Show patches with: none      |   179409 patches
« 1 2 ... 676 677 678 … 1794 1795 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,V2,5/8] led: bcm6858: allow to use this driver on ARCH_963158 [U-Boot,V2,1/8] led: add initial support for bcm6858 - - - - --- 2019-03-22 Philippe REYNES trini Accepted
[U-Boot,V2,6/8] dt: bcm63158: add led controller [U-Boot,V2,1/8] led: add initial support for bcm6858 - - - - --- 2019-03-22 Philippe REYNES trini Accepted
[U-Boot,V2,7/8] dt: bcm963158: enable led controller [U-Boot,V2,1/8] led: add initial support for bcm6858 - - - - --- 2019-03-22 Philippe REYNES trini Accepted
[U-Boot,V2,8/8] bcm963158: enable led support [U-Boot,V2,1/8] led: add initial support for bcm6858 - - - - --- 2019-03-22 Philippe REYNES trini Accepted
[U-Boot,1/3] watchdog: bcm6345: callback start use tick instead of ms fix bcm6345 watchdog on broadcom board - - 1 - --- 2019-05-03 Philippe REYNES trini Accepted
[U-Boot,2/3] dt: bcm6858: watchdog should use a 50Mhz clock fix bcm6345 watchdog on broadcom board - - 1 - --- 2019-05-03 Philippe REYNES trini Accepted
[U-Boot,3/3] dt: bcm63158: watchdog should use a 50Mhz clock fix bcm6345 watchdog on broadcom board - - 1 - --- 2019-05-03 Philippe REYNES trini Accepted
[U-Boot,1/3] bcm968580xref: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT [U-Boot,1/3] bcm968580xref: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT - - - - --- 2019-05-03 Philippe REYNES trini Accepted
[U-Boot,2/3] bcm963158: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT [U-Boot,1/3] bcm968580xref: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT - - - - --- 2019-05-03 Philippe REYNES trini Accepted
[U-Boot,3/3] bcm968380gerg: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT [U-Boot,1/3] bcm968580xref: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT - - - - --- 2019-05-03 Philippe REYNES trini Accepted
[U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. [U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,02/10] spi: bcm63xx_hsspi: switch to raw I/O functions. [U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,03/10] waitbit: Add the generic wait_for_bit macros for 16 and 32 bits. [U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,04/10] spi: bcm63xx_hsspi: Continue init when using no reset and fixed-clock. [U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,05/10] dt: bcm63158: Add hsspi controller [U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,06/10] dt: bcm963158: add a spi-nor device [U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,07/10] configs: Add hsspi/spi support to bcm963158. [U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,08/10] dt: bcm6858: add hsspi controller [U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,09/10] dt: bcm968580xref: add a spi-nor device [U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,10/10] bcm968580xref: enable spi-nor support [U-Boot,01/10] spi: Remove MIPS dependency from Broadcom HSSPI driver. - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 [U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 2 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V2,02/10] waitbit: Add the generic wait_for_bit macros for 16 and 32 bits. [U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V2,03/10] spi: bcm63xx_hsspi: switch to raw I/O functions. [U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V2,04/10] spi: bcm63xx_hsspi: Continue init when using no reset and fixed-clock. [U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V2,05/10] dt: bcm63158: Add hsspi controller [U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V2,06/10] dt: bcm963158: add a spi-nor device [U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V2,07/10] configs: Add hsspi/spi support to bcm963158. [U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V2,08/10] dt: bcm6858: add hsspi controller [U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V2,09/10] dt: bcm968580xref: add a spi-nor device [U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V2,10/10] bcm968580xref: enable spi-nor support [U-Boot,V2,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-13 Philippe REYNES trini Superseded
