diff mbox series

[4/6] dt-bindings: soc: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema

Message ID 20230209-b4-amlogic-bindings-convert-take2-v1-4-c4fe9049def9@linaro.org
State Handled Elsewhere
Headers show
Series dt-bindings: second batch of dt-schema conversions for Amlogic Meson bindings | expand

Commit Message

Neil Armstrong Feb. 9, 2023, 1:41 p.m. UTC 
Convert the Amlogic Clock Controller bindings to dt-schema.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../bindings/clock/amlogic,gxbb-clkc.txt           | 53 ----------------------
 .../bindings/clock/amlogic,gxbb-clkc.yaml          | 51 +++++++++++++++++++++
 2 files changed, 51 insertions(+), 53 deletions(-)

Comments

Krzysztof Kozlowski Feb. 13, 2023, 11:01 a.m. UTC | #1 
On 09/02/2023 14:41, Neil Armstrong wrote:
> Convert the Amlogic Clock Controller bindings to dt-schema.

Subject prefix - clock, not soc.

> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  .../bindings/clock/amlogic,gxbb-clkc.txt           | 53 ----------------------
>  .../bindings/clock/amlogic,gxbb-clkc.yaml          | 51 +++++++++++++++++++++
>  2 files changed, 51 insertions(+), 53 deletions(-)


> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: xtal
> +
> +  '#clock-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - '#clock-cells'
> +
> +unevaluatedProperties: false

additionalProperties: false

> +
> +examples:
> +  - |
> +    sysctrl: system-controller@0 {
> +        compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
> +        reg = <0 0x400>;

Drop the parent node, not needed here. You could even skip the example
entirely as it is part of your syscon. If you keep example, then without
parent pieces.

> + 
> +        clkc: clock-controller {
> +            compatible = "amlogic,gxbb-clkc";
> +            #clock-cells = <1>;
> +            clocks = <&xtal>;
> +            clock-names = "xtal";
> +        };
> +    };
> 

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
deleted file mode 100644
index 7ccecd5c02c1..000000000000
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ /dev/null
@@ -1,53 +0,0 @@ 
-* Amlogic GXBB Clock and Reset Unit
-
-The Amlogic GXBB clock controller generates and supplies clock to various
-controllers within the SoC.
-
-Required Properties:
-
-- compatible: should be:
-		"amlogic,gxbb-clkc" for GXBB SoC,
-		"amlogic,gxl-clkc" for GXL and GXM SoC,
-		"amlogic,axg-clkc" for AXG SoC.
-		"amlogic,g12a-clkc" for G12A SoC.
-		"amlogic,g12b-clkc" for G12B SoC.
-		"amlogic,sm1-clkc" for SM1 SoC.
-- clocks : list of clock phandle, one for each entry clock-names.
-- clock-names : should contain the following:
-  * "xtal": the platform xtal
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
-used in device tree sources.
-
-Parent node should have the following properties :
-- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or
-              "amlogic,meson-axg-hhi-sysctrl"
-- reg: base address and size of the HHI system control register space.
-
-Example: Clock controller node:
-
-sysctrl: system-controller@0 {
-	compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
-	reg = <0 0 0 0x400>;
-
-	clkc: clock-controller {
-		#clock-cells = <1>;
-		compatible = "amlogic,gxbb-clkc";
-		clocks = <&xtal>;
-		clock-names = "xtal";
-	};
-};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart_AO: serial@c81004c0 {
-		compatible = "amlogic,meson-uart";
-		reg = <0xc81004c0 0x14>;
-		interrupts = <0 90 1>;
-		clocks = <&clkc CLKID_CLK81>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml
new file mode 100644
index 000000000000..412453fc75e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml
@@ -0,0 +1,51 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,gxbb-clkc
+      - amlogic,gxl-clkc
+      - amlogic,axg-clkc
+      - amlogic,g12a-clkc
+      - amlogic,g12b-clkc
+      - amlogic,sm1-clkc
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xtal
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sysctrl: system-controller@0 {
+        compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
+        reg = <0 0x400>;
+ 
+        clkc: clock-controller {
+            compatible = "amlogic,gxbb-clkc";
+            #clock-cells = <1>;
+            clocks = <&xtal>;
+            clock-names = "xtal";
+        };
+    };