| Message ID | 20221229152325.32041-7-philmd@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | hw/arm/aspeed_ast10x0: Map more peripherals & few more fixes | expand |
On Thu, Dec 29, 2022 at 04:23:22PM +0100, Philippe Mathieu-Daudé wrote: > Since I don't have access to the datasheet, the relevant > values were found in: > https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi > > Before on Zephyr: > > uart:~$ crypto aes256_cbc_vault > aes256_cbc vault key 1 > [00:00:06.699,000] <inf> hace_global: aspeed_crypto_session_setup > [00:00:06.699,000] <inf> hace_global: data->cmd: 1c2098 > [00:00:06.699,000] <inf> hace_global: crypto_data_src: 93340 > [00:00:06.699,000] <inf> hace_global: crypto_data_dst: 93348 > [00:00:06.699,000] <inf> hace_global: crypto_ctx_base: 93300 > [00:00:06.699,000] <inf> hace_global: crypto_data_len: 80000040 > [00:00:06.699,000] <inf> hace_global: crypto_cmd_reg: 11c2098 > [00:00:09.743,000] <inf> hace_global: HACE_STS: 0 > [00:00:09.743,000] <err> hace_global: HACE poll timeout > [00:00:09.743,000] <err> crypto: CBC mode ENCRYPT - Failed > [00:00:09.743,000] <inf> hace_global: aspeed_crypto_session_free > uart:~$ > > After: > > uart:~$ crypto aes256_cbc_vault > aes256_cbc vault key 1 > Was waiting for: > 6b c1 be e2 2e 40 9f 96 e9 3d 7e 11 73 93 17 2a > ae 2d 8a 57 1e 03 ac 9c 9e b7 6f ac 45 af 8e 51 > 30 c8 1c 46 a3 5c e4 11 e5 fb c1 19 1a 0a 52 ef > f6 9f 24 45 df 4f 9b 17 ad 2b 41 7b e6 6c 37 10 > > But got: > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > [00:00:05.771,000] <inf> hace_global: aspeed_crypto_session_setup > [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2098 > [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 > [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 > [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 > [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 > [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2098 > [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 > [00:00:05.772,000] <inf> crypto: Output length (encryption): 80 > [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_free > [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_setup > [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2018 > [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 > [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 > [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 > [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 > [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2018 > [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 > [00:00:05.772,000] <inf> crypto: Output length (decryption): 64 > [00:00:05.772,000] <err> crypto: CBC mode DECRYPT - Mismatch between plaintext and decrypted cipher text > [00:00:05.774,000] <inf> hace_global: aspeed_crypto_session_free > uart:~$ > > Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Awesome! Reviewed-by: Peter Delevoryas <peter@pjd.dev> > --- > Should we rename HACE 'dram' as 'secram' / 'secure-ram'? Sure, sounds good to me. > --- > hw/arm/aspeed_ast10x0.c | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c > index 21a2e62345..02636705b6 100644 > --- a/hw/arm/aspeed_ast10x0.c > +++ b/hw/arm/aspeed_ast10x0.c > @@ -29,6 +29,7 @@ static const hwaddr aspeed_soc_ast1030_memmap[] = { > [ASPEED_DEV_SPI1] = 0x7E630000, > [ASPEED_DEV_SPI2] = 0x7E640000, > [ASPEED_DEV_UDC] = 0x7E6A2000, > + [ASPEED_DEV_HACE] = 0x7E6D0000, > [ASPEED_DEV_SCU] = 0x7E6E2000, > [ASPEED_DEV_JTAG0] = 0x7E6E4000, > [ASPEED_DEV_JTAG1] = 0x7E6E4100, > @@ -166,6 +167,9 @@ static void aspeed_soc_ast1030_init(Object *obj) > snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname); > object_initialize_child(obj, "gpio", &s->gpio, typename); > > + snprintf(typename, sizeof(typename), "aspeed.hace-%s", socname); > + object_initialize_child(obj, "hace", &s->hace, typename); > + > object_initialize_child(obj, "iomem", &s->iomem, TYPE_UNIMPLEMENTED_DEVICE); > object_initialize_child(obj, "sbc-unimplemented", &s->sbc_unimplemented, > TYPE_UNIMPLEMENTED_DEVICE); > @@ -359,6 +363,17 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp) > } > aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sbc), 0, sc->memmap[ASPEED_DEV_SBC]); > > + /* HACE */ > + object_property_set_link(OBJECT(&s->hace), "dram", OBJECT(&s->secsram), > + &error_abort); > + if (!sysbus_realize(SYS_BUS_DEVICE(&s->hace), errp)) { > + return; > + } > + aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->hace), 0, > + sc->memmap[ASPEED_DEV_HACE]); > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->hace), 0, > + aspeed_soc_get_irq(s, ASPEED_DEV_HACE)); > + > /* Watch dog */ > for (i = 0; i < sc->wdts_num; i++) { > AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]); > -- > 2.38.1 >
On 29/12/22 21:52, Peter Delevoryas wrote: > On Thu, Dec 29, 2022 at 04:23:22PM +0100, Philippe Mathieu-Daudé wrote: >> Since I don't have access to the datasheet, the relevant >> values were found in: >> https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi >> >> Before on Zephyr: >> >> uart:~$ crypto aes256_cbc_vault >> aes256_cbc vault key 1 >> [00:00:06.699,000] <inf> hace_global: aspeed_crypto_session_setup >> [00:00:06.699,000] <inf> hace_global: data->cmd: 1c2098 >> [00:00:06.699,000] <inf> hace_global: crypto_data_src: 93340 >> [00:00:06.699,000] <inf> hace_global: crypto_data_dst: 93348 >> [00:00:06.699,000] <inf> hace_global: crypto_ctx_base: 93300 >> [00:00:06.699,000] <inf> hace_global: crypto_data_len: 80000040 >> [00:00:06.699,000] <inf> hace_global: crypto_cmd_reg: 11c2098 >> [00:00:09.743,000] <inf> hace_global: HACE_STS: 0 >> [00:00:09.743,000] <err> hace_global: HACE poll timeout >> [00:00:09.743,000] <err> crypto: CBC mode ENCRYPT - Failed >> [00:00:09.743,000] <inf> hace_global: aspeed_crypto_session_free >> uart:~$ >> >> After: >> >> uart:~$ crypto aes256_cbc_vault >> aes256_cbc vault key 1 >> Was waiting for: >> 6b c1 be e2 2e 40 9f 96 e9 3d 7e 11 73 93 17 2a >> ae 2d 8a 57 1e 03 ac 9c 9e b7 6f ac 45 af 8e 51 >> 30 c8 1c 46 a3 5c e4 11 e5 fb c1 19 1a 0a 52 ef >> f6 9f 24 45 df 4f 9b 17 ad 2b 41 7b e6 6c 37 10 >> >> But got: >> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> [00:00:05.771,000] <inf> hace_global: aspeed_crypto_session_setup >> [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2098 >> [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 >> [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 >> [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 >> [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 >> [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2098 >> [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 >> [00:00:05.772,000] <inf> crypto: Output length (encryption): 80 >> [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_free >> [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_setup >> [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2018 >> [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 >> [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 >> [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 >> [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 >> [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2018 >> [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 >> [00:00:05.772,000] <inf> crypto: Output