita Kiryanov |
trini |
Accepted |
| [U-Boot,V2,7/7] cm-t35: add support for loading splash image from NAND |
2013-01-31 |
Nikita Kiryanov |
ag |
Rejected |
| [U-Boot] fw_env.config: Correct "fw_saveenv" to "fw_setenv". |
2013-01-31 |
Robert P. J. Day |
trini |
Accepted |
| [U-Boot] arm: fix bug on relocation address |
2013-01-31 |
Luca Ellero |
aaribaud |
Deferred |
| [U-Boot] nand/mxc: set host->page_addr for NAND_CMD_READOOB |
2013-01-31 |
Scott Wood |
scottwood |
Superseded |
| [U-Boot,1/7,V3] EXYNOS5: Add function to enable XXTI clock source |
2013-02-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,2/7,V3] Sound: MAX98095: Add the driver for codec |
2013-02-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,3/7,V3] Sound: Support for MAX98095 codec in driver |
2013-02-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,4/7,V3] EXYNOS5: GPIO to enable MAX98095 |
2013-02-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,5/7,V3] EXYNOS5: FDT: Add compatible strings for MAX98095 |
2013-02-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,6/7,V3] EXYNOS5: Add initial DTS file for Snow. |
2013-02-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,7/7,V3] EXYNOS5: Snow: Add a configuration file |
2013-02-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,0/1] Davinci: Make MAC address offset in EEPROM configurable |
2013-02-01 |
Kim Bøndergaard |
trini |
Not Applicable |
| [U-Boot,1/1] Davinci: Make MAC address offset in EEPROM configurable CONFIG_SYS_I2C_EEPROM_MAC_OFFSET |
2013-02-01 |
Kim Bøndergaard |
trini |
Changes Requested |
| [U-Boot,v3,1/4] menu: Added support to use user defined functions |
2013-02-01 |
Pali Rohár |
ag |
Superseded |
| [U-Boot,v3,2/4] New command bootmenu: ANSI terminal Boot Menu support |
2013-02-01 |
Pali Rohár |
ag |
Superseded |
| [U-Boot,v3,3/4] New command clear: Clear the ANSI terminal |
2013-02-01 |
Pali Rohár |
ag |
Superseded |
| [U-Boot,v3,4/4] RX-51: Add support for bootmenu |
2013-02-01 |
Pali Rohár |
trini |
Superseded |
| [U-Boot,1/2] da8xx: ea20: Add the configuration define for the exact SoC variant |
2013-02-01 |
Tomas Novotny |
trini |
Accepted |
| [U-Boot,2/2] da8xx: Add the missing pinmux for da830 to the gpio driver |
2013-02-01 |
Tomas Novotny |
trini |
Accepted |
| [U-Boot] i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST |
2013-02-01 |
Eric Nelson |
sbabic |
Awaiting Upstream |
| [U-Boot,v2] MIPS: start.S: unify and simplify reset vector handling |
2013-02-01 |
Daniel Schwierzeck |
danielschwierzeck |
Accepted |
| [U-Boot,RFC] ppc: make the PPC405 jump to _start during RAM/XMD boot |
2013-02-01 |
Mela Custodio |
|
RFC |
| [U-Boot] mxs: mmc: spi: dma: Better wrap the MXS differences |
2013-02-02 |
Marek Vasut |
sbabic |
Superseded |
| [U-Boot,1/2] mxs: spi: Fix the MXS SPI for mx23 |
2013-02-02 |
Marek Vasut |
sbabic |
Superseded |
| [U-Boot,2/2] mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE |
2013-02-02 |
Marek Vasut |
sbabic |
Superseded |
| [U-Boot] some dead code and redundant files for nios? |
2013-02-02 |
Robert P. J. Day |
macpaul |
Not Applicable |
| [U-Boot] MIPS: compute num_got_entries from .got section's size |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Accepted |
| [U-Boot] arm: Clean up/standardize contents of ARM's u-boot.h |
2013-02-02 |
Robert P. J. Day |
aaribaud |
Deferred |
| [U-Boot] U-Boot Bug with newer GCC |
2013-02-02 |
Jeroen Hofstee |
|
Not Applicable |
| [U-Boot] cmd_mem.c: Fix simple typoes, no functional changes. |
2013-02-02 |
Robert P. J. Day |
trini |
Superseded |
| [U-Boot,v2,01/10] MIPS: qemu-malta: add support for emulated MIPS Malta board |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,v2,02/10] MIPS: qemu-malta: add reset support |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,v2,03/10] MIPS: qemu-malta: enable flash support |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,v2,04/10] MIPS: import gt64120.h header from Linux 3.8-rc3 |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,v2,05/10] MIPS: qemu-malta: setup GT64120 registers as done by YAMON |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,v2,06/10] MIPS: qemu-malta: add PCI support |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,v2,07/10] net: pcnet: use pci_virt_to_mem to obtain buffer addresses |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,v2,08/10] MIPS: qemu-malta: bring up ethernet |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,v2,09/10] MIPS: bootm.c: add YAMON style Linux preparation/jump code |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,v2,10/10] MIPS: start.S: emulate REVISION register for qemu-malta |
2013-02-02 |
Gabor Juhos |
danielschwierzeck |
Superseded |