Show patches with: none      |   180753 patches
« 1 2 ... 729 730 731 … 1807 1808 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,v3,6/8] dt-bindings: phy: add a document for MediaTek tphy add PCIe, its PHY and AHCI support for mt7623 - - - - --- 2019-08-06 Frank Wunderlich trini Changes Requested
[U-Boot,v3,5/8] dt-bindings: pcie: add a document for MT7623 PCIe controller add PCIe, its PHY and AHCI support for mt7623 - - - - --- 2019-08-06 Frank Wunderlich trini Changes Requested
[U-Boot,v3,4/8] arm: dts: split mtk-reset.h into per-chip header add PCIe, its PHY and AHCI support for mt7623 - - - 1 --- 2019-08-06 Frank Wunderlich trini Changes Requested
[U-Boot,v3,3/8] arm: dts: add PCIe controller for MT7623 SoC add PCIe, its PHY and AHCI support for mt7623 - - - 1 --- 2019-08-06 Frank Wunderlich trini Changes Requested
[U-Boot,v3,2/8] phy: mediatek: add MediaTek T-PHY support for PCIe add PCIe, its PHY and AHCI support for mt7623 - - - 1 --- 2019-08-06 Frank Wunderlich trini Changes Requested
[U-Boot,v3,1/8] pci: mediatek: add PCIe controller support for MT7623 add PCIe, its PHY and AHCI support for mt7623 - - - 1 --- 2019-08-06 Frank Wunderlich trini Changes Requested
[U-Boot,14/14] configs: am65x_evm_a53_defconfig: Enable CONFIG_CMD_REMOTEPROC net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Not Applicable
[U-Boot,13/14] configs: am65x_evm_a53_defconfig: Enable CONFIG_REMOTEPROC_TI_PRU net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,12/14] arm64: dts: ti: am654-base-board: add ICSSG2 Ethernet support net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,11/14] arm: dts: k3-am65-main: Add pruss nodes for ICSSG2 net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,10/14] arm: dts: k3-am65-main: Add scm_conf node net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,09/14] arm: dts: k3-am654-base-board-u-boot: Add icssg specific msmc_ram carveout nodes net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,08/14] arm: dts: k3-am65-main: Add msmc_ram node net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,07/14] net: ti: icssg-prueth: Workaround to shutdown the prueth firmware net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,06/14] net: ti: icssg-prueth: Add ICSSG ethernet driver net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,05/14] remoteproc: pruss: add PRU remoteproc driver net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,04/14] soc: ti: pruss: add a misc driver for PRUSS in TI SoCs net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,03/14] misc: uclass: Introduce misc_init_by_ofnode net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,02/14] net: eth-uclass: call stop only for active devices net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot,01/14] net: eth-uclass: eth_get_dev based on SEQ_ALIAS instead of probe order net: ti: icssg: Add prueth support - - - - --- 2019-08-06 Keerthy trini Changes Requested
[U-Boot] i2c: mxc: add CONFIG_CLK support [U-Boot] i2c: mxc: add CONFIG_CLK support - - 2 - --- 2019-08-06 Peng Fan sbabic Superseded
[U-Boot] tools: imx8mimage: fix HDMI/FIT parsing [U-Boot] tools: imx8mimage: fix HDMI/FIT parsing - - 2 - --- 2019-08-06 Peng Fan sbabic Accepted
[U-Boot] pinctrl: imx: use devfdt_get_addr_size_index [U-Boot] pinctrl: imx: use devfdt_get_addr_size_index - - - - --- 2019-08-06 Peng Fan sbabic Accepted
[U-Boot,4/4] clk: imx: add i.MX8MM clk driver Prepare i.MX8MM clk 1 - 1 - --- 2019-08-06 Peng Fan lukma Superseded
[U-Boot,3/4] clk: imx: add i.MX8M composite clk support Prepare i.MX8MM clk - - 1 - --- 2019-08-06 Peng Fan lukma Superseded
[U-Boot,2/4] clk: imx: add pll14xx driver Prepare i.MX8MM clk - - - - --- 2019-08-06 Peng Fan lukma Superseded
[U-Boot,1/4] clk: imx: add Kconfig entry for i.MX8MM Prepare i.MX8MM clk - - - - --- 2019-08-06 Peng Fan lukma Superseded
