Show patches with: State = Action Required       |    Archived = No       |   217 patches
« 1 2 3 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
Bundle opal-prd.h from the kernel sources - - - - 0 0 0 2015-09-10 Mathieu Trudel-Lapierre New
HDAT: Add IPMI sensor data under /bmc node - - - - 0 0 0 2017-06-23 Vasant Hegde New
Makefile: Check -Wno-stringop-truncation is supported Makefile: Check -Wno-stringop-truncation is supported - 1 - - 0 0 0 2018-05-30 Joel Stanley New
Skiboot patch for using opal_cec_reboot before OPAL_BOOT_COMPLETE Skiboot patch for using opal_cec_reboot before OPAL_BOOT_COMPLETE - - - - 0 0 0 2017-12-04 Meng Ze Liao New
[01/10] hw/fsp: Decode payload initrd on FSP machines - - - - 0 0 0 2017-06-09 Matt Brown New
[01/13] hw/npu2: Simplify BAR structures Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - 1 - 2 0 0 2018-12-12 Andrew Donnellan New
[02/10] platforms: Add load_done function to firenze - - - - 0 0 0 2017-06-09 Matt Brown New
[02/13] hw/npu2: Merge implementations of BAR accessor functions Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - 1 - 2 0 0 2018-12-12 Andrew Donnellan New
[03/10] core/device: Allow for large DT props - - - - 0 0 0 2017-06-09 Matt Brown New
[03/13] hw/npu2: Move PHY/NTL/GENID BAR assignment to common code Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - - - 2 0 0 2018-12-12 Andrew Donnellan New
[04/10] core: Add generic XZ decoding function - - - - 0 0 0 2017-06-09 Matt Brown New
[04/13] hw/npu2: Simplify npu2_write_bar() Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - 1 - 2 0 0 2018-12-12 Andrew Donnellan New
[05/10] core: Decode payload initrd on openpower - - - - 0 0 0 2017-06-09 Matt Brown New
[05/13] hw/npu2: Don't repopulate NPU devices in NVLink init path Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - - - 2 0 0 2018-12-12 Andrew Donnellan New
[06/10] platform: Add load_done to Firestone platform - - - - 0 0 0 2017-06-09 Matt Brown New
[06/13] hw/npu2: Rework npu2_add_interrupt_map() and skip non-NVLink devices Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - - - 2 0 0 2018-12-12 Andrew Donnellan New
[07/10] platform: Add load_done to Garrison platform - - - - 0 0 0 2017-06-09 Matt Brown New
[07/13] hw/npu2: Make IRQ setup code common Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - - - 2 0 0 2018-12-12 Andrew Donnellan New
[08/10] platform: Add load_done to Habanero platform - - - - 0 0 0 2017-06-09 Matt Brown New
[08/13] platforms/astbmc/witherspoon: Rework NPU presence detection Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - - - 2 0 0 2018-12-12 Andrew Donnellan New
[09/10] platform: Add load_done to Palmetto platform - - - - 0 0 0 2017-06-09 Matt Brown New
[09/13] hw/npu2: Combined NPU brick configuration procedure Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - - - 2 0 0 2018-12-12 Andrew Donnellan New
[1/2] blocklevel_info: Refactor the passing of output data - - - - 0 0 0 2017-04-07 William A. Kennington III New
[1/2] hdata/i2c: Skip unknown device type [1/2] hdata/i2c: Skip unknown device type - - - - 1 0 0 2018-09-21 Vasant Hegde New
[1/2] skiboot.lds.S: Remove boot_tracebuf section Tracing fixes - - - - 2 0 0 2018-12-12 Joel Stanley New
[1/3] core/pci: Add for_each_pci_dev() - - 1 - 0 0 0 2017-08-22 Oliver New
[1/3] hw/test: generalise makefile Boot progress codes to LPC port 80 (and 81 and 82) - - - - 2 0 0 2018-12-13 Stewart Smith New
