Show patches with: Archived = No       |   3078 patches
« 1 2 ... 28 29 30 31 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[3/3] ARM: dts: aspeed: Enable g220a uart route Untitled series #219708 - - - - --- 2020-12-10 John Wang New
[2/3] ARM: dts: aspeed: Add uart-routing node Untitled series #219708 - - - - --- 2020-12-10 John Wang New
gpio: aspeed: Lock GPIO pin used as IRQ gpio: aspeed: Lock GPIO pin used as IRQ - - - - --- 2020-12-10 Troy Lee New
Adding chips TCA9554 and PCA9552, to expose the presence Adding chips TCA9554 and PCA9552, to expose the presence - - - - --- 2020-12-10 Alpana Kumari New
[4/4] hwmon: Support Aspeed AST2600 PWM/Fan tachometer hwmon: aspeed2600-pwm-tacho: Add driver support - - - - --- 2020-12-09 Troy Lee New
[3/4] hwmon: Add Aspeed AST2600 support hwmon: aspeed2600-pwm-tacho: Add driver support - - - - --- 2020-12-09 Troy Lee New
[2/4] ARM: dts: aspeed: Add Aspeed AST2600 PWM/Fan node in devicetree hwmon: aspeed2600-pwm-tacho: Add driver support - - - - --- 2020-12-09 Troy Lee New
[1/4] dt-bindings: hwmon: Add Aspeed AST2600 PWM/Fan hwmon: aspeed2600-pwm-tacho: Add driver support - - - - --- 2020-12-09 Troy Lee New
[2/2] media: aspeed: fix clock handling logic Fix kernel panic issues caused by AST2500 Video Engine - 1 2 - --- 2020-12-07 Jae Hyun Yoo New
[1/2] clk: ast2600: fix reset settings for eclk and vclk Fix kernel panic issues caused by AST2500 Video Engine - 1 1 - --- 2020-12-07 Jae Hyun Yoo New
[linux,hwmon-next,v4,3/3] dt-bindings: (hwmon/sbtsi_tmep) Add SB-TSI hwmon driver bindings SB-TSI hwmon driver v4 - - 1 - --- 2020-12-02 Kun Yi New
[linux,hwmon-next,v4,2/3] hwmon: (sbtsi) Add documentation SB-TSI hwmon driver v4 - - - - --- 2020-12-02 Kun Yi New
[linux,hwmon-next,v4,1/3] hwmon: (sbtsi) Add basic support for SB-TSI sensors SB-TSI hwmon driver v4 - - - - --- 2020-12-02 Kun Yi New
[v2,2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC ARM: dts: aspeed: Add Ampere Mt. Jade BMC device - - 1 - --- 2020-11-30 Quan Nguyen New
[v2,1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com ARM: dts: aspeed: Add Ampere Mt. Jade BMC device - - 3 - --- 2020-11-30 Quan Nguyen New
[2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC ARM: dts: aspeed: Add Ampere Mt. Jade BMC device - - - - --- 2020-11-27 Quan Nguyen New
[1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com ARM: dts: aspeed: Add Ampere Mt. Jade BMC device - - - - --- 2020-11-27 Quan Nguyen New
pinctrl: aspeed: Fix GPIO requests on pass-through banks pinctrl: aspeed: Fix GPIO requests on pass-through banks - 1 1 1 --- 2020-11-26 Andrew Jeffery New
[linux,dev-5.8] ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans [linux,dev-5.8] ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans - - 1 - --- 2020-11-25 Matthew Barth New
[linux,dev-5.8] ARM: dts: aspeed: rainier-4u: Update fan config [linux,dev-5.8] ARM: dts: aspeed: rainier-4u: Update fan config - - 1 - --- 2020-11-24 Matthew Barth New
[linux,dev-5.8] ARM: dts: aspeed: rainier: Set MAX31785 config [linux,dev-5.8] ARM: dts: aspeed: rainier: Set MAX31785 config - - 1 - --- 2020-11-24 Matthew Barth New
[v5,2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - 1 - --- 2020-11-23 Tao Ren New
[v5,1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-23 Tao Ren New
[v4,2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - 1 - --- 2020-11-23 Tao Ren New
[v4,1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-23 Tao Ren New
[v3,2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - 1 - --- 2020-11-19 Tao Ren New
[v3,1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-19 Tao Ren New