length (decryption): 64 >> [00:00:05.772,000] <err> crypto: CBC mode DECRYPT - Mismatch between plaintext and decrypted cipher text >> [00:00:05.774,000] <inf> hace_global: aspeed_crypto_session_free >> uart:~$ >> >> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> > > Awesome! > > Reviewed-by: Peter Delevoryas <peter@pjd.dev> > >> --- >> Should we rename HACE 'dram' as 'secram' / 'secure-ram'? > > Sure, sounds good to me. > >> --- >> hw/arm/aspeed_ast10x0.c | 15 +++++++++++++++ >> 1 file changed, 15 insertions(+) >> >> diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c >> index 21a2e62345..02636705b6 100644 >> --- a/hw/arm/aspeed_ast10x0.c >> +++ b/hw/arm/aspeed_ast10x0.c >> @@ -29,6 +29,7 @@ static const hwaddr aspeed_soc_ast1030_memmap[] = { >> [ASPEED_DEV_SPI1] = 0x7E630000, >> [ASPEED_DEV_SPI2] = 0x7E640000, >> [ASPEED_DEV_UDC] = 0x7E6A2000, >> + [ASPEED_DEV_HACE] = 0x7E6D0000, >> [ASPEED_DEV_SCU] = 0x7E6E2000, >> [ASPEED_DEV_JTAG0] = 0x7E6E4000, >> [ASPEED_DEV_JTAG1] = 0x7E6E4100, >> @@ -166,6 +167,9 @@ static void aspeed_soc_ast1030_init(Object *obj) >> snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname); >> object_initialize_child(obj, "gpio", &s->gpio, typename); >> >> + snprintf(typename, sizeof(typename), "aspeed.hace-%s", socname); >> + object_initialize_child(obj, "hace", &s->hace, typename); >> + >> object_initialize_child(obj, "iomem", &s->iomem, TYPE_UNIMPLEMENTED_DEVICE); >> object_initialize_child(obj, "sbc-unimplemented", &s->sbc_unimplemented, >> TYPE_UNIMPLEMENTED_DEVICE); >> @@ -359,6 +363,17 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp) >> } >> aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sbc), 0, sc->memmap[ASPEED_DEV_SBC]); >> >> + /* HACE */ >> + object_property_set_link(OBJECT(&s->hace), "dram", OBJECT(&s->secsram), We need to link the SRAM here, not the sec-SRAM. Doing so the hash test works: uart:~$ hash test sha256_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS sha384_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS tv[5]:PASS sha512_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS tv[5]:PASS uart:~$ rsa / aes256_cbc tests still fail.
On Fri, Dec 30, 2022 at 09:13:29AM +0100, Philippe Mathieu-Daudé wrote: > On 29/12/22 21:52, Peter Delevoryas wrote: > > On Thu, Dec 29, 2022 at 04:23:22PM +0100, Philippe Mathieu-Daudé wrote: > > > Since I don't have access to the datasheet, the relevant > > > values were found in: > > > https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi > > > > > > Before on Zephyr: > > > > > > uart:~$ crypto aes256_cbc_vault > > > aes256_cbc vault key 1 > > > [00:00:06.699,000] <inf> hace_global: aspeed_crypto_session_setup > > > [00:00:06.699,000] <inf> hace_global: data->cmd: 1c2098 > > > [00:00:06.699,000] <inf> hace_global: crypto_data_src: 93340 > > > [00:00:06.699,000] <inf> hace_global: crypto_data_dst: 93348 > > > [00:00:06.699,000] <inf> hace_global: crypto_ctx_base: 93300 > > > [00:00:06.699,000] <inf> hace_global: crypto_data_len: 80000040 > > > [00:00:06.699,000] <inf> hace_global: crypto_cmd_reg: 11c2098 > > > [00:00:09.743,000] <inf> hace_global: HACE_STS: 0 > > > [00:00:09.743,000] <err> hace_global: HACE poll timeout > > > [00:00:09.743,000] <err> crypto: CBC mode ENCRYPT - Failed > > > [00:00:09.743,000] <inf> hace_global: aspeed_crypto_session_free > > > uart:~$ > > > > > > After: > > > > > > uart:~$ crypto aes256_cbc_vault > > > aes256_cbc vault key 1 > > > Was waiting for: > > > 6b c1 be e2 2e 40 9f 96 e9 3d 7e 11 73 93 17 2a > > > ae 2d 8a 57 1e 03 ac 9c 9e b7 6f ac 45 af 8e 51 > > > 30 c8 1c 46 a3 5c e4 11 e5 fb c1 19 1a 0a 52 ef > > > f6 9f 24 45 df 4f 9b 17 ad 2b 