[1/3] skiboot: Trace IMC Macro definitions skiboot: OPAL support for IMC trace-mode - - 1 - 1 0 0 2018-10-04 Anju T Sudhakar New
[1/3] sparse: Make tree 'constant is so big' warning clean Sparse warning fixes - - - - 1 0 1 2018-12-17 Stewart Smith New
[1/4] core/flash: Allow OPAL flash calls for size equal to flash - - 1 - 0 0 0 2017-06-28 Cyril Bur New
[1/4] phb4: Rework BDFN filtering in phb4_set_pe() [1/4] phb4: Rework BDFN filtering in phb4_set_pe() - - 1 - 2 0 0 2018-11-27 Oliver New
[1/9] Add basic P9 fused core support Initial "big cores" support for POWER9 - - - - 1 0 0 2018-09-27 Benjamin Herrenschmidt Under Review
[10/10] platform: Add load_done to Mambo platform - - - - 0 0 0 2017-06-09 Matt Brown New
[10/13] hw/npu2-opencapi: FIR masking for mixed setups Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - - - 2 0 0 2018-12-12 Andrew Donnellan New
[11/13] hw/npu2: Fix OpenCAPI PE assignment Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - - - 2 0 0 2018-12-12 Andrew Donnellan New
[12/13] hw/npu2: Always check device type when looping through NPU devices Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - - - 2 0 0 2018-12-12 Andrew Donnellan New
[13/13] hw/npu2-common: Allow mixed mode NPU setups Support OpenCAPI and NVLink devices on same NPU on Witherspoon - - - - 2 0 0 2018-12-12 Andrew Donnellan New
[2/2] Remove skiboot 'trace' infrastructure Tracing fixes - - - - 2 0 0 2018-12-12 Joel Stanley New
[2/2] core/hmi: Do not call find_core_checkstop_reason() unconditionally [1/2] hw/npu2: Implement logging HMI actions - - - - 0 0 0 2017-11-30 Balbir Singh New
[2/2] flash: Add dt entries for flash that doesn't need erase - - - - 0 0 0 2017-04-07 William A. Kennington III New
[2/2] hdata/i2c: Add status property to I2C devices [1/2] hdata/i2c: Skip unknown device type - - - - 2 0 0 2018-09-21 Vasant Hegde New
[2/2] libflash: More tests for blocklevel_smart_erase() - - - - 0 0 0 2017-04-20 Cyril Bur New
[2/2] slw: Better instrumentation of SLW timer errors - - - - 0 0 0 2016-09-08 Benjamin Herrenschmidt New
[2/2] timer: Reschedule timer if OPAL receives early timer interrupt [1/2] timer: Move update_timer_expiry call to separate function - - - - 0 0 0 2018-05-03 Vasant Hegde New
[2/3] core/pci: Change capability data type to uint64_t - - - - 0 0 0 2017-05-26 Gavin Shan New
[2/3] npu: Rework finding the paired PCI devices - - - - 0 0 0 2017-08-22 Oliver New
[2/3] skiboot: Enable opal calls to init/start/stop IMC Trace mode skiboot: OPAL support for IMC trace-mode - - 1 - 1 0 0 2018-10-04 Anju T Sudhakar New
[2/3] zz: platform_ocapi can be static Sparse warning fixes 1 - - - 1 0 1 2018-12-17 Stewart Smith New
[2/4] core/flash: Make flash_reserve() and flash_release() use any flash - - 1 - 0 0 0 2017-06-28 Cyril Bur New
[2/4] phb4: Remove pointless NULL checks [1/4] phb4: Rework BDFN filtering in phb4_set_pe() - - 1 - 2 0 0 2018-11-27 Oliver New
[2/9] hdat: Workaround HostBoot bug with fused core Initial "big cores" support for POWER9 - - - - 1 0 0 2018-09-27 Benjamin Herrenschmidt Under Review
[3/3] Allow to create slot for downstream port of any switch Untitled series #80209 - - - - 0 0 0 2018-12-06 Илья Кузнецов New
[3/3] core/pci: Fix access non-existing registers on disabling cmpl timeout - - - - 0 0 0 2017-05-26 Gavin Shan New
[3/3] pci-virt: Add generic slot and cfg functions - - - - 0 0 0 2017-08-22 Oliver New
