| Message ID | 20190221170207.17808-1-m-karicheri2@ti.com |
|---|---|
| Headers | show |
| Series | Add netcp networking support on K2G ICE EVM | expand |
Hello Maintainer, On 02/21/2019 12:02 PM, Murali Karicheri wrote: > This patch series add networking capability to K2G ICE EVM > based on netcp driver. Networking function has been tested > using the latest master branch from u-boot repo. Following > boot mode has been tested for networking. > > Net boot (tftp images over ethernet interface and boot kernel) > log at https://pastebin.ubuntu.com/p/b3nyCXPhWc/ > MMC boot: (load images from boot folder of rootfs and boot kernel) > log at https://pastebin.ubuntu.com/p/FWycmKd9KB/ > > Used Linux upstream linux kernel version 4.19.9 for the tests. > > Please review and apply if this looks good. > > Thanks > > Revision history: > > v3: Addressed comment to use KConfig for enable TI PHY driver and also > netcp driver comment to use proper function as in cpsw driver. > Rebased to latest on master branch. > v2: Collected Reviewed-by for patch 1 and 2. Rebased to latest > on master > > > Murali Karicheri (7): > ARM: k2g-ice: Add pinmux support for rgmii interface > ARM: k2g-gp-evm: update to rgmii pinmux configuration > net: netcp: add support for phy with rgmii ids > ARM: k2g: add a workaround to reset the phy > ARM: dts: k2g-evm: remove unused phy-mode property from phy node > k2g: config enable ti phy dp83867 for k2g > ARM: dts: k2g-ice: add dt node for netcp > > arch/arm/dts/keystone-k2g-evm.dts | 1 - > arch/arm/dts/keystone-k2g-ice.dts | 35 +++++++++++++ > .../mach-keystone/include/mach/hardware-k2g.h | 3 ++ > arch/arm/mach-keystone/include/mach/mux-k2g.h | 5 ++ > board/ti/ks2_evm/board_k2g.c | 15 ++++++ > board/ti/ks2_evm/mux-k2g.h | 51 +++++++++++++------ > configs/k2g_evm_defconfig | 1 + > drivers/net/ti/keystone_net.c | 22 +++++++- > 8 files changed, 116 insertions(+), 17 deletions(-) > Could you please merge this to master at the earliest if there are no more comments? Thanks Murali
This patch series add networking capability to K2G ICE EVM based on netcp driver. Networking function has been tested using the latest master branch from u-boot repo. Following boot mode has been tested for networking. Net boot (tftp images over ethernet interface and boot kernel) log at https://pastebin.ubuntu.com/p/b3nyCXPhWc/ MMC boot: (load images from boot folder of rootfs and boot kernel) log at https://pastebin.ubuntu.com/p/FWycmKd9KB/ Used Linux upstream linux kernel version 4.19.9 for the tests. Please review and apply if this looks good. Thanks Revision history: v3: Addressed comment to use KConfig for enable TI PHY driver and also netcp driver comment to use proper function as in cpsw driver. Rebased to latest on master branch. v2: Collected Reviewed-by for patch 1 and 2. Rebased to latest on master Murali Karicheri (7): ARM: k2g-ice: Add pinmux support for rgmii interface ARM: k2g-gp-evm: update to rgmii pinmux configuration net: netcp: add support for phy with rgmii ids ARM: k2g: add a workaround to reset the phy ARM: dts: k2g-evm: remove unused phy-mode property from phy node k2g: config enable ti phy dp83867 for k2g ARM: dts: k2g-ice: add dt node for netcp arch/arm/dts/keystone-k2g-evm.dts | 1 - arch/arm/dts/keystone-k2g-ice.dts | 35 +++++++++++++ .../mach-keystone/include/mach/hardware-k2g.h | 3 ++ arch/arm/mach-keystone/include/mach/mux-k2g.h | 5 ++ board/ti/ks2_evm/board_k2g.c | 15 ++++++ board/ti/ks2_evm/mux-k2g.h | 51 +++++++++++++------ configs/k2g_evm_defconfig | 1 + drivers/net/ti/keystone_net.c | 22 +++++++- 8 files changed, 116 insertions(+), 17 deletions(-)