[U-Boot] board: amlogic: document alternative libretech-cc installation methods [U-Boot] board: amlogic: document alternative libretech-cc installation methods - - - - --- 2019-08-06 Daniel Drake narmstrong Accepted
[U-Boot,7/7] mmc: tangier_sdhci: fix uninitialized pointer deref on probe [U-Boot,1/7] mmc: atmel_sdhci: fix uninitialized pointer deref on probe - 1 - - --- 2019-08-06 Peng Fan freenix Accepted
[U-Boot,6/7] mmc: sdhci-cadence: fix uninitialized pointer deref on probe [U-Boot,1/7] mmc: atmel_sdhci: fix uninitialized pointer deref on probe 1 1 - - --- 2019-08-06 Peng Fan freenix Accepted
[U-Boot,5/7] mmc: s5p: fix uninitialized pointer deref on probe [U-Boot,1/7] mmc: atmel_sdhci: fix uninitialized pointer deref on probe - 1 - - --- 2019-08-06 Peng Fan freenix Accepted
[U-Boot,4/7] mmc: pci: fix uninitialized pointer deref on probe [U-Boot,1/7] mmc: atmel_sdhci: fix uninitialized pointer deref on probe - 1 1 - --- 2019-08-06 Peng Fan freenix Accepted
[U-Boot,3/7] mmc: msm_sdhci: fix uninitialized pointer deref on probe [U-Boot,1/7] mmc: atmel_sdhci: fix uninitialized pointer deref on probe - 1 - - --- 2019-08-06 Peng Fan freenix Accepted
[U-Boot,2/7] mmc: bcm: fix uninitialized pointer deref on probe [U-Boot,1/7] mmc: atmel_sdhci: fix uninitialized pointer deref on probe - 1 - - --- 2019-08-06 Peng Fan freenix Accepted
[U-Boot,1/7] mmc: atmel_sdhci: fix uninitialized pointer deref on probe [U-Boot,1/7] mmc: atmel_sdhci: fix uninitialized pointer deref on probe - 1 - 1 --- 2019-08-06 Peng Fan freenix Accepted
[U-Boot] Update include/android_image.h from AOSP [U-Boot] Update include/android_image.h from AOSP - - 1 - --- 2019-08-05 Alex Deymo trini Accepted
[U-Boot] arm: K3: sysfw-loader: Do not require full printf() for version info [U-Boot] arm: K3: sysfw-loader: Do not require full printf() for version info - 1 1 - --- 2019-08-05 Andreas Dannenberg trini Accepted
[U-Boot] firmware: ti_sci: Parse all resource ranges even if some is not available [U-Boot] firmware: ti_sci: Parse all resource ranges even if some is not available - - 1 - --- 2019-08-05 Andreas Dannenberg trini Accepted
[U-Boot] common: image-android-dt: Fix logic in print fdt info routine [U-Boot] common: image-android-dt: Fix logic in print fdt info routine - - - - --- 2019-08-05 Sam Protsenko trini Accepted
[U-Boot,v3,10/10] apalis-tk1: remove non-esential power rails on boot apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk sbabic Accepted
[U-Boot,v3,09/10] apalis-tk1: support v1.2 hardware revision apalis-tk1: fixes/updates for v2019.10 - - - - --- 2019-08-05 Igor Opaniuk sbabic Deferred
[U-Boot,v3,08/10] apalis-tk1: remove default vesa vga mode from vidargs apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk sbabic Accepted
[U-Boot,v3,07/10] apalis-tk1/t30: colibri_t30: display reset reason apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk sbabic Accepted
[U-Boot,v3,06/10] apalis-tk1: switch to zImage apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk sbabic Deferred
[U-Boot,v3,05/10] apalis-tk1: add pcie_aspm=off to defargs apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk sbabic Accepted
[U-Boot,v3,04/10] apalis-tk1: enable user debug by default apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk sbabic Accepted
[U-Boot,v3,03/10] apalis-tk1: provide proper USB vendor id apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk sbabic Accepted
[U-Boot,v3,02/10] apalis-tk1: set apalis gpio 8 aka fan_en apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk sbabic Accepted
[U-Boot,v3,01/10] apalis-tk1: do not explicitly release reset_moci# apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk sbabic Accepted
[U-Boot,v2,10/10] apalis-tk1: remove non-esential power rails on boot apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk Superseded