[3/3] skiboot: Mambo hack to add trace-imc nodes in the device-tree skiboot: OPAL support for IMC trace-mode - - 1 - 2 0 0 2018-10-04 Anju T Sudhakar New
[3/3] zaius: zaius_ocapi can be static Sparse warning fixes 1 - - - 1 0 1 2018-12-17 Stewart Smith New
[3/4] core/flash: Don't hold flash_lock for the entirety of an opal_flash_op() - - 1 - 0 0 0 2017-06-28 Cyril Bur New
[3/4] phb4: Eliminate p->rte_cache [1/4] phb4: Rework BDFN filtering in phb4_set_pe() - - 1 - 2 0 0 2018-11-27 Oliver New
[3/9] xive: Set the fused core mode properly Initial "big cores" support for POWER9 - - - - 1 0 0 2018-09-27 Benjamin Herrenschmidt Under Review
[4/4] libflash/blocklevel: Backend agnostic blocklevel_erase_async() - - - - 0 0 0 2017-06-28 Cyril Bur New
[4/4] phb4: Eliminate peltv_cache [1/4] phb4: Rework BDFN filtering in phb4_set_pe() - - 1 - 2 0 0 2018-11-27 Oliver New
[4/6] p9/stop_api: Remove unnecessary stores scan build fixes - - - - 0 0 0 2018-05-17 Balbir Singh New
[4/9] chip: Fix pir_to_thread_id for fused cores Initial "big cores" support for POWER9 - - - - 1 0 0 2018-09-27 Benjamin Herrenschmidt Under Review
[5/5] fsi-master: On XSCOM errors, try to reset the PIB2OPB bridge - - - - 0 0 0 2016-09-13 Benjamin Herrenschmidt New
[5/9] cpu: Keep track of the "ec_primary" in big core more Initial "big cores" support for POWER9 - - - - 1 0 0 2018-09-27 Benjamin Herrenschmidt Under Review
[6/9] direct-ctl: Use the EC primary for special wakeups Initial "big cores" support for POWER9 - - - - 1 0 0 2018-09-27 Benjamin Herrenschmidt Under Review
[7/9] p9_stop_api: Only update SCOM restore entry if there is an entry Coverity fixes - 1 - - 0 0 0 2018-03-19 Cyril Bur New
[7/9] slw: Limit fused cores P9 to STOP0/1 Initial "big cores" support for POWER9 - - - - 1 0 0 2018-09-27 Benjamin Herrenschmidt Under Review
[8/9] cpu: Make cpu_get_core_index() return the fused core number Initial "big cores" support for POWER9 - - - - 1 0 0 2018-09-27 Benjamin Herrenschmidt Under Review
[9/9,RFC] dts: Possible FIX for set trip bits Coverity fixes - - - - 0 0 0 2018-03-19 Cyril Bur New
[9/9] imc: Use pir_to_core_id() rather than cpu_get_core_index() Initial "big cores" support for POWER9 - - - - 2 0 0 2018-09-27 Benjamin Herrenschmidt Under Review
[RFC,1/2] SLW: Add new idle device-tree format New device-tree format & Opal based idle save-restore - - - - 0 0 1 2018-08-02 Akshay Adiga New
[RFC,1/2] head: POWER9 initialise MMU registers to boot state for fast-reboot [RFC,1/2] head: POWER9 initialise MMU registers to boot state for fast-reboot - - - - 0 0 0 2017-11-30 Nicholas Piggin New
[RFC,1/3] capp: Add ability to fetch CAPP attribute override values from nvram phb4/capp: Provide user tunable for STQ/DMA engine allocation - - - - 1 0 0 2018-09-09 Vaibhav Jain New
[RFC,1/4] phb4: Rework bdfn filtering in set_pe [RFC,1/4] phb4: Rework bdfn filtering in set_pe - - - - 1 0 0 2018-09-12 Oliver New
[RFC,2/2] SLW : Support spr save-restore using new opal call New device-tree format & Opal based idle save-restore - - - - 0 0 1 2018-08-02 Akshay Adiga New
[RFC,2/2] core/cpu: have opal_reinit_cpus clear MMU registers [RFC,1/2] head: POWER9 initialise MMU registers to boot state for fast-reboot - - - - 0 0 0 2017-11-30 Nicholas Piggin New
[RFC,2/3] Write boot progress to LPC port 80h Boot progress codes to LPC port 80 (and 81 and 82) - - - - 2 0 0 2018-12-13 Stewart Smith New