[v1] ARM: dts: add Nuvoton NPCM730 device tree [v1] ARM: dts: add Nuvoton NPCM730 device tree - - 1 - --- 2020-11-19 Tomer Maimon New
[v2,2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-18 Tao Ren New
[v2,1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-18 Tao Ren New
[linux,dev-5.8] soc: aspeed: Remove misc control interface driver [linux,dev-5.8] soc: aspeed: Remove misc control interface driver - - - - --- 2020-11-17 Joel Stanley New
[2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-17 Tao Ren New
[1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-17 Tao Ren New
[v5,linux,dev-5.8] Fii Kudo project device tree file [v5,linux,dev-5.8] Fii Kudo project device tree file - - 2 - --- 2020-11-16 Lancelot Kao New
QEMU - No 'PCI' bus found for device 'virtio-rng-pci' QEMU - No 'PCI' bus found for device 'virtio-rng-pci' - - - - --- 2020-11-16 Ambrozewicz, Adrian New
[v4,linux,dev-5.8] Fii Kudo project device tree file [v4,linux,dev-5.8] Fii Kudo project device tree file - - 1 - --- 2020-11-12 Lancelot Kao New
[v3,linux,dev-5.8] Fii Kudo project device tree file Add device tree for the Kudo BMC. Kudo is an A… [v3,linux,dev-5.8] Fii Kudo project device tree file Add device tree for the Kudo BMC. Kudo is an A… - - - - --- 2020-11-12 Lancelot Kao New
[4/4] ARM: dts: aspeed: Add Facebook Galaxy100 (AST2400) BMC ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[3/4] ARM: dts: aspeed: wedge100: Use common dtsi ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[2/4] ARM: dts: aspeed: wedge40: Use common dtsi ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[1/4] ARM: dts: aspeed: Common dtsi for Facebook AST2400 Network BMCs ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[linux,dev-5.8,3/3] ARM: dts: aspeed: amd-ethanolx: Add GPIO line names [linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - - - --- 2020-11-11 Konstantin Aladyshev New
[linux,dev-5.8,2/3] ARM: dts: aspeed: amd-ethanolx: Enable devices for the iKVM functionality [linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - 2 - --- 2020-11-11 Konstantin Aladyshev New
[linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 [linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - 2 - --- 2020-11-11 Konstantin Aladyshev New
[v2,linux,dev-5.8] Fii Kudo project device tree file [v2,linux,dev-5.8] Fii Kudo project device tree file - - - - --- 2020-11-10 Lancelot Kao New
[linux,dev-5.8] spi: fsi: Fix transfer returning without finalizing message [linux,dev-5.8] spi: fsi: Fix transfer returning without finalizing message - 1 - - --- 2020-11-10 Eddie James New
ARM: dts: aspeed: minipack: Fixup I2C tree ARM: dts: aspeed: minipack: Fixup I2C tree - - 1 - --- 2020-11-10 Tao Ren New
ARM: dts: aspeed: wedge400: Fix FMC flash0 layout ARM: dts: aspeed: wedge400: Fix FMC flash0 layout - - 1 - --- 2020-11-10 Tao Ren New
[u-boot,v2019.04-aspeed-openbmc,v3,3/3] configs: Add AST2600 SPL eMMC configuration Aspeed: Support eMMC boot - - - - --- 2020-11-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v3,2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Aspeed: Support eMMC boot - - 1 - --- 2020-11-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v3,1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and pa… Aspeed: Support eMMC boot - - 1 - --- 2020-11-05 Eddie James New
[linux,dev-5.8] Fii Kudo project device tree file [linux,dev-5.8] Fii Kudo project device tree file - - - - --- 2020-11-04 Lancelot Kao New
[linux,dev-5.8] ARM: dts: Aspeed: Rainier: Mark FSI SPI controllers as restricted [linux,dev-5.8] ARM: dts: Aspeed: Rainier: Mark FSI SPI controllers as restricted - - - - --- 2020-11-02 Eddie James New
