diff mbox series

[net-next,05/11] net: phy: marvell: rearrange to use genphy_read_lpa()

Message ID E1ihD4L-0001ym-FK@rmk-PC.armlinux.org.uk
State Accepted
Delegated to: David Miller
Headers show
Series phylib consolidation | expand

Commit Message

Russell King (Oracle) Dec. 17, 2019, 1:39 p.m. UTC 
Rearrange the Marvell PHY driver to use genphy_read_lpa() rather than
open-coding this functionality.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/marvell.c | 66 +++++++++++++++++++--------------------
 1 file changed, 32 insertions(+), 34 deletions(-)

Comments

Andrew Lunn Dec. 17, 2019, 3:44 p.m. UTC | #1 
On Tue, Dec 17, 2019 at 01:39:21PM +0000, Russell King wrote:
> Rearrange the Marvell PHY driver to use genphy_read_lpa() rather than
> open-coding this functionality.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Florian Fainelli Dec. 17, 2019, 5:30 p.m. UTC | #2 
On 12/17/19 5:39 AM, Russell King wrote:
> Rearrange the Marvell PHY driver to use genphy_read_lpa() rather than
> open-coding this functionality.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
diff mbox series

Patch

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index fa0ec116960e..18080d9c0cd9 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1219,52 +1219,30 @@  static int marvell_read_status_page_an(struct phy_device *phydev,
 {
 	int status;
 	int lpa;
-	int lpagb;
+	int err;
 
 	status = phy_read(phydev, MII_M1011_PHY_STATUS);
 	if (status < 0)
 		return status;
 
-	lpa = phy_read(phydev, MII_LPA);
-	if (lpa < 0)
-		return lpa;
-
-	lpagb = phy_read(phydev, MII_STAT1000);
-	if (lpagb < 0)
-		return lpagb;
-
-	if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
-		phydev->duplex = DUPLEX_FULL;
-	else
-		phydev->duplex = DUPLEX_HALF;
-
-	status = status & MII_M1011_PHY_STATUS_SPD_MASK;
-	phydev->pause = 0;
-	phydev->asym_pause = 0;
-
-	switch (status) {
-	case MII_M1011_PHY_STATUS_1000:
-		phydev->speed = SPEED_1000;
-		break;
-
-	case MII_M1011_PHY_STATUS_100:
-		phydev->speed = SPEED_100;
-		break;
-
-	default:
-		phydev->speed = SPEED_10;
-		break;
-	}
-
 	if (!fiber) {
-		mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, lpa);
-		mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, lpagb);
+		err = genphy_read_lpa(phydev);
+		if (err < 0)
+			return err;
 
+		phydev->pause = 0;
+		phydev->asym_pause = 0;
 		phy_resolve_aneg_pause(phydev);
 	} else {
+		lpa = phy_read(phydev, MII_LPA);
+		if (lpa < 0)
+			return lpa;
+
 		/* The fiber link is only 1000M capable */
 		fiber_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
 
+		phydev->pause = 0;
+		phydev->asym_pause = 0;
 		if (phydev->duplex == DUPLEX_FULL) {
 			if (!(lpa & LPA_PAUSE_FIBER)) {
 				phydev->pause = 0;
@@ -1278,6 +1256,26 @@  static int marvell_read_status_page_an(struct phy_device *phydev,
 			}
 		}
 	}
+
+	if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
+		phydev->duplex = DUPLEX_FULL;
+	else
+		phydev->duplex = DUPLEX_HALF;
+
+	switch (status & MII_M1011_PHY_STATUS_SPD_MASK) {
+	case MII_M1011_PHY_STATUS_1000:
+		phydev->speed = SPEED_1000;
+		break;
+
+	case MII_M1011_PHY_STATUS_100:
+		phydev->speed = SPEED_100;
+		break;
+
+	default:
+		phydev->speed = SPEED_10;
+		break;
+	}
+
 	return 0;
 }