diff mbox series

[net-next,09/11] net: phy: marvell: use existing clause 37 definitions

Message ID E1ihD4g-0001zI-0E@rmk-PC.armlinux.org.uk
State Accepted
Delegated to: David Miller
Headers show
Series phylib consolidation | expand

Commit Message

Russell King (Oracle) Dec. 17, 2019, 1:39 p.m. UTC 
Use existing clause 37 advertising/link partner definitions rather than
private ones for the advertisement registers.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/marvell.c | 26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)

Comments

Andrew Lunn Dec. 17, 2019, 3:47 p.m. UTC | #1 
On Tue, Dec 17, 2019 at 01:39:42PM +0000, Russell King wrote:
> Use existing clause 37 advertising/link partner definitions rather than
> private ones for the advertisement registers.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Florian Fainelli Dec. 17, 2019, 5:33 p.m. UTC | #2 
On 12/17/19 5:39 AM, Russell King wrote:
> Use existing clause 37 advertising/link partner definitions rather than
> private ones for the advertisement registers.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
diff mbox series

Patch

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index b25eee9314a7..2d30653ddf4b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -156,18 +156,9 @@ 
 #define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII	0x1	/* SGMII to copper */
 #define MII_88E1510_GEN_CTRL_REG_1_RESET	0x8000	/* Soft reset */
 
-#define LPA_FIBER_1000HALF	0x40
-#define LPA_FIBER_1000FULL	0x20
-
 #define LPA_PAUSE_FIBER		0x180
 #define LPA_PAUSE_ASYM_FIBER	0x100
 
-#define ADVERTISE_FIBER_1000HALF	0x40
-#define ADVERTISE_FIBER_1000FULL	0x20
-
-#define ADVERTISE_PAUSE_FIBER		0x180
-#define ADVERTISE_PAUSE_ASYM_FIBER	0x100
-
 #define NB_FIBER_STATS	1
 
 MODULE_DESCRIPTION("Marvell PHY driver");
@@ -507,16 +498,15 @@  static inline u32 linkmode_adv_to_fiber_adv_t(unsigned long *advertise)
 	u32 result = 0;
 
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, advertise))
-		result |= ADVERTISE_FIBER_1000HALF;
+		result |= ADVERTISE_1000XHALF;
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, advertise))
-		result |= ADVERTISE_FIBER_1000FULL;
+		result |= ADVERTISE_1000XFULL;
 
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertise) &&
 	    linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertise))
-		result |= LPA_PAUSE_ASYM_FIBER;
+		result |= ADVERTISE_1000XPSE_ASYM;
 	else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertise))
-		result |= (ADVERTISE_PAUSE_FIBER
-			   & (~ADVERTISE_PAUSE_ASYM_FIBER));
+		result |= ADVERTISE_1000XPAUSE;
 
 	return result;
 }
@@ -549,8 +539,8 @@  static int marvell_config_aneg_fiber(struct phy_device *phydev)
 		return adv;
 
 	oldadv = adv;
-	adv &= ~(ADVERTISE_FIBER_1000HALF | ADVERTISE_FIBER_1000FULL
-		| LPA_PAUSE_FIBER);
+	adv &= ~(ADVERTISE_1000XHALF | ADVERTISE_1000XFULL |
+		 ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM);
 	adv |= linkmode_adv_to_fiber_adv_t(phydev->advertising);
 
 	if (adv != oldadv) {
@@ -1177,10 +1167,10 @@  static int m88e6390_config_aneg(struct phy_device *phydev)
 static void fiber_lpa_mod_linkmode_lpa_t(unsigned long *advertising, u32 lpa)
 {
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-			 advertising, lpa & LPA_FIBER_1000HALF);
+			 advertising, lpa & LPA_1000XHALF);
 
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-			 advertising, lpa & LPA_FIBER_1000FULL);
+			 advertising, lpa & LPA_1000XFULL);
 }
 
 static int marvell_read_status_page_an(struct phy_device *phydev,