[v3,3/3] dt-bindings: net: ftgmac100: describe phy-handle and MDIO add ast2400/2500 phy-handle support - - 1 - --- 2020-10-30 Ivan Mikhaylov New
[v3,2/3] net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500 add ast2400/2500 phy-handle support - - 1 - --- 2020-10-30 Ivan Mikhaylov New
[v3,1/3] net: ftgmac100: move phy connect out from ftgmac100_setup_mdio add ast2400/2500 phy-handle support - - 1 - --- 2020-10-30 Ivan Mikhaylov New
[v2] pinctrl: aspeed: Fix GPI only function problem. [v2] pinctrl: aspeed: Fix GPI only function problem. - 1 1 - --- 2020-10-30 Billy Tsai New
[U-Boot,v2019.04-aspeed-openbmc,v2,3/3] configs: Add AST2600 SPL eMMC configuration Aspeed: Support eMMC boot - - - - --- 2020-10-29 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,v2,2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Aspeed: Support eMMC boot - - 1 - --- 2020-10-29 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,v2,1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and pa… Aspeed: Support eMMC boot - - 1 - --- 2020-10-29 Eddie James New
[linux,dev-5.8,v3] ARM: dts: Aspeed: Rainier: Add 4U device-tree [linux,dev-5.8,v3] ARM: dts: Aspeed: Rainier: Add 4U device-tree - - 1 - --- 2020-10-28 Eddie James New
[v2,2/2] net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500 add ast2400/2500 phy-handle support - - - - --- 2020-10-27 Ivan Mikhaylov New
[v2,1/2] net: ftgmac100: move phy connect out from ftgmac100_setup_mdio add ast2400/2500 phy-handle support - - 1 - --- 2020-10-27 Ivan Mikhaylov New
pinctrl: aspeed: Fix GPI only function problem. pinctrl: aspeed: Fix GPI only function problem. - 1 - - --- 2020-10-27 Billy Tsai New
[linux,dev-5.8] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 [linux,dev-5.8] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - - - --- 2020-10-24 Konstantin Aladyshev New
ARM: dts: Fix label address for 64MiB OpenBMC flash layout ARM: dts: Fix label address for 64MiB OpenBMC flash layout 1 - 1 - --- 2020-10-22 George Liu New
peci: Set "Wake On PECI" mode when required peci: Set "Wake On PECI" mode when required - - - - --- 2020-10-21 Andrei Kartashev New
[U-Boot,v2019.04-aspeed-openbmc,3/3] configs: Add AST2600 SPL eMMC configuration Aspeed: Support eMMC boot - - - - --- 2020-09-28 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Aspeed: Support eMMC boot - - 1 - --- 2020-09-28 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and param… Aspeed: Support eMMC boot - - 1 - --- 2020-09-28 Eddie James New
[linux,dev-5.8,v2] ARM: dts: Aspeed: Rainier: Add 4U device-tree [linux,dev-5.8,v2] ARM: dts: Aspeed: Rainier: Add 4U device-tree - - - - --- 2020-09-23 Eddie James New
[linux,dev-5.8] ARM: dts: Aspeed: Rainier: Rename 2U and add 4U [linux,dev-5.8] ARM: dts: Aspeed: Rainier: Rename 2U and add 4U - - - - --- 2020-09-18 Eddie James New
[linux,dev-5.4,v1] ARM: dts: aspeed: Add Mowgli BMC platform [linux,dev-5.4,v1] ARM: dts: aspeed: Add Mowgli BMC platform - - - - --- 2020-09-10 Ben Pai New
[linux,dev-5.8] ARM: dts: rainier: Disable internal pull-downs on eMMC pins [linux,dev-5.8] ARM: dts: rainier: Disable internal pull-downs on eMMC pins - - - - --- 2020-09-09 Andrew Jeffery New
[linux,dev-5.8,3/3] ucd9000: Add a throttle delay attribute in debugfs i2c: Introduce transfer throttling - - - - --- 2020-09-02 Andrew Jeffery New
[linux,dev-5.8,2/3] pmbus: (ucd9000) Throttle SMBus transfers to avoid poor behaviour i2c: Introduce transfer throttling - - - - --- 2020-09-02 Andrew Jeffery New
[linux,dev-5.8,1/3] i2c: Allow throttling of transfers to client devices i2c: Introduce transfer throttling - - - - --- 2020-09-02 Andrew Jeffery New
