diff mbox series

[1/6] dt-bindings: rtc: convert rtc-meson-vrtc.txt to dt-schema

Message ID 20230209-b4-amlogic-bindings-convert-take2-v1-1-c4fe9049def9@linaro.org
State Not Applicable
Headers show
Series dt-bindings: second batch of dt-schema conversions for Amlogic Meson bindings | expand

Commit Message

Neil Armstrong Feb. 9, 2023, 1:41 p.m. UTC 
Convert the Amlogic Virtual RTC bindings to dt-schema.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../bindings/rtc/amlogic,meson-vrtc.yaml           | 42 ++++++++++++++++++++++
 .../devicetree/bindings/rtc/rtc-meson-vrtc.txt     | 22 ------------
 2 files changed, 42 insertions(+), 22 deletions(-)

Comments

Martin Blumenstingl Feb. 11, 2023, 8:10 p.m. UTC | #1 
On Thu, Feb 9, 2023 at 2:41 PM Neil Armstrong <neil.armstrong@linaro.org> wrote:
>
> Convert the Amlogic Virtual RTC bindings to dt-schema.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Krzysztof Kozlowski Feb. 13, 2023, 10:49 a.m. UTC | #2 
On 09/02/2023 14:41, Neil Armstrong wrote:
> Convert the Amlogic Virtual RTC bindings to dt-schema.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
new file mode 100644
index 000000000000..1d5694c08965
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
@@ -0,0 +1,42 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Virtual RTC (VRTC)
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  The interface is 1 register where an alarm time (in seconds) is to be written.
+
+  The alarm register is a simple scratch register shared between the
+  application processors (AP) and the secure co-processor (SCP).
+  When the AP suspends, the SCP will use the value of this register to
+  program an always-on timer before going sleep. When the timer expires,
+  the SCP will wake up and will then wake the AP.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: amlogic,meson-vrtc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    vrtc: rtc@a8 {
+        compatible = "amlogic,meson-vrtc";
+        reg = <0x000a8 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt b/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
deleted file mode 100644
index c014f54a9853..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
+++ /dev/null
@@ -1,22 +0,0 @@ 
-* Amlogic Virtual RTC (VRTC)
-
-This is a Linux interface to an RTC managed by firmware, hence it's
-virtual from a Linux perspective.  The interface is 1 register where
-an alarm time (in seconds) is to be written.
-
-Required properties:
-- compatible: should be "amlogic,meson-vrtc"
-- reg: physical address for the alarm register
-
-The alarm register is a simple scratch register shared between the
-application processors (AP) and the secure co-processor (SCP.)  When
-the AP suspends, the SCP will use the value of this register to
-program an always-on timer before going sleep. When the timer expires,
-the SCP will wake up and will then wake the AP.
-
-Example:
-
-	vrtc: rtc@0a8 {
-		compatible = "amlogic,meson-vrtc";
-		reg = <0x0 0x000a8 0x0 0x4>;
-	};