Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 10 ... 12 13 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,v4] dm: sf: Add Atmel DataFlash spi flash driver 0 0 0 2015-05-14 Haikun.Wang@freescale.com New
[U-Boot,v4,8/8] main: Use autoconf in main_loop() 0 1 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,7/8] main: Use autoconf in command line reading 0 1 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,6/8] main: Use autoconf for parser selection 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,5/8] main: Use autoconf for boot_delay code 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,4/8] main: Use autoconf to remove #ifdefs around process_boot_delay() 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,4/4] add test for two 'loadables' 0 1 0 2015-05-21 Karl Apsite New
[U-Boot,v4,3/8] main: Remove CONFIG #ifdefs from the abortboot() code 0 1 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,3/4] Combine bootm_find_<thing> functions together 0 1 0 2015-05-21 Karl Apsite New
[U-Boot,v4,3/3] imx:mx6 set normal APS and standby PFM mode 0 0 0 2015-01-16 Peng Fan bobenstein New
[U-Boot,v4,26/26] sandbox: Enable env unit tests 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,25/26] test: env: Add a test of the new regex behavior for attrs 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,24/26] test: env: Add test for verifying env attrs 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,23/26] test: env: Add test framework for env 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,22/26] test: dm: Recover the driver model tree after tests 1 0 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,21/26] test: Return values from the asserts compatible with cmds 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,20/26] test: dm: eth: Handle failed test env cleanup 0 0 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,2/8] main: Use autoconf for boot retry feature 0 1 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,2/4] add boot_get_loadables() to load listed images 0 1 0 2015-05-21 Karl Apsite New
[U-Boot,v4,2/3] pmic:pfuze implement pmic_mode_init 0 0 0 2015-01-16 Peng Fan bobenstein New
[U-Boot,v4,19/26] test: dm: Don't bail on all tests if one test fails 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,18/26] test: Move the unit tests to their own menu 1 0 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,17/26] test: dm: Move the dm tests over to the ut command 1 0 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,16/26] test: Add a common unit test command 1 0 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,15/26] test: Generalize the unit test framework 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,14/26] net: Handle ethaddr changes as an env callback 0 0 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,13/26] net: Remove duplicate bootfile syncing functionality 0 0 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,12/26] net: Add default flags for common net env vars 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,11/26] net: Use env callbacks for net variables 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,10/26] net: Apply default format rules to all ethaddr 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,1/8] Implement autoconf header file 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,1/4] mkimage will now report information about loadable 0 1 0 2015-05-21 Karl Apsite New
[U-Boot,v4,1/3] pmic:pfuz100 add switch mode and more registers 0 1 0 2015-01-16 Peng Fan bobenstein New
[U-Boot,v4,09/26] env: Distinguish finer between source of env change 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,08/26] env: Add regex support to env_attrs 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,07/26] env: Allow env_attr_walk to pass a priv * to callback 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,06/26] env: Simplify the reverse_strstr() interface 0 0 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,05/26] env: Fix return values in env_attr_lookup() 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,04/26] kconfig: Move REGEX to Kconfig 1 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,03/26] sandbox: Enable some ENV commands 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,02/26] sandbox: Use defconfig to enable features 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v4,01/26] sandbox: Cleanup order and extra defines in defconfig 0 1 0 2015-05-07 Joe Hershberger trini New
[U-Boot,v3] tpm: Add TPM command library 0 0 0 2013-02-28 Che-liang Chiou trini New
[U-Boot,v3] sunxi: Make DRAM_ODT_EN Kconfig setting a bool 1 0 0 2015-05-19 Hans de Goede New
[U-Boot,v3] powerpc/b4860qds:Update README for DIP switch information 0 0 0 2015-05-14 Raghav Dogra yorksun New
[U-Boot,v3] dm: sf: Add Atmel DataFlash spi flash driver 1 0 0 2015-05-05 Haikun.Wang@freescale.com jagan Under Review
[U-Boot,v3] command/cache: Add flush command 0 0 0 2013-04-05 York Sun trini New
[U-Boot,v3] arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target 0 0 0 2014-11-07 Stefan Roese marex New
[U-Boot,v3] arm, imx6: add support for aristainetos2 board 0 0 0 2015-05-18 Heiko Schocher sbabic New