[RFC,2/3] phb4/capp: Introduce 'stq-buffers' capp attribute override phb4/capp: Provide user tunable for STQ/DMA engine allocation - - - - 0 0 1 2018-09-09 Vaibhav Jain New
[RFC,2/4] phb4: Remove pointless NULL checks [RFC,1/4] phb4: Rework bdfn filtering in set_pe - - - - 1 0 0 2018-09-12 Oliver New
[RFC,3/3] Write boot progress to LPC ports 81 and 82 Boot progress codes to LPC port 80 (and 81 and 82) - - - - 2 0 0 2018-12-13 Stewart Smith New
[RFC,3/3] phb4/capp: Introduce 'dma-engines' capp attribute override phb4/capp: Provide user tunable for STQ/DMA engine allocation - - - - 0 0 1 2018-09-09 Vaibhav Jain New
[RFC,3/4] hw/phb4: Eliminate p->rte_cache [RFC,1/4] phb4: Rework bdfn filtering in set_pe - - - - 1 0 0 2018-09-12 Oliver New
[RFC,3/7] asm/head: move unnecessary code out of head virtual memory patches - - - - 1 0 0 2018-09-21 Nicholas Piggin New
[RFC,4/4] phb4: Eliminate peltv_cache [RFC,1/4] phb4: Rework bdfn filtering in set_pe - - - - 2 0 0 2018-09-12 Oliver New
[RFC,4/7] asm/head: use HSRR exception registers in FIXUP_ENDIAN virtual memory patches - - - - 1 0 0 2018-09-21 Nicholas Piggin New
[RFC,5/7] core/exceptions: save current MSR in exception frame virtual memory patches - - - - 1 0 0 2018-09-21 Nicholas Piggin New
[RFC,6/7] asm/head: provide asm support for interrupts to be returned from virtual memory patches - - - - 1 0 0 2018-09-21 Nicholas Piggin New
[RFC,7/7] virtual memory for OPAL boot virtual memory patches - - - - 2 0 0 2018-09-21 Nicholas Piggin New
[RFC,RESEND,01/10] libstb/container.h: add stdbool.h and short_types.h headers Initial Implementation of Secure Boot Key Management support - - - - 1 0 0 2018-08-01 Eric Richter New
[RFC,RESEND,02/10] core/flash.c: add SECBOOT read and write support Initial Implementation of Secure Boot Key Management support - - - - 1 0 0 2018-08-01 Eric Richter New
[RFC,RESEND,03/10] opal-api: add values for secboot keystore management Initial Implementation of Secure Boot Key Management support - - - - 1 0 0 2018-08-01 Eric Richter New
[RFC,RESEND,04/10] libstb: initialize and format pnor secboot partition Initial Implementation of Secure Boot Key Management support - - - - 1 0 0 2018-08-01 Eric Richter New
[RFC,RESEND,05/10] keystore: initialize the base keystore structure Initial Implementation of Secure Boot Key Management support - - - - 1 0 0 2018-08-01 Eric Richter New
[RFC,RESEND,06/10] keystore: add opal_get_variable runtime service Initial Implementation of Secure Boot Key Management support - - - - 1 0 0 2018-08-01 Eric Richter New
[RFC,RESEND,07/10] keystore: add opal_set_variable runtime service Initial Implementation of Secure Boot Key Management support - - - - 1 0 0 2018-08-01 Eric Richter New
[RFC,RESEND,08/10] keystore: add opal_get_next_variable runtime service Initial Implementation of Secure Boot Key Management support - - - - 1 0 0 2018-08-01 Eric Richter New
[RFC,RESEND,09/10] keystore: add opal_secboot_commit runtime service Initial Implementation of Secure Boot Key Management support - - - - 1 0 0 2018-08-01 Eric Richter New
[RFC,RESEND,10/10] keystore: add experimental opal_lock_variables runtime service Initial Implementation of Secure Boot Key Management support - - - - 2 0 0 2018-08-01 Eric Richter New
[RFC,v2,1/2] SLW: Add new idle device-tree format New device-tree format and Opal based idle save-restore - - - - 1 0 0 2018-10-15 Akshay Adiga New
« 1 2 3 »