Show patches with: none      |   179653 patches
« 1 2 ... 1665 1666 1667 … 1796 1797 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,5/9,V2] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,4/9,V2] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,3/9,V2] SMDK5250: Add smdk5250-uboot-spl.lds - - - - --- 2012-06-20 Rajeshwari Birje prom Changes Requested
[U-Boot,2/9,V2] SMDK5250: SPL: Define parametric board initializer - - - - --- 2012-06-20 Rajeshwari Birje prom Changes Requested
[U-Boot,1/9,V2] ARCH: SPL: Add parametric board initializer - - - - --- 2012-06-20 Rajeshwari Birje prom Accepted
[U-Boot,9/9] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Accepted
[U-Boot,8/9] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,7/9] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,6/9] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,5/9] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,3/9] SMDK5250: Add smdk5250-uboot-spl.lds - - - - --- 2012-06-20 Rajeshwari Birje Accepted
[U-Boot,2/9] SMDK5250: SPL: Define parametric board initializer - - - - --- 2012-06-20 Rajeshwari Birje Accepted
[U-Boot,1/9] ARCH: SPL: Add parametric board initializer - - - - --- 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,v3,1/1] tegra: usb: Fix device enumeration problem of USB1 1 - - - --- 2012-06-20 Jim Lin Superseded
[U-Boot] EXYNOS5: GPIO: fix wrong gpio bank offset - - - - --- 2012-06-20 Jaehoon Chung prom Not Applicable
[U-Boot] EXYNOS: PINMUX: modify the gpio function value for mmc - - - - --- 2012-06-20 Jaehoon Chung prom Changes Requested
[U-Boot,v4,2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 1 - - - --- 2012-06-19 Tom Rini wd Accepted
[U-Boot,v4,1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there - - - - --- 2012-06-19 Tom Rini wd Accepted
[U-Boot] mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register 1 - - - --- 2012-06-19 Fabio Estevam Accepted
[U-Boot,10/11,v2] armv7: Adding cpu specific cache managmenent - - - - --- 2012-06-19 Mathieu Poirier trini Superseded
[U-Boot,06/11,v2] snowball: applying power to LAN and GBF controllers - - - - --- 2012-06-19 Mathieu Poirier trini Accepted
[U-Boot,03/11,v2] snowball: Adding architecture dependent initialisation - - - - --- 2012-06-19 Mathieu Poirier trini Superseded
[U-Boot,01/11,v2] snowball: Add support for ux500 based snowball board - - - - --- 2012-06-19 Mathieu Poirier trini Superseded
[U-Boot,v2,1/1] tegra: usb: Fix device enumeration problem of USB1 - - - - --- 2012-06-19 Jim Lin Superseded
[U-Boot,8/8,V4] CONFIG: SMDK5250: I2C: Enable I2C 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,7/8,V4] I2C: Add support for Multi channel 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,6/8,V4] I2C: Modify the I2C driver for EXYNOS5 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,5/8,V4] I2C: S3C24X0: Add offset to calculate next i2c channel base address 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,4/8,V4] I2C: Move struct s3c24x0_i2c to a common place. 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,3/8,V4] EXYNOS: PINMUX: Add pinmux support for I2C 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,2/8,V4] EXYNOS: Add I2C base address. 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,1/8,V4] EXYNOS: CLK: Add i2c clock 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,8/8,V3] CONFIG: SMDK5250: I2C: Enable I2C 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,7/8,V3] I2C: Add support for Multi channel 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,6/8,V3] I2C: Modify the I2C driver for EXYNOS5 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,5/8,V3] I2C: S3C24X0: Add offset to calculate next i2c channel base address 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,4/8,V3] I2C: Move struct s3c24x0_i2c to a common place. 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,3/8,V3] EXYNOS: PINMUX: Add pinmux support for I2C 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,2/8,V3] EXYNOS: Add I2C base address. 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,1/8,V3] EXYNOS: CLK: Add i2c clock 1 - - - --- 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot] powerpc/mpc83xx: fix copyright string in serdes.c - - - - --- 2012-06-19 Timur Tabi kimphill Accepted
[U-Boot] usb_storage: fix ehci driver max transfer size - - - - --- 2012-06-18 Stefan Herbrechtsmeier marex Superseded
[U-Boot] mx53loco: Fix build error when CONFIG_VIDEO is disabled - - - - --- 2012-06-18 Vikram Narayanan ag Superseded
[U-Boot] mx51evk: Fix build error when CONFIG_VIDEO is disabled - - - - --- 2012-06-18 Vikram Narayanan ag Superseded
[U-Boot,11/11] snowball: Adding board specific cache cleanup routine - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,10/11] armv7: Adding cpu specific cache managmenent - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,09/11] u8500: Separating mmc config parameters from driver - - - - --- 2012-06-18 Mathieu Poirier Superseded
[U-Boot,08/11] u8500: Enabling power to MMC device on AB8500 V2 - - - - --- 2012-06-18 Mathieu Poirier Superseded