[linux,dev-5.8,v2] ARM: dts: aspeed: rainier: Add I2C buses for NVMe use [linux,dev-5.8,v2] ARM: dts: aspeed: rainier: Add I2C buses for NVMe use - - - - --- 2020-09-01 Jet Li New
[u-boot,v2019.04-aspeed-openbmc,5/5] configs: AST2600 Openbmc: Update config for eMMC boot AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,4/5] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and param… AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,3/5] mmc: Add support for devicetree parameters for Aspeed controll… AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,2/5] spl: mmc: Switch partition error to debug AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,1/5] ARM: Aspeed: AST2600: Support booting from eMMC AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[linux,dev-5.8,3/3] pmbus: (core) Add a one-shot retry in pmbus_set_page() MAX31785 Fan Controller Work-arounds - - - - --- 2020-08-27 Andrew Jeffery New
[linux,dev-5.8,2/3] pmbus: (max31785) Add a local pmbus_set_page() implementation MAX31785 Fan Controller Work-arounds - - - - --- 2020-08-27 Andrew Jeffery New
[linux,dev-5.8,1/3] pmbus: (max31785) Retry enabling fans after writing MFR_FAN_CONFIG MAX31785 Fan Controller Work-arounds - - - - --- 2020-08-27 Andrew Jeffery New
[linux,dev-5.8,4/4] ARM: dts: Aspeed: Rainier: Set FSI clock frequency AST2600 clock and FSI: Add APLL to control FSI clock - - - - --- 2020-08-24 Eddie James New
[linux,dev-5.8,3/4] fsi: Aspeed master: Set clock frequency from devicetree AST2600 clock and FSI: Add APLL to control FSI clock - - 1 - --- 2020-08-24 Eddie James New
[linux,dev-5.8,2/4] dt-bindings: fsi: Aspeed master: Add clock-frequency property AST2600 clock and FSI: Add APLL to control FSI clock - - - - --- 2020-08-24 Eddie James New
[linux,dev-5.8,1/4] clk: ast2600: Add functionality to the APLL clock AST2600 clock and FSI: Add APLL to control FSI clock - - - - --- 2020-08-24 Eddie James New
[linux,dev-5.8] mtd: spi-nor: sfdp: Revert "default to addr_width of 3 for configurable widths" [linux,dev-5.8] mtd: spi-nor: sfdp: Revert "default to addr_width of 3 for configurable widths" - 1 - 1 --- 2020-08-12 Joel Stanley New
[u-boot,v2016.07-aspeed-openbmc] drivers: ftgmac100: use hardware MAC by default [u-boot,v2016.07-aspeed-openbmc] drivers: ftgmac100: use hardware MAC by default - - - - --- 2020-08-10 Alexander A. Filippov New
[linux,dev-5.7,2/2] fsi: scom: Handle FSI2PIB timeout fsi: scom: FSI2PIB error recovery - - - - --- 2020-07-29 Joel Stanley New
[linux,dev-5.7,1/2] fsi: scom: Add dev_dbg in put_scom and get_scom paths fsi: scom: FSI2PIB error recovery - - - - --- 2020-07-29 Joel Stanley New
[linux,dev-5.7,1/2] rainier: Add leds that are off 9551 on Operator Panel [linux,dev-5.7,1/2] rainier: Add leds that are off 9551 on Operator Panel - - 1 - --- 2020-07-29 vishwanatha subbanna New
[linux,dev-5.7,2/2] rainier: Add LEDs that are controlled by ASPEED [linux,dev-5.7,1/2] rainier: Add leds that are off 9551 on Operator Panel - - 1 - --- 2020-07-29 vishwanatha subbanna New
[linux,dev-5.7,2/2] rainier: Add LEDs that are controlled by ASPEED Untitled series #193066 - - 1 - --- 2020-07-29 vishwanatha subbanna New
[2/2] rainier: Add LEDs that are controlled by ASPEED [1/2] rainier: Add leds that are off 9551 on Operator Panel - - 1 - --- 2020-07-27 vishwanatha subbanna New
[1/2] rainier: Add leds that are off 9551 on Operator Panel [1/2] rainier: Add leds that are off 9551 on Operator Panel - - 1 - --- 2020-07-27 vishwanatha subbanna New
[linux,dev-5.4,1/3] fsi: aspeed: Support CFAM reset GPIO fsi: aspeed: CFAM reset support - - 1 - --- 2020-07-24 Joel Stanley New
« 1 2 ... 28 29 30 31 »