Show patches with: Archived = No       |   167530 patches
« 1 2 ... 574 575 576 … 1675 1676 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,5/8,V2] I2C: S3C24X0: Add offset to calculate next i2c channel base address 1 - - - --- 2012-06-07 Rajeshwari Birje hs Superseded
[U-Boot,6/8,V2] I2C: Modify the I2C driver for EXYNOS5 2 - - - --- 2012-06-07 Rajeshwari Birje hs Superseded
[U-Boot,7/8,V2] I2C: Add support for Multi channel 1 - - - --- 2012-06-07 Rajeshwari Birje hs Superseded
[U-Boot,8/8,V2] CONFIG: SMDK5250: I2C: Enable I2C 1 - - - --- 2012-06-07 Rajeshwari Birje hs Superseded
[U-Boot,V2] MMC: DWMMC: Add DWMMC driver - - - - --- 2012-06-11 Rajeshwari Birje afleming Changes Requested
[U-Boot,1/8,V3] EXYNOS: CLK: Add i2c clock 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,2/8,V3] EXYNOS: Add I2C base address. 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,3/8,V3] EXYNOS: PINMUX: Add pinmux support for I2C 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,4/8,V3] I2C: Move struct s3c24x0_i2c to a common place. 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,5/8,V3] I2C: S3C24X0: Add offset to calculate next i2c channel base address 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,6/8,V3] I2C: Modify the I2C driver for EXYNOS5 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,7/8,V3] I2C: Add support for Multi channel 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,8/8,V3] CONFIG: SMDK5250: I2C: Enable I2C 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,1/8,V4] EXYNOS: CLK: Add i2c clock 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,2/8,V4] EXYNOS: Add I2C base address. 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,3/8,V4] EXYNOS: PINMUX: Add pinmux support for I2C 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,4/8,V4] I2C: Move struct s3c24x0_i2c to a common place. 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,5/8,V4] I2C: S3C24X0: Add offset to calculate next i2c channel base address 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,6/8,V4] I2C: Modify the I2C driver for EXYNOS5 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,7/8,V4] I2C: Add support for Multi channel 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,8/8,V4] CONFIG: SMDK5250: I2C: Enable I2C 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,1/9] ARCH: SPL: Add parametric board initializer - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,2/9] SMDK5250: SPL: Define parametric board initializer - - - - --- 2012-06-20 Rajeshwari Birje Accepted
[U-Boot,3/9] SMDK5250: Add smdk5250-uboot-spl.lds - - - - --- 2012-06-20 Rajeshwari Birje Accepted
[U-Boot,4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,5/9] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,6/9] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,7/9] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,8/9] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,9/9] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Accepted
[U-Boot,1/9,V2] ARCH: SPL: Add parametric board initializer - - - - --- 2012-06-20 Rajeshwari Birje prom Accepted
[U-Boot,2/9,V2] SMDK5250: SPL: Define parametric board initializer - - - - --- 2012-06-20 Rajeshwari Birje prom Changes Requested
[U-Boot,3/9,V2] SMDK5250: Add smdk5250-uboot-spl.lds - - - - --- 2012-06-20 Rajeshwari Birje prom Changes Requested
[U-Boot,4/9,V2] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,5/9,V2] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,6/9,V2] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,7/9,V2] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,8/9,V2] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,9/9,V2] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,01/10,V3] ARCH: SPL: Add parametric board initializer - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,02/10,V3] SMDK5250: SPL: Define parametric board initializer - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,03/10,V3] SMDK5250: Add smdk5250-uboot-spl.lds - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,04/10,V3] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 - - - - --- 2012-06-29 Rajeshwari Birje prom Accepted
[U-Boot,05/10,V3] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,06/10,V3] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,07/10,V3] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 - - - - --- 2012-06-29 Rajeshwari Birje prom Accepted
[U-Boot,08/10,V3] EXYNOS5: CLOCK: Add BPLL support - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,09/10,V3] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 - - - - --- 2012-06-29 Rajeshwari Birje prom Accepted
