| Message ID | 20171015010016.18815-1-f.fainelli@gmail.com |
|---|---|
| Headers | show |
| Series | net: phy: Add Broadcom BCM53xx switch driver | expand |
On 10/14/2017 06:00 PM, Florian Fainelli wrote: > (this time after subscribing to the list) > > Hi all, > > This patch series adds support for the Broadcom BCM53xx switches, in particular > BCM53125 which is found no the Lamobo R1 board. Thanks Stefan for the review. I suppose Joe should now queue those up, provided that he is happy with the patches and then submit a pull request? > > The driver is largely based on the DSA/b53 driver Linux driver and only > incorporates what is necessary to succesfully bring-up all ports (including the > management port) for boot over the network: > > => dhcp > dw_adjust_link: Speed: 1000, full duplex > BOOTP broadcast 1 > DHCP client bound to address 192.168.0.11 (3 ms) > Using ethernet@01c50000 device > TFTP from server 192.168.0.1; our IP address is 192.168.0.11 > Filename 'sun7i-a20-lamobo-r1-kernel.bin'. > Load address: 0x42000000 > Loading: ################################################################# > ################################################################# > ################################ > 11.6 MiB/s > done > Bytes transferred = 2371552 (242fe0 hex) > => > > > Florian Fainelli (4): > net: phy: Add Broadcom BCM53xx switch driver > net: designware: Pad small packets > net: phy: b53: Add b53_reg read/write commands > configs: Update Lamobo_R1 with B53 switch options > > configs/Lamobo_R1_defconfig | 3 + > drivers/net/designware.c | 4 + > drivers/net/phy/Kconfig | 14 + > drivers/net/phy/Makefile | 1 + > drivers/net/phy/b53.c | 767 ++++++++++++++++++++++++++++++++++++++++++++ > drivers/net/phy/phy.c | 3 + > include/phy.h | 1 + > 7 files changed, 793 insertions(+) > create mode 100644 drivers/net/phy/b53.c >
On 19.10.2017 23:50, Florian Fainelli wrote: > On 10/14/2017 06:00 PM, Florian Fainelli wrote: >> (this time after subscribing to the list) >> >> Hi all, >> >> This patch series adds support for the Broadcom BCM53xx switches, in particular >> BCM53125 which is found no the Lamobo R1 board. > > Thanks Stefan for the review. I suppose Joe should now queue those up, > provided that he is happy with the patches and then submit a pull request? Yes, this is how it usually works. Thanks, Stefan
Le 10/19/17 à 21:45, Stefan Roese a écrit : > On 19.10.2017 23:50, Florian Fainelli wrote: >> On 10/14/2017 06:00 PM, Florian Fainelli wrote: >>> (this time after subscribing to the list) >>> >>> Hi all, >>> >>> This patch series adds support for the Broadcom BCM53xx switches, in >>> particular >>> BCM53125 which is found no the Lamobo R1 board. >> >> Thanks Stefan for the review. I suppose Joe should now queue those up, >> provided that he is happy with the patches and then submit a pull >> request? > > Yes, this is how it usually works. Joe, should I do anything, are you happy with how the patches look like?
On 10/29/2017 08:30 PM, Florian Fainelli wrote: > Le 10/19/17 à 21:45, Stefan Roese a écrit : >> On 19.10.2017 23:50, Florian Fainelli wrote: >>> On 10/14/2017 06:00 PM, Florian Fainelli wrote: >>>> (this time after subscribing to the list) >>>> >>>> Hi all, >>>> >>>> This patch series adds support for the Broadcom BCM53xx switches, in >>>> particular >>>> BCM53125 which is found no the Lamobo R1 board. >>> >>> Thanks Stefan for the review. I suppose Joe should now queue those up, >>> provided that he is happy with the patches and then submit a pull >>> request? >> >> Yes, this is how it usually works. > > Joe, should I do anything, are you happy with how the patches look like? Ping? How do we get these moving?
(this time after subscribing to the list) Hi all, This patch series adds support for the Broadcom BCM53xx switches, in particular BCM53125 which is found no the Lamobo R1 board. The driver is largely based on the DSA/b53 driver Linux driver and only incorporates what is necessary to succesfully bring-up all ports (including the management port) for boot over the network: => dhcp dw_adjust_link: Speed: 1000, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.0.11 (3 ms) Using ethernet@01c50000 device TFTP from server 192.168.0.1; our IP address is 192.168.0.11 Filename 'sun7i-a20-lamobo-r1-kernel.bin'. Load address: 0x42000000 Loading: ################################################################# ################################################################# ################################ 11.6 MiB/s done Bytes transferred = 2371552 (242fe0 hex) => Florian Fainelli (4): net: phy: Add Broadcom BCM53xx switch driver net: designware: Pad small packets net: phy: b53: Add b53_reg read/write commands configs: Update Lamobo_R1 with B53 switch options configs/Lamobo_R1_defconfig | 3 + drivers/net/designware.c | 4 + drivers/net/phy/Kconfig | 14 + drivers/net/phy/Makefile | 1 + drivers/net/phy/b53.c | 767 ++++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy.c | 3 + include/phy.h | 1 + 7 files changed, 793 insertions(+) create mode 100644 drivers/net/phy/b53.c