[U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 [U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 2 - --- 2019-08-14 Philippe REYNES trini Accepted
[U-Boot,V3,02/10] waitbit: Add the generic wait_for_bit macros for 16 and 32 bits. [U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 2 - --- 2019-08-14 Philippe REYNES trini Accepted
[U-Boot,V3,03/10] spi: bcm63xx_hsspi: switch to raw I/O functions. [U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 2 - --- 2019-08-14 Philippe REYNES trini Accepted
[U-Boot,V3,04/10] spi: bcm63xx_hsspi: Continue init when using no reset and fixed-clock. [U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-14 Philippe REYNES trini Accepted
[U-Boot,V3,05/10] dt: bcm63158: Add hsspi controller [U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-14 Philippe REYNES trini Accepted
[U-Boot,V3,06/10] dt: bcm963158: add a spi-nor device [U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-14 Philippe REYNES trini Accepted
[U-Boot,V3,07/10] configs: Add hsspi/spi support to bcm963158. [U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-14 Philippe REYNES trini Accepted
[U-Boot,V3,08/10] dt: bcm6858: add hsspi controller [U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-14 Philippe REYNES trini Accepted
[U-Boot,V3,09/10] dt: bcm968580xref: add a spi-nor device [U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-14 Philippe REYNES trini Accepted
[U-Boot,V3,10/10] bcm968580xref: enable spi-nor support [U-Boot,V3,01/10] spi: hsspi: allow to be used on bcm6858 and bcm63158 - - 1 - --- 2019-08-14 Philippe REYNES trini Accepted
[U-Boot] spl: add a generic function board_init_r [U-Boot] spl: add a generic function board_init_r - - - - --- 2019-09-05 Philippe REYNES trini Superseded
[U-Boot,RFC] bootcount: add support to customize bootcount variable name [U-Boot,RFC] bootcount: add support to customize bootcount variable name - - - - --- 2019-09-09 Philippe REYNES trini RFC
[U-Boot,1/2] pytest: vboot: add a test for required key rsa signature: check that required key is really mandatory - - 2 - --- 2019-09-18 Philippe REYNES sjg Accepted
[U-Boot,2/2] rsa: Return immediately if required-key verification fails rsa signature: check that required key is really mandatory - - 2 - --- 2019-09-18 Philippe REYNES sjg Accepted
[U-Boot,1/4] sandbox: enable command aes pytest: add a simple test to check the command aes - - 1 - --- 2019-09-19 Philippe REYNES sjg Superseded
[U-Boot,2/4] sandbox64: enable command aes pytest: add a simple test to check the command aes - - - - --- 2019-09-19 Philippe REYNES sjg Superseded
[U-Boot,3/4] cmd: aes: use map_sysmem when accessing memory pytest: add a simple test to check the command aes - - - - --- 2019-09-19 Philippe REYNES sjg Superseded
[U-Boot,4/4] pytest: add a new test for aes pytest: add a simple test to check the command aes - - - - --- 2019-09-19 Philippe REYNES sjg Superseded
[U-Boot,V2] spl: add a generic function board_init_f [U-Boot,V2] spl: add a generic function board_init_f - - - - --- 2019-09-19 Philippe REYNES trini Accepted
[U-Boot,V2,1/4] sandbox: enable command aes pytest: add a simple test to check the command aes - - 1 - --- 2019-09-23 Philippe REYNES sjg Superseded