[U-Boot,10/10,V3] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,01/10,V4] ARCH: SPL: Add parametric board initializer - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,02/10,V4] SMDK5250: SPL: Define parametric board initializer - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,03/10,V4] SMDK5250: Add smdk5250-uboot-spl.lds - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,04/10,V4] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 1 - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,05/10,V4] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,06/10,V4] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,07/10,V4] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 1 - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,08/10,V4] EXYNOS5: CLOCK: Add BPLL support 1 - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,09/10,V4] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 1 - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,10/10,V4] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 - - - - --- 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,01/10,V5] ARCH: SPL: Add parametric board initializer - - - - --- 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,02/10,V5] SMDK5250: SPL: Define parametric board initializer - - - - --- 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,03/10,V5] SMDK5250: Add smdk5250-uboot-spl.lds - - - - --- 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,04/10,V5] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 1 - - - --- 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,05/10,V5] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 - - - - --- 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,06/10,V5] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 - - - - --- 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,07/10,V5] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 1 - - - --- 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,08/10,V5] EXYNOS5: CLOCK: Add BPLL support 1 - - - --- 2012-07-02 Rajeshwari Birje prom Accepted
[U-Boot,09/10,V5] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 1 - - - --- 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,10/10,V5] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 - - - - --- 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,01/10,V6] ARCH: SPL: Add parametric board initializer - - - - --- 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,02/10,V6] SMDK5250: SPL: Define parametric board initializer - - - - --- 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,03/10,V6] SMDK5250: Add smdk5250-uboot-spl.lds - - - - --- 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,04/10,V6] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 1 - - - --- 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,05/10,V6] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 - - - - --- 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,06/10,V6] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 - - - - --- 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,07/10,V6] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 1 - - - --- 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,08/10,V6] EXYNOS5: CLOCK: Add BPLL support 1 - - - --- 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,09/10,V6] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 1 - - - --- 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,10/10,V6] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 - - - - --- 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,1/7,V5] EXYNOS: CLK: Add i2c clock 1 - - - --- 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,2/7,V5] EXYNOS: Add I2C base address. 1 - - - --- 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,3/7,V5] EXYNOS: PINMUX: Add pinmux support for I2C 1 - - - --- 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,4/7,V5] I2C: Move struct s3c24x0_i2c to a common place. 1 - - - --- 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,5/7,V5] I2C: Modify the I2C driver for EXYNOS5 1 - - - --- 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,6/7,V5] I2C: Add support for Multi channel 1 - - - --- 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,7/7,V5] CONFIG: SMDK5250: I2C: Enable I2C 1 - - - --- 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot] EXYNOS: Fix USB compiler warning 1 - - - --- 2012-07-10 Rajeshwari Birje Accepted
[U-Boot,1/8,V6] EXYNOS: CLK: Add i2c clock 2 - - - --- 2012-07-19 Rajeshwari Birje hs Accepted
[U-Boot,2/8,V6] EXYNOS: Add I2C base address. 1 - - - --- 2012-07-19 Rajeshwari Birje hs Accepted
[U-Boot,3/8,V6] EXYNOS5: define EXYNOS5_I2C_SPACING 1 - - - --- 2012-07-19 Rajeshwari Birje hs Accepted
[U-Boot,4/8,V6] EXYNOS: PINMUX: Add pinmux support for I2C 1 - - - --- 2012-07-19 Rajeshwari Birje hs Superseded
[U-Boot,5/8,V6] I2C: Move struct s3c24x0_i2c to a common place. 1 - - - --- 2012-07-19 Rajeshwari Birje hs Superseded
[U-Boot,6/8,V6] I2C: Modify the I2C driver for EXYNOS5 2 - - - --- 2012-07-19 Rajeshwari Birje hs Superseded
[U-Boot,7/8,V6] I2C: Add support for Multi channel 1 - - - --- 2012-07-19 Rajeshwari Birje hs Superseded
[U-Boot,8/8,V6] CONFIG: SMDK5250: I2C: Enable I2C 2 - - - --- 2012-07-19 Rajeshwari Birje hs Superseded
[U-Boot,1/8,V7] EXYNOS: CLK: Add i2c clock 1 - - - --- 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,2/8,V7] EXYNOS: Add I2C base address. 1 - - - --- 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,3/8,V7] EXYNOS5: define EXYNOS5_I2C_SPACING 1 - - - --- 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,4/8,V7] EXYNOS: PINMUX: Add pinmux support for I2C 1 - - - --- 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,5/8,V7] I2C: Move struct s3c24x0_i2c to a common place. 1 - - - --- 2012-07-24 Rajeshwari Birje hs Accepted
« 1 2 ... 574 575 576 … 1675 1676 »