41 7b e6 6c 37 10 > > > > > > But got: > > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > > > > > [00:00:05.771,000] <inf> hace_global: aspeed_crypto_session_setup > > > [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2098 > > > [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 > > > [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 > > > [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 > > > [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 > > > [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2098 > > > [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 > > > [00:00:05.772,000] <inf> crypto: Output length (encryption): 80 > > > [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_free > > > [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_setup > > > [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2018 > > > [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 > > > [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 > > > [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 > > > [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 > > > [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2018 > > > [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 > > > [00:00:05.772,000] <inf> crypto: Output length (decryption): 64 > > > [00:00:05.772,000] <err> crypto: CBC mode DECRYPT - Mismatch between plaintext and decrypted cipher text > > > [00:00:05.774,000] <inf> hace_global: aspeed_crypto_session_free > > > uart:~$ > > > > > > Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> > > > > Awesome! > > > > Reviewed-by: Peter Delevoryas <peter@pjd.dev> > > > > > --- > > > Should we rename HACE 'dram' as 'secram' / 'secure-ram'? > > > > Sure, sounds good to me. > > > > > --- > > > hw/arm/aspeed_ast10x0.c | 15 +++++++++++++++ > > > 1 file changed, 15 insertions(+) > > > > > > diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c > > > index 21a2e62345..02636705b6 100644 > > > --- a/hw/arm/aspeed_ast10x0.c > > > +++ b/hw/arm/aspeed_ast10x0.c > > > @@ -29,6 +29,7 @@ static const hwaddr aspeed_soc_ast1030_memmap[] = { > > > [ASPEED_DEV_SPI1] = 0x7E630000, > > > [ASPEED_DEV_SPI2] = 0x7E640000, > > > [ASPEED_DEV_UDC] = 0x7E6A2000, > > > + [ASPEED_DEV_HACE] = 0x7E6D0000, > > > [ASPEED_DEV_SCU] = 0x7E6E2000, > > > [ASPEED_DEV_JTAG0] = 0x7E6E4000, > > > [ASPEED_DEV_JTAG1] = 0x7E6E4100, > > > @@ -166,6 +167,9 @@ static void aspeed_soc_ast1030_init(Object *obj) > > > snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname); > > > object_initialize_child(obj, "gpio", &s->gpio, typename); > > > + snprintf(typename, sizeof(typename), "aspeed.hace-%s", socname); > > > + object_initialize_child(obj, "hace", &s->hace, typename); > > > + > > > object_initialize_child(obj, "iomem", &s->iomem, TYPE_UNIMPLEMENTED_DEVICE); > > > object_initialize_child(obj, "sbc-unimplemented", &s->sbc_unimplemented, > > > TYPE_UNIMPLEMENTED_DEVICE); > > > @@ -359,6 +363,17 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp) > > > } > > > aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sbc), 0, sc->memmap[ASPEED_DEV_SBC]); > > > + /* HACE */ > > > + object_property_set_link(OBJECT(&s->hace), "dram", OBJECT(&s->secsram), > > We need to link the SRAM here, not the sec-SRAM. Nice catch 😅 > > Doing so the hash test works: > > uart:~$ hash test > sha256_test > tv[0]:PASS > tv[1]:PASS > tv[2]:PASS > tv[3]:PASS > tv[4]:PASS > sha384_test > tv[0]:PASS > tv[1]:PASS > tv[2]:PASS > tv[3]:PASS > tv[4]:PASS > tv[5]:PASS > sha512_test > tv[0]:PASS > tv[1]:PASS > tv[2]:PASS > tv[3]:PASS > tv[4]:PASS > tv[5]:PASS > uart:~$ > > rsa / aes256_cbc tests still fail. > Oh nice!!
diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c index 21a2e62345..02636705b6 100644 --- a/hw/arm/aspeed_ast10x0.c +++ b/hw/arm/aspeed_ast10x0.c @@ -29,6 +29,7 @@ static const hwaddr aspeed_soc_ast1030_memmap[] = { [ASPEED_DEV_SPI1] = 0x7E630000, [ASPEED_DEV_SPI2] = 0x7E640000, [ASPEED_DEV_UDC] = 0x7E6A2000, + [ASPEED_DEV_HACE] = 0x7E6D0000, [ASPEED_DEV_SCU] = 0x7E6E2000, [ASPEED_DEV_JTAG0] = 0x7E6E4000, [ASPEED_DEV_JTAG1] = 0x7E6E4100, @@ -166,6 +167,9 @@ static void aspeed_soc_ast1030_init(Object *obj) snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname); object_initialize_child(obj, "gpio", &s->gpio, typename); + snprintf(typename, sizeof(typename), "aspeed.hace-%s", socname); + object_initialize_child(obj, "hace", &s->hace, typename); + object_initialize_child(obj, "iomem", &s->iomem, TYPE_UNIMPLEMENTED_DEVICE); object_initialize_child(obj, "sbc-unimplemented", &s->sbc_unimplemented, TYPE_UNIMPLEMENTED_DEVICE); @@ -359,6 +363,17 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp) } aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sbc), 0, sc->memmap[ASPEED_DEV_SBC]); + /* HACE */ + object_property_set_link(OBJECT(&s->hace), "dram", OBJECT(&s->secsram), + &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->hace), errp)) { + return; + } + aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->hace), 0, + sc->memmap[ASPEED_DEV_HACE]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->hace), 0, + aspeed_soc_get_irq(s, ASPEED_DEV_HACE)); + /* Watch dog */ for (i = 0; i < sc->wdts_num; i++) { AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]);
Since I don't have access to the datasheet, the relevant values were found in: https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Before on Zephyr: uart:~$ crypto aes256_cbc_vault aes256_cbc vault key 1 [00:00:06.699,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:06.699,000] <inf> hace_global: data->cmd: 1c2098 [00:00:06.699,000] <inf> hace_global: crypto_data_src: 93340 [00:00:06.699,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:06.699,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:06.699,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:06.699,000] <inf> hace_global: crypto_cmd_reg: 11c2098 [00:00:09.743,000] <inf> hace_global: HACE_STS: 0 [00:00:09.743,000] <err> hace_global: HACE poll timeout [00:00:09.743,000] <err> crypto: CBC mode ENCRYPT - Failed [00:00:09.743,000] <inf> hace_global: aspeed_crypto_session_free uart:~$ After: uart:~$ crypto aes256_cbc_vault aes256_cbc vault key 1 Was waiting for: 6b c1 be e2 2e 40 9f 96 e9 3d 7e 11 73 93 17 2a ae 2d 8a 57 1e 03 ac 9c 9e b7 6f ac 45 af 8e 51 30 c8 1c 46 a3 5c e4 11 e5 fb c1 19 1a 0a 52 ef f6 9f 24 45 df 4f 9b 17 ad 2b 41 7b e6 6c 37 10 But got: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [00:00:05.771,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2098 [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2098 [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 [00:00:05.772,000] <inf> crypto: Output length (encryption): 80 [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_free [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2018 [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2018 [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 [00:00:05.772,000] <inf> crypto: Output length (decryption): 64 [00:00:05.772,000] <err> crypto: CBC mode DECRYPT - Mismatch between plaintext and decrypted cipher text [00:00:05.774,000] <inf> hace_global: aspeed_crypto_session_free uart:~$ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- Should we rename HACE 'dram' as 'secram' / 'secure-ram'? --- hw/arm/aspeed_ast10x0.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)