[U-Boot,v2,09/10] apalis-tk1: support v1.2 hardware revision apalis-tk1: fixes/updates for v2019.10 - - - - --- 2019-08-05 Igor Opaniuk Superseded
[U-Boot,v2,08/10] apalis-tk1: remove default vesa vga mode from vidargs apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk Superseded
[U-Boot,v2,07/10] apalis-tk1/t30: colibri_t30: display reset reason apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk Superseded
[U-Boot,v2,06/10] apalis-tk1: switch to zImage apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk Superseded
[U-Boot,v2,05/10] apalis-tk1: add pcie_aspm=off to defargs apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk Superseded
[U-Boot,v2,04/10] apalis-tk1: enable user debug by default apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk Superseded
[U-Boot,v2,03/10] apalis-tk1: provide proper USB vendor id apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk Superseded
[U-Boot,v2,02/10] apalis-tk1: set apalis gpio 8 aka fan_en apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk Superseded
[U-Boot,v2,01/10] apalis-tk1: do not explicitly release reset_moci# apalis-tk1: fixes/updates for v2019.10 - - 1 - --- 2019-08-05 Igor Opaniuk Superseded
[U-Boot] Adds `serial#_trimmed` env var for RPI boards [U-Boot] Adds `serial#_trimmed` env var for RPI boards - - - - --- 2019-08-05 Lyle Franklin Deferred
[U-Boot] Adds basic support for ProxyDHCP [U-Boot] Adds basic support for ProxyDHCP - - - - --- 2019-08-05 Lyle Franklin trini Awaiting Upstream
[U-Boot,v4,15/15] spl: fit: Allow the board to tell if more images must be loaded from FIT Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,14/15] include: board: provide empty stubs when the BOARD option is not selected Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,13/15] drivers: board: Add get_fit_loadable() Add support for applications of overlays in SPL - - - - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,12/15] drivers: board: Make the board drivers available in SPL Add support for applications of overlays in SPL - - - - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,11/15] spl: fit: constify the output parameter of spl_fit_get_image_name() Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,10/15] Makefile: Query the SPL Fit Generator for its dependencies Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,09/15] Makefile: Fix u-boot.itb generation when building outside the source tree Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,08/15] Makefile: Fix tests for CONFIG_SPL_LOAD_FIT and CONFIG_SPL_FIT_GENERATOR Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,07/15] Makefile.lib: include /__symbols__ in dtb if SPL_LOAD_FIT_APPLY_OVERLAY is enabled Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,06/15] spl: fit: be more verbose when an error occurs when applying the overlays Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,05/15] spl: fit: Do not fail immediately if an overlay is not available Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,04/15] spl: fit: allocate a temporary buffer to load the overlays Add support for applications of overlays in SPL - - - - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,03/15] spl: fit: Make room in the FDT before applying overlays Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,02/15] spl: fit: Add support for applying DT overlay Add support for applications of overlays in SPL - - 1 - --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot,v4,01/15] spl: fit: don't load the firmware twice Add support for applications of overlays in SPL - - 1 1 --- 2019-08-05 Jean-Jacques Hiblot trini Superseded
[U-Boot] dm: pci: Change to config device according to Header Type [U-Boot] dm: pci: Change to config device according to Header Type - - - - --- 2019-08-05 Z.Q. Hou sjg Changes Requested
