diff mbox series

[net-next,06/11] net: phy: mdio-gpio: Remove support for IRQs in platform data

Message ID 1524092579-15625-7-git-send-email-andrew@lunn.ch
State Accepted, archived
Delegated to: David Miller
Headers show
Series Modernize mdio-gpio | expand

Commit Message

Andrew Lunn April 18, 2018, 11:02 p.m. UTC 
No current devices use IRQs in platform data, so remove support for
it. The MDIO core will also initialise the new bus such that all
addresses are polled, so remove the unneeded re-initialisation.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/mdio-gpio.c             | 7 -------
 include/linux/platform_data/mdio-gpio.h | 2 --
 2 files changed, 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 676ba0dd04be..0f8c748c8edd 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -130,7 +130,6 @@  static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
 {
 	struct mii_bus *new_bus;
 	struct mdio_gpio_info *bitbang;
-	int i;
 	int mdc, mdio, mdo;
 	unsigned long mdc_flags = GPIOF_OUT_INIT_LOW;
 	unsigned long mdio_flags = GPIOF_DIR_IN;
@@ -161,14 +160,8 @@  static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
 		goto out;
 
 	new_bus->name = "GPIO Bitbanged MDIO";
-
-	memcpy(new_bus->irq, pdata->irqs, sizeof(new_bus->irq));
 	new_bus->parent = dev;
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		if (!new_bus->irq[i])
-			new_bus->irq[i] = PHY_POLL;
-
 	if (bus_id != -1)
 		snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id);
 	else
diff --git a/include/linux/platform_data/mdio-gpio.h b/include/linux/platform_data/mdio-gpio.h
index 7d55dfef56dc..af3be0c4ff9b 100644
--- a/include/linux/platform_data/mdio-gpio.h
+++ b/include/linux/platform_data/mdio-gpio.h
@@ -22,8 +22,6 @@  struct mdio_gpio_platform_data {
 	bool mdc_active_low;
 	bool mdio_active_low;
 	bool mdo_active_low;
-
-	int irqs[PHY_MAX_ADDR];
 };
 
 #endif /* __LINUX_MDIO_GPIO_H */