[U-Boot,07/11] u8500: Moving processor-specific functions to cpu area. - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,06/11] snowball: applying power to LAN and GBF controllers - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,04/11] snowball: Adding CPU clock initialisation - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,03/11] snowball: Adding architecture dependent initialisation - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,02/11] u8500: Moving prcmu to cpu directory - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,01/11] snowball: Add support for ux500 based snowball board - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,11/11] snowball: Adding board specific cache cleanup routine - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,10/11] armv7: Adding cpu specific cache managmenent - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,09/11] u8500: Separating mmc config parameters from driver - - - - --- 2012-06-18 Mathieu Poirier Superseded
[U-Boot,08/11] u8500: Enabling power to MMC device on AB8500 V2 - - - - --- 2012-06-18 Mathieu Poirier Superseded
[U-Boot,07/11] u8500: Moving processor-specific functions to cpu area. - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,06/11] snowball: applying power to LAN and GBF controllers - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,04/11] snowball: Adding CPU clock initialisation - - - - --- 2012-06-18 Mathieu Poirier trini Accepted
[U-Boot,03/11] snowball: Adding architecture dependent initialisation - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,02/11] u8500: Moving prcmu to cpu directory - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,01/11] snowball: Add support for ux500 based snowball board - - - - --- 2012-06-18 Mathieu Poirier trini Superseded
[U-Boot,v3] doc: README.mx28_common: Add missing entry into Contents 1 - - - --- 2012-06-18 Fabio Estevam Accepted
[U-Boot,v2] doc: README.mx28_common: Add missing entry into Contents - - - - --- 2012-06-18 Fabio Estevam Changes Requested
[U-Boot] doc: README.mx28_common: Add missing entry into Contents - - - - --- 2012-06-18 Fabio Estevam sbabic Changes Requested
[U-Boot] please pull u-boot-samsung/master - - - - --- 2012-06-18 Minkyu Kang Accepted
[U-Boot,3/3] mx28evk: extend default environment - - - - --- 2012-06-17 Otavio Salvador Superseded
[U-Boot,2/3] mxs: generalize code for print_cpuinfo() - - - - --- 2012-06-17 Otavio Salvador Superseded
[U-Boot,1/3] imx: Use a clear identification of an unidentified CPU type - - - - --- 2012-06-17 Otavio Salvador Changes Requested
[U-Boot,v4] tx25: Use generic gpio_* calls 3 - - - --- 2012-06-16 Vikram Narayanan ag Accepted
[U-Boot,GIT,PULL] u-boot-mpc83xx: keymile boards updates - - - - --- 2012-06-15 Kim Phillips wd Accepted
[U-Boot,v3] tx25: Use generic gpio_* calls 1 - - - --- 2012-06-15 Vikram Narayanan Superseded
[U-Boot] mx6: Make pad name macro consistent with the datasheet 1 - - - --- 2012-06-15 Ashok Accepted
[U-Boot] am35xx, twister: could not write nand flash - - - - --- 2012-06-15 Heiko Schocher Not Applicable
[U-Boot,v2,3/3] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment - - - - --- 2012-06-14 Tom Rini marex Superseded
[U-Boot,v2,2/3] cache_v7: Check for dcache enablement in dcache flush functions - - - - --- 2012-06-14 Tom Rini marex Changes Requested
[U-Boot,v2,1/3] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init - - - - --- 2012-06-14 Tom Rini marex Superseded
[U-Boot,4/4] musb_core.h: Add a new USB_DMA_MINALIGN define for cache alignment - - - - --- 2012-06-14 Tom Rini Superseded
[U-Boot,3/4] ehci-hcd.c: Add a new USB_DMA_MINALIGN define for cache alignment - - - - --- 2012-06-14 Tom Rini Superseded
[U-Boot,2/4] cache_v7: Check for dcache enablement in dcache flush functions - - - - --- 2012-06-14 Tom Rini Superseded
[U-Boot,1/4] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init 1 - - - --- 2012-06-14 Tom Rini Accepted
[U-Boot] i.MX6 USDHC: Use the ESDHC clock 1 - - - --- 2012-06-14 Behme Dirk (CM/ESO2) sbabic Accepted
[U-Boot,1/1] tegra: usb: Fix device enumeration problem of USB1 - - - - --- 2012-06-14 Jim Lin Superseded
[U-Boot,4/4] OMAP3: mcx: read hot-water-button after reset - - - - --- 2012-06-14 Stefano Babic trini Accepted
[U-Boot,3/4] OMAP3: mcx: updated default environment - - - - --- 2012-06-14 Stefano Babic trini Accepted
[U-Boot,2/4] OMAP3: mcx: set pinmux for uart4 - - - - --- 2012-06-14 Stefano Babic trini Accepted
[U-Boot,1/4] mcx: increased buffer for command line - - - - --- 2012-06-14 Stefano Babic trini Accepted
[U-Boot,4/4] OMAP3: mt_ventoux: add video/ splashscreen support - - - - --- 2012-06-14 Stefano Babic ag Changes Requested
[U-Boot,3/4] OMAP3: twister: add video support - - - - --- 2012-06-14 Stefano Babic ag Changes Requested
[U-Boot,2/4] OMAP3: added clock definitions for OMAP3 DSS driver - - - - --- 2012-06-14 Stefano Babic ag Changes Requested
[U-Boot,1/4] video: omap3_dss: add setup for LCD - - - - --- 2012-06-14 Stefano Babic ag Changes Requested
[U-Boot] arm: omap3: cm-t35: minor comment and printf change - - - - --- 2012-06-14 Igor Grinberg trini Accepted
[U-Boot,1/1] tegra: seaboard: Initialize multiple USB controllers at once - - - - --- 2012-06-14 Jim Lin tomcwarren Superseded
[U-Boot,RFC,v2,1/3] imx-common/cmd_resetmode.c: add imx resetmode command - - - - --- 2012-06-14 Troy Kisky RFC
[U-Boot,RFC,v2,3/3] mx53evk: add resetmode support - - - - --- 2012-06-13 Troy Kisky RFC
« 1 2 ... 1665 1666 1667 … 1796 1797 »