[U-Boot] misc: i2c_eeprom: verify that the chip is functional at probe() [U-Boot] misc: i2c_eeprom: verify that the chip is functional at probe() - - - - --- 2019-08-05 Baruch Siach hs Awaiting Upstream
[U-Boot,v2] imx: variscite: Fix regression of SPL and U-boot booting [U-Boot,v2] imx: variscite: Fix regression of SPL and U-boot booting - - 1 - --- 2019-08-04 Saravanan Sekar sbabic Accepted
[U-Boot,v2,6/6] ata: ahci: Don't forget to clear upper address regs. U-boot: add PCIe, its PHY and AHCI support - - - 1 --- 2019-08-04 Frank Wunderlich trini Superseded
[U-Boot,v2,5/6] ahci-pci: ASM1061 report wrong class, but support AHCI. U-boot: add PCIe, its PHY and AHCI support - - - 1 --- 2019-08-04 Frank Wunderlich trini Superseded
[U-Boot,v2,4/6] arm: dts: split mtk-reset.h into per-chip header U-boot: add PCIe, its PHY and AHCI support - - - 1 --- 2019-08-04 Frank Wunderlich trini Superseded
[U-Boot,v2,3/6] arm: dts: add PCIe controller for MT7623 SoC U-boot: add PCIe, its PHY and AHCI support - - - 1 --- 2019-08-04 Frank Wunderlich trini Superseded
[U-Boot,v2,2/6] phy: mediatek: add MediaTek T-PHY support for PCIe U-boot: add PCIe, its PHY and AHCI support - - - 1 --- 2019-08-04 Frank Wunderlich trini Superseded
[U-Boot,v2,1/6] pci: mediatek: add PCIe controller support for MT7623 U-boot: add PCIe, its PHY and AHCI support - - - 1 --- 2019-08-04 Frank Wunderlich trini Superseded
[U-Boot] imx: variscite: Fix regression of SPL and U-boot booting [U-Boot] imx: variscite: Fix regression of SPL and U-boot booting - - - - --- 2019-08-04 Saravanan Sekar sbabic Superseded
[U-Boot,RFC,DO-NOT-APPLY,1/1] .travis.yml: use GRUB from Docker image [U-Boot,RFC,DO-NOT-APPLY,1/1] .travis.yml: use GRUB from Docker image - - - - --- 2019-08-04 Heinrich Schuchardt trini RFC
[U-Boot,1/1] Dockerfile: build QEMU target for RISC-V 64bit [U-Boot,1/1] Dockerfile: build QEMU target for RISC-V 64bit - - 1 - --- 2019-08-04 Heinrich Schuchardt trini Accepted
[U-Boot,1/1] Dockerfile: build GRUB UEFI target for RISC-V 64bit [U-Boot,1/1] Dockerfile: build GRUB UEFI target for RISC-V 64bit - - 1 - --- 2019-08-04 Heinrich Schuchardt trini Accepted
[U-Boot] Pull request for UEFI sub-system for v2019.10-rc2 [U-Boot] Pull request for UEFI sub-system for v2019.10-rc2 - - - - --- 2019-08-04 Heinrich Schuchardt trini Accepted
[U-Boot] ARM: da850-evm: Enable SPI Flash and NAND Flash when booting NOR [U-Boot] ARM: da850-evm: Enable SPI Flash and NAND Flash when booting NOR - - - - --- 2019-08-03 Adam Ford trini Accepted
[U-Boot,v9,9/9] x86: Skip setting up MTRRs in slimbootloader x86: Add basic Slim Bootloader payload support - - 2 1 --- 2019-08-03 Park, Aiden bmeng Accepted
[U-Boot,v9,8/9] board: intel: Add new slimbootloader board x86: Add basic Slim Bootloader payload support - - 2 1 --- 2019-08-03 Park, Aiden bmeng Accepted
[U-Boot,v9,7/9] x86: slimbootloader: Add a slimbootloader device tree x86: Add basic Slim Bootloader payload support - - 2 1 --- 2019-08-03 Park, Aiden bmeng Accepted
[U-Boot,v9,6/9] x86: slimbootloader: Set TSC information for tsc_timer x86: Add basic Slim Bootloader payload support - - 1 1 --- 2019-08-03 Park, Aiden bmeng Accepted
[U-Boot,v9,5/9] x86: slimbootloader: Add serial driver x86: Add basic Slim Bootloader payload support - - 2 1 --- 2019-08-03 Park, Aiden bmeng Accepted
[U-Boot,v9,4/9] x86: slimbootloader: Add memory configuration x86: Add basic Slim Bootloader payload support - - 2 1 --- 2019-08-03 Park, Aiden bmeng Accepted
[U-Boot,v9,3/9] x86: Add a common HOB library x86: Add basic Slim Bootloader payload support - - 2 1 --- 2019-08-03 Park, Aiden bmeng Accepted
[U-Boot,v9,2/9] x86: lib: fsp: Use EFI_GUID and efi_guid_t x86: Add basic Slim Bootloader payload support - - 2 1 --- 2019-08-03 Park, Aiden bmeng Accepted
[U-Boot,v9,1/9] x86: Add new slimbootloader CPU type x86: Add basic Slim Bootloader payload support - - 2 1 --- 2019-08-03 Park, Aiden bmeng Accepted
« 1 2 ... 729 730 731 … 1807 1808 »