diff mbox series

[2/2] rtc: rx6110: add ACPI bindings to I2C

Message ID 20201104102629.3422048-3-ch@denx.de
State Superseded
Headers show
Series Adding I2C support to RX6110 RTC | expand

Commit Message

Claudius Heine Nov. 4, 2020, 10:26 a.m. UTC 
From: Johannes Hahn <johannes-hahn@siemens.com>

This allows the RX6110 driver to be automatically assigned to the right
device on the I2C bus.

Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com>
Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
---
 drivers/rtc/rtc-rx6110.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/drivers/rtc/rtc-rx6110.c b/drivers/rtc/rtc-rx6110.c
index ca9f486236d4..6c0c7e5a7065 100644
--- a/drivers/rtc/rtc-rx6110.c
+++ b/drivers/rtc/rtc-rx6110.c
@@ -13,6 +13,7 @@ 
 #include <linux/of_gpio.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
+#include <linux/acpi.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/spi/spi.h>
@@ -455,6 +456,14 @@  static int rx6110_i2c_probe(struct i2c_client *client,
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id rx6110_i2c_acpi_match[] = {
+	{ "RX6110SA", },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, rx6110_i2c_acpi_match);
+#endif
+
 static const struct i2c_device_id rx6110_i2c_id[] = {
 	{ "rx6110", 0 },
 	{ }
@@ -464,6 +473,9 @@  MODULE_DEVICE_TABLE(i2c, rx6110_i2c_id);
 static struct i2c_driver rx6110_i2c_driver = {
 	.driver = {
 		.name = RX6110_DRIVER_NAME,
+#ifdef CONFIG_ACPI
+		.acpi_match_table = ACPI_PTR(rx6110_i2c_acpi_match),
+#endif
 	},
 	.probe		= rx6110_i2c_probe,
 	.id_table	= rx6110_i2c_id,