[U-Boot,v3] arm, imx6, i2c: add I2C4 for MX6DL 0 0 0 2015-05-18 Heiko Schocher sbabic New
[U-Boot,v3:,DNS320,support,4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3:,DNS320,support,3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3:,DNS320,support,2/4] kirkwood: Add support for the D-Link DNS-320 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3:,DNS320,support,1/4] kirkwood: Rename dns325 to dnskw 0 0 0 2014-05-22 Bastien ROUCARIES prafulla@marvell.com New
[U-Boot,v3,9/9] sf: Give proper spacing between flash table params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,8/9] sf: Update Winbond flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,7/9] sf: Update Micron flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,6/9] sf: Update Spansion flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,6/6] board: add stm3210e-eval board support 0 0 0 2015-05-05 Matt Porter trini New
[U-Boot,v3,6/6] SHEEVAPLUG : REDEFINE MTDPARTS 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,5/9] sf: Update Macronix flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,5/6] serial: stm32: add stm32f1 support 0 0 0 2015-05-05 Matt Porter trini New
[U-Boot,v3,5/6] SHEEVAPLUG : ADD FDT support 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,5/5] RFC: tegra: Convert to using environment files 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,4/9] sf: Update GigaDevice flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,4/6] gpio: stm32: add stm32f1 support 0 0 0 2015-05-05 Matt Porter trini New
[U-Boot,v3,4/6] SHEEVAPLUG : ADD CONFIG_CMD_FAT 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,4/5] env: Allow environment files to use the C preprocessor 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,4/4] x86: minnowmax: initialize the pin-muxing from device tree 1 0 0 2015-05-12 Gabriel Huau sjg New
[U-Boot,v3,4/4] db-88f6820-gp.h: Load data blobs into lower memory 1 0 0 2015-05-18 Kevin Smith New
[U-Boot,v3,4/4] autoboot.c: Add feature to stop autobooting via SHA256 encrypted password 0 1 0 2015-05-18 Stefan Roese New
[U-Boot,v3,4/4] arm: ls102xa: Enable Driver Model SPI for ls1021atwr 0 1 1 2015-05-18 Haikun.Wang@freescale.com yorksun New
[U-Boot,v3,4/4] add test for two 'loadables' 1 0 0 2015-05-18 Karl Apsite New
[U-Boot,v3,3/9] sf: Update EON flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,3/6] SHEEVAPLUG : ADD generic board define 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,3/6] ARMv7M: add STM32F1 support 0 0 0 2015-05-05 Matt Porter trini New
[U-Boot,v3,3/5] Allow U-Boot scripts to be placed in a .env file 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,3/4] x86: gpio: add pinctrl support from the device tree 0 0 0 2015-05-12 Gabriel Huau sjg New
[U-Boot,v3,3/4] mv-common.h: Include support for device trees 1 0 0 2015-05-18 Kevin Smith New
[U-Boot,v3,3/4] autoboot.c: Move config options to Kconfig 0 1 0 2015-05-18 Stefan Roese New
[U-Boot,v3,3/4] arm: ls102xa: Enable Driver Model SPI for ls1021aqds 0 0 0 2015-05-18 Haikun.Wang@freescale.com yorksun New
[U-Boot,v3,3/4] Combine bootm_find_<thing> functions together 1 0 0 2015-05-18 Karl Apsite New
[U-Boot,v3,3/3] usb: Early failure when the first descriptor read fails or is invalid 0 0 0 2015-04-04 Paul Kocialkowski marex New
[U-Boot,v3,3/3] arm: add support for LaCie CloudBox 0 0 0 2013-07-01 Frederic Leroy prafulla@marvell.com New
[U-Boot,v3,2/9] sf: Update Atmel flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review
[U-Boot,v3,2/6] common/cmd_boot: keep ARM v7M in thumb mode during do_go_exec() 0 0 0 2015-05-05 Matt Porter trini New
[U-Boot,v3,2/6] SHEEVAPLUG : FIX multiple defines 0 0 0 2014-12-17 DrEagle prafulla@marvell.com New
[U-Boot,v3,2/5] Make 'run' use run_command_list() instead of run_command() 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,2/4] autoboot.c: Remove CONFIG_AUTOBOOT_STOP_STR2 and CONFIG_AUTOBOOT_DELAY_STR2 0 2 0 2015-05-18 Stefan Roese New
[U-Boot,v3,2/4] arm: mvebu: Update CBAR with SOC regs base 1 0 0 2015-05-18 Kevin Smith New
[U-Boot,v3,2/4] add boot_get_loadables() to load listed images 0 0 0 2015-05-18 Karl Apsite New
[U-Boot,v3,2/3] usb: Check usb_new_device for failure 0 0 0 2015-04-04 Paul Kocialkowski marex New
[U-Boot,v3,2/3] LaCie/common: Uses #defines for ethernet phy leds setup 0 0 0 2013-07-01 Frederic Leroy prafulla@marvell.com New
[U-Boot,v3,2/2] common/lcd: use lcd_setcolreg() to setup CLUT 0 0 0 2012-11-06 Andreas Bießmann ag Under Review
[U-Boot,v3,2/2] arm: marvell: fix ENV and MTDPARTS for sheevaplug 0 0 0 2014-10-25 DrEagle prafulla@marvell.com New
[U-Boot,v3,2/2] Clean all defconfigs with savedefconfig 0 0 0 2015-05-12 Joe Hershberger trini New
[U-Boot,v3,2/2] ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x 2 0 0 2015-05-18 Masahiro Yamada monstr New
[U-Boot,v3,13/14] dm: tegra: Enable driver model in SPL and adjust the GPIO driver 0 0 0 2014-11-11 Simon Glass sjg New
[U-Boot,v3,10/10] tools: Add support for Dove to kwboot 1 0 0 2013-01-16 Sebastian Hesselbarth prafulla@marvell.com New
[U-Boot,v3,1/9] sf: Update SST flash params 0 0 0 2014-12-10 Bin Meng jagan Under Review