[U-Boot,V2,2/4] sandbox64: enable command aes pytest: add a simple test to check the command aes - - - - --- 2019-09-23 Philippe REYNES sjg Superseded
[U-Boot,V2,3/4] cmd: aes: use map_sysmem when accessing memory pytest: add a simple test to check the command aes - - - - --- 2019-09-23 Philippe REYNES sjg Superseded
[U-Boot,1/4] aes: add a define for the size of a block aes: add support for aes192 and aes256 - - 1 - --- 2019-09-23 Philippe REYNES tomcwarren Superseded
[U-Boot,2/4] aes: add support of aes192 and aes256 aes: add support for aes192 and aes256 - - - - --- 2019-09-23 Philippe REYNES tomcwarren Superseded
[U-Boot,3/4] tegra20: crypto: update code to use new aes api aes: add support for aes192 and aes256 - - - - --- 2019-09-23 Philippe REYNES tomcwarren Superseded
[U-Boot,V3,1/4] sandbox: enable command aes pytest: add a simple test to check the command aes - - 2 - --- 2019-09-24 Philippe REYNES sjg Accepted
[U-Boot,V3,2/4] sandbox64: enable command aes pytest: add a simple test to check the command aes - - 2 - --- 2019-09-24 Philippe REYNES sjg Accepted
[U-Boot,V3,3/4] cmd: aes: use map_sysmem when accessing memory pytest: add a simple test to check the command aes - - 2 - --- 2019-09-24 Philippe REYNES sjg Accepted
[U-Boot] ubi: env: fix redundand management [U-Boot] ubi: env: fix redundand management - - 1 - --- 2019-10-14 Philippe REYNES hs Accepted
[U-Boot,V4] pytest: add a new test for aes [U-Boot,V4] pytest: add a new test for aes - - - - --- 2019-10-28 Philippe REYNES Superseded
[U-Boot,V2,1/4] aes: add a define for the size of a block aes: add support for aes192 and aes256 - - 1 - --- 2019-10-29 Philippe REYNES trini Superseded
[U-Boot,V2,2/4] aes: add support of aes192 and aes256 aes: add support for aes192 and aes256 - - 1 - --- 2019-10-29 Philippe REYNES trini Superseded
[U-Boot,V2,3/4] tegra20: crypto: update code to use new aes api aes: add support for aes192 and aes256 - - 1 - --- 2019-10-29 Philippe REYNES trini Superseded
[U-Boot,V2,4/4] pytest: aes: add test for aes192 and aes256 aes: add support for aes192 and aes256 - - - - --- 2019-10-29 Philippe REYNES trini Superseded
[U-Boot,V3,1/5] aes: add a define for the size of a block aes: add support for aes192 and aes256 - - 1 - --- 2019-11-15 Philippe REYNES trini Superseded
[U-Boot,V3,2/5] aes: add support of aes192 and aes256 aes: add support for aes192 and aes256 - - 1 - --- 2019-11-15 Philippe REYNES trini Superseded
[U-Boot,V3,3/5] tegra20: crypto: update code to use new aes api aes: add support for aes192 and aes256 - - 1 - --- 2019-11-15 Philippe REYNES trini Superseded
[U-Boot,V3,4/5] aes: add test unit for aes128 aes: add support for aes192 and aes256 - - 1 - --- 2019-11-15 Philippe REYNES trini Superseded
[U-Boot,V3,5/5] aes: add test unit for aes196 and aes256 aes: add support for aes192 and aes256 - - 1 - --- 2019-11-15 Philippe REYNES trini Superseded
[U-Boot] iminfo: add missing map_sysmem [U-Boot] iminfo: add missing map_sysmem - - - - --- 2019-12-02 Philippe REYNES trini Accepted
[U-Boot] cmd: cp: add missing map_sysmem [U-Boot] cmd: cp: add missing map_sysmem - - - - --- 2019-12-02 Philippe REYNES trini Accepted
cmd_ut: add a parameter prefix to the function cmd_ut_category cmd_ut: add a parameter prefix to the function cmd_ut_category - - - 1 --- 2019-12-17 Philippe REYNES trini Accepted
[1/2] mkimage: fit: add support to encrypt image with aes [1/2] mkimage: fit: add support to encrypt image with aes - - - - --- 2019-12-18 Philippe REYNES trini Accepted
[2/2] u-boot: fit: add support to decrypt fit with aes [1/2] mkimage: fit: add support to encrypt image with aes - - - - --- 2019-12-18 Philippe REYNES trini Accepted
