@@ -817,15 +817,6 @@ config RTC_DRV_RX4581
This driver can also be built as a module. If so the module
will be called rtc-rx4581.
-config RTC_DRV_RX6110
- tristate "Epson RX-6110"
- select REGMAP_SPI
- help
- If you say yes here you will get support for the Epson RX-6610.
-
- This driver can also be built as a module. If so the module
- will be called rtc-rx6110.
-
config RTC_DRV_RS5C348
tristate "Ricoh RS5C348A/B"
help
@@ -936,6 +927,17 @@ config RTC_DRV_RV3029_HWMON
Say Y here if you want to expose temperature sensor data on
rtc-rv3029.
+config RTC_DRV_RX6110
+ tristate "Epson RX-6110"
+ depends on RTC_I2C_AND_SPI
+ select REGMAP_SPI if SPI_MASTER
+ select REGMAP_I2C if I2C
+ help
+ If you say yes here you will get support for the Epson RX-6610.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-rx6110.
+
comment "Platform RTC drivers"
# this 'CMOS' RTC driver is arch dependent because it requires
@@ -16,6 +16,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/spi/spi.h>
+#include <linux/i2c.h>
/* RX-6110 Register definitions */
#define RX6110_REG_SEC 0x10
@@ -310,6 +311,7 @@ static const struct rtc_class_ops rx6110_rtc_ops = {
.set_time = rx6110_set_time,
};
+#ifdef CONFIG_SPI_MASTER
static struct regmap_config regmap_spi_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -318,10 +320,10 @@ static struct regmap_config regmap_spi_config = {
};
/**
- * rx6110_probe - initialize rtc driver
+ * rx6110_spi_probe - initialize rtc driver
* @spi: pointer to spi device
*/
-static int rx6110_probe(struct spi_device *spi)
+static int rx6110_spi_probe(struct spi_device *spi)
{
struct rx6110_data *rx6110;
int err;
@@ -362,11 +364,11 @@ static int rx6110_probe(struct spi_device *spi)
return 0;
}
-static const struct spi_device_id rx6110_id[] = {
+static const struct spi_device_id rx6110_spi_id[] = {
{ "rx6110", 0 },
{ }
};
-MODULE_DEVICE_TABLE(spi, rx6110_id);
+MODULE_DEVICE_TABLE(spi, rx6110_spi_id);
static const struct of_device_id rx6110_spi_of_match[] = {
{ .compatible = "epson,rx6110" },
@@ -374,16 +376,141 @@ static const struct of_device_id rx6110_spi_of_match[] = {
};
MODULE_DEVICE_TABLE(of, rx6110_spi_of_match);
-static struct spi_driver rx6110_driver = {
+static struct spi_driver rx6110_spi_driver = {
.driver = {
.name = RX6110_DRIVER_NAME,
.of_match_table = of_match_ptr(rx6110_spi_of_match),
},
- .probe = rx6110_probe,
- .id_table = rx6110_id,
+ .probe = rx6110_spi_probe,
+ .id_table = rx6110_spi_id,
};
-module_spi_driver(rx6110_driver);
+static int rx6110_spi_register(void)
+{
+ return spi_register_driver(&rx6110_spi_driver);
+}
+
+static void rx6110_spi_unregister(void)
+{
+ spi_unregister_driver(&rx6110_spi_driver);
+}
+#else
+static int rx6110_spi_register(void)
+{
+ return 0;
+}
+
+static void rx6110_spi_unregister(void)
+{
+}
+#endif /* CONFIG_SPI_MASTER */
+
+#ifdef CONFIG_I2C
+static struct regmap_config regmap_i2c_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RX6110_REG_IRQ,
+ .read_flag_mask = 0x80,
+};
+
+static int rx6110_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct rx6110_data *rx6110;
+ int err;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+ | I2C_FUNC_SMBUS_I2C_BLOCK)) {
+ dev_err(&adapter->dev,
+ "doesn't support required functionality\n");
+ return -EIO;
+ }
+
+ rx6110 = devm_kzalloc(&client->dev, sizeof(*rx6110), GFP_KERNEL);
+ if (!rx6110)
+ return -ENOMEM;
+
+ rx6110->regmap = devm_regmap_init_i2c(client, ®map_i2c_config);
+ if (IS_ERR(rx6110->regmap)) {
+ dev_err(&client->dev, "regmap init failed for rtc rx6110\n");
+ return PTR_ERR(rx6110->regmap);
+ }
+
+ i2c_set_clientdata(client, rx6110);
+
+ rx6110->rtc = devm_rtc_device_register(&client->dev,
+ client->name,
+ &rx6110_rtc_ops, THIS_MODULE);
+
+ if (IS_ERR(rx6110->rtc))
+ return PTR_ERR(rx6110->rtc);
+
+ err = rx6110_init(rx6110);
+ if (err)
+ return err;
+
+ rx6110->rtc->max_user_freq = 1;
+
+ return 0;
+}
+
+static const struct i2c_device_id rx6110_i2c_id[] = {
+ { "rx6110", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, rx6110_i2c_id);
+
+static struct i2c_driver rx6110_i2c_driver = {
+ .driver = {
+ .name = RX6110_DRIVER_NAME,
+ },
+ .probe = rx6110_i2c_probe,
+ .id_table = rx6110_i2c_id,
+};
+
+static int rx6110_i2c_register(void)
+{
+ return i2c_add_driver(&rx6110_i2c_driver);
+}
+
+static void rx6110_i2c_unregister(void)
+{
+ i2c_del_driver(&rx6110_i2c_driver);
+}
+#else
+static int rx6110_i2c_register(void)
+{
+ return 0;
+}
+
+static void rx6110_i2c_unregister(void)
+{
+}
+#endif /* CONFIG_I2C */
+
+static int __init rx6110_module_init(void)
+{
+ int ret;
+
+ ret = rx6110_spi_register();
+ if (ret)
+ return ret;
+
+ ret = rx6110_i2c_register();
+ if (ret)
+ rx6110_spi_unregister();
+
+ return ret;
+}
+module_init(rx6110_module_init);
+
+static void __exit rx6110_module_exit(void)
+{
+ rx6110_spi_unregister();
+ rx6110_i2c_unregister();
+}
+module_exit(rx6110_module_exit);
MODULE_AUTHOR("Val Krutov <val.krutov@erd.epson.com>");
MODULE_DESCRIPTION("RX-6110 SA RTC driver");