[V4,1/4] aes: add a define for the size of a block aes: add support for aes192 and aes256 - - 1 - --- 2020-01-06 Philippe REYNES trini Accepted
[V4,2/4] aes: add support of aes192 and aes256 aes: add support for aes192 and aes256 - - 1 - --- 2020-01-06 Philippe REYNES trini Accepted
[V4,3/4] aes: add test unit for aes128 aes: add support for aes192 and aes256 - - 1 - --- 2020-01-06 Philippe REYNES trini Accepted
[V4,4/4] aes: add test unit for aes196 and aes256 aes: add support for aes192 and aes256 - - 1 - --- 2020-01-06 Philippe REYNES trini Accepted
[1/8] bcm68360: add initial support [1/8] bcm68360: add initial support - - - - --- 2020-01-07 Philippe REYNES trini Accepted
[2/8] watchdog: bcm6345: allow to use this driver on arm bcm68360 [1/8] bcm68360: add initial support - - - - --- 2020-01-07 Philippe REYNES trini Accepted
[3/8] spi: bcm63xx-hsspi: allow to use this driver on arm bcm68360 [1/8] bcm68360: add initial support - - - - --- 2020-01-07 Philippe REYNES trini Accepted
[4/8] nand: brcmnand: add bcm68360 support [1/8] bcm68360: add initial support - - - - --- 2020-01-07 Philippe REYNES trini Accepted
[5/8] led: bcm6858: allow to use this driver on arm bcm68360 [1/8] bcm68360: add initial support - - - - --- 2020-01-07 Philippe REYNES trini Accepted
[6/8] gpio: bcm6345: allow to use this driver on arm bcm68360 [1/8] bcm68360: add initial support - - - - --- 2020-01-07 Philippe REYNES trini Accepted
[7/8] gpio: do not include <asm/arch/gpio.h> on ARCH_BCM68360 [1/8] bcm68360: add initial support - - - - --- 2020-01-07 Philippe REYNES trini Accepted
[8/8] bcm968360bg: add initial support [1/8] bcm68360: add initial support - - - - --- 2020-01-07 Philippe REYNES trini Accepted
cmd: tpm: add a subcommand device cmd: tpm: add a subcommand device - - - - --- 2020-01-08 Philippe REYNES sjg Superseded
[V2,1/2] tpm: add a helper to iterate on all tpm devices [V2,1/2] tpm: add a helper to iterate on all tpm devices - - 2 - --- 2020-01-09 Philippe REYNES sjg Superseded
[V2,2/2] cmd: tpm: add a subcommand device [V2,1/2] tpm: add a helper to iterate on all tpm devices - - 2 - --- 2020-01-09 Philippe REYNES sjg Superseded
test/cmd_ut.c: fix cmd_ut_category test/cmd_ut.c: fix cmd_ut_category - 1 - - --- 2020-01-09 Philippe REYNES trini Accepted
[V3,1/2] tpm: add a helper to iterate on all tpm devices [V3,1/2] tpm: add a helper to iterate on all tpm devices - - 2 - --- 2020-01-09 Philippe REYNES sjg Accepted
[V3,2/2] cmd: tpm: add a subcommand device [V3,1/2] tpm: add a helper to iterate on all tpm devices - - 2 - --- 2020-01-09 Philippe REYNES sjg Accepted
test: aes: fix memleak test: aes: fix memleak - - - - --- 2020-02-06 Philippe REYNES trini Accepted
tools: image-host.c: remove uboot_aes.h tools: image-host.c: remove uboot_aes.h - - - - --- 2020-02-18 Philippe REYNES trini Accepted
[1/6] bcm6750: add initial support [1/6] bcm6750: add initial support - - - - --- 2020-03-06 Philippe REYNES trini Deferred
[2/6] gpio: do not include <asm/arch/gpio.h> on ARCH_BCM6750 [1/6] bcm6750: add initial support - - - - --- 2020-03-06 Philippe REYNES trini Deferred
[3/6] gpio: bcm6345: allow to use this driver on arm bcm6750 [1/6] bcm6750: add initial support - - - - --- 2020-03-06 Philippe REYNES trini Deferred
[4/6] nand: brcmnand: add bcm6750 support [1/6] bcm6750: add initial support - - - - --- 2020-03-06 Philippe REYNES trini Deferred
[5/6] watchdog: bcm6345: allow to use this driver on arm bcm6750 [1/6] bcm6750: add initial support - - - - --- 2020-03-06 Philippe REYNES trini Deferred
[6/6] bcm96750ref1: add initial support [1/6] bcm6750: add initial support - - - - --- 2020-03-06 Philippe REYNES trini Deferred
« 1 2 ... 676 677 678 … 1794 1795 »