diff mbox

[RFC,2/2,-mm] RapidIO: TSI721 Add DMA Engine support

Message ID 20110930151544.31875132.akpm00@gmail.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Andrew Morton Sept. 30, 2011, 10:15 p.m. UTC 
On Fri, 30 Sep 2011 17:38:35 -0400
Alexandre Bounine <alexandre.bounine@idt.com> wrote:

> Adds support for DMA Engine API.
> 
> Includes following changes:
> - Modifies BDMA register offset definitions to support per-channel handling
> - Separates BDMA channel reserved for RIO Maintenance requests
> - Adds DMA Engine callback routines
> 
> ...
>
>  5 files changed, 1029 insertions(+), 90 deletions(-)

hm, what a lot of code.

> +config TSI721_DMA
> +	bool "IDT Tsi721 RapidIO DMA support"
> +	depends on RAPIDIO_TSI721
> +	default "n"
> +	select RAPIDIO_DMA_ENGINE
> +	help
> +	  Enable DMA support for IDT Tsi721 PCIe-to-SRIO controller.

Do we really need to offer this decision to the user?  If possible it
would be better to always enable the feature where that makes sense. 
Better code coverage, less maintenance effort, more effective testing
effort, possibly cleaner code.

>
> ...
>
> +static int tsi721_bdma_ch_init(struct tsi721_bdma_chan *chan)
> +{
> +	struct tsi721_dma_desc *bd_ptr;
> +	struct device *dev = chan->dchan.device->dev;
> +	u64		*sts_ptr;
> +	dma_addr_t	bd_phys;
> +	dma_addr_t	sts_phys;
> +	int		sts_size;
> +	int		bd_num = chan->bd_num;
> +
> +	dev_dbg(dev, "Init Block DMA Engine, CH%d\n", chan->id);
> +
> +	/* Allocate space for DMA descriptors */
> +	bd_ptr = dma_alloc_coherent(dev,
> +				bd_num * sizeof(struct tsi721_dma_desc),
> +				&bd_phys, GFP_KERNEL);
> +	if (!bd_ptr)
> +		return -ENOMEM;
> +
> +	chan->bd_phys = bd_phys;
> +	chan->bd_base = bd_ptr;
> +
> +	memset(bd_ptr, 0, bd_num * sizeof(struct tsi721_dma_desc));
> +
> +	dev_dbg(dev, "DMA descriptors @ %p (phys = %llx)\n",
> +		bd_ptr, (unsigned long long)bd_phys);
> +
> +	/* Allocate space for descriptor status FIFO */
> +	sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
> +					bd_num : TSI721_DMA_MINSTSSZ;
> +	sts_size = roundup_pow_of_two(sts_size);
> +	sts_ptr = dma_alloc_coherent(dev,
> +				     sts_size * sizeof(struct tsi721_dma_sts),
> +				     &sts_phys, GFP_KERNEL);
> +	if (!sts_ptr) {
> +		/* Free space allocated for DMA descriptors */
> +		dma_free_coherent(dev,
> +				  bd_num * sizeof(struct tsi721_dma_desc),
> +				  bd_ptr, bd_phys);
> +		chan->bd_base = NULL;
> +		return -ENOMEM;
> +	}
> +
> +	chan->sts_phys = sts_phys;
> +	chan->sts_base = sts_ptr;
> +	chan->sts_size = sts_size;
> +
> +	memset(sts_ptr, 0, sts_size);

You meant


However that's at least two instances where you wanted a
dma_zalloc_coherent().  How's about we give ourselves one?


> +	dev_dbg(dev,
> +		"desc status FIFO @ %p (phys = %llx) size=0x%x\n",
> +		sts_ptr, (unsigned long long)sts_phys, sts_size);
> +
> +	/* Initialize DMA descriptors ring */
> +	bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29);
> +	bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys &
> +						 TSI721_DMAC_DPTRL_MASK);
> +	bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32);
> +
> +	/* Setup DMA descriptor pointers */
> +	iowrite32(((u64)bd_phys >> 32),
> +		chan->regs + TSI721_DMAC_DPTRH);
> +	iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
> +		chan->regs + TSI721_DMAC_DPTRL);
> +
> +	/* Setup descriptor status FIFO */
> +	iowrite32(((u64)sts_phys >> 32),
> +		chan->regs + TSI721_DMAC_DSBH);
> +	iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
> +		chan->regs + TSI721_DMAC_DSBL);
> +	iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
> +		chan->regs + TSI721_DMAC_DSSZ);
> +
> +	/* Clear interrupt bits */
> +	iowrite32(TSI721_DMAC_INT_ALL,
> +		chan->regs + TSI721_DMAC_INT);
> +
> +	ioread32(chan->regs + TSI721_DMAC_INT);
> +
> +	/* Toggle DMA channel initialization */
> +	iowrite32(TSI721_DMAC_CTL_INIT,	chan->regs + TSI721_DMAC_CTL);
> +	ioread32(chan->regs + TSI721_DMAC_CTL);
> +	chan->wr_count = chan->wr_count_next = 0;
> +	chan->sts_rdptr = 0;
> +	udelay(10);
> +
> +	return 0;
> +}
> +
>
> ...
>
> +{
> +	/* Disable BDMA channel interrupts */
> +	iowrite32(0, chan->regs + TSI721_DMAC_INTE);
> +
> +	tasklet_schedule(&chan->tasklet);

I'm not seeing any tasklet_disable()s on the shutdown/rmmod paths.  Is
there anything here which prevents shutdown races against a
still-pending tasklet?

> +}
> +
>
> ...
>
> +static
> +int tsi721_fill_desc(struct tsi721_bdma_chan *chan, struct tsi721_tx_desc *desc,
> +	struct scatterlist *sg, enum dma_rtype rtype, u32 sys_size)
> +{
> +	struct tsi721_dma_desc *bd_ptr = desc->hw_desc;
> +	u64 rio_addr;
> +
> +	if (sg_dma_len(sg) > TSI721_DMAD_BCOUNT1 + 1) {
> +		dev_err(chan->dchan.device->dev, "SG element is too large\n");
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(chan->dchan.device->dev,
> +		"desc: 0x%llx, addr: 0x%llx len: 0x%x\n",
> +		(u64)desc->txd.phys, (unsigned long long)sg_dma_address(sg),
> +		sg_dma_len(sg));
> +
> +	dev_dbg(chan->dchan.device->dev, "bd_ptr = %p did=%d raddr=0x%llx\n",
> +		bd_ptr, desc->destid, desc->rio_addr);
> +
> +	/* Initialize DMA descriptor */
> +	bd_ptr->type_id = cpu_to_le32((DTYPE1 << 29) |
> +					(rtype << 19) | desc->destid);
> +	if (desc->interrupt)
> +		bd_ptr->type_id |= cpu_to_le32(TSI721_DMAD_IOF);
> +	bd_ptr->bcount = cpu_to_le32(((desc->rio_addr & 0x3) << 30) |
> +					(sys_size << 26) | sg_dma_len(sg));
> +	rio_addr = (desc->rio_addr >> 2) |
> +				((u64)(desc->rio_addr_u & 0x3) << 62);
> +	bd_ptr->raddr_lo = cpu_to_le32(rio_addr & 0xffffffff);
> +	bd_ptr->raddr_hi = cpu_to_le32(rio_addr >> 32);
> +	bd_ptr->t1.bufptr_lo = cpu_to_le32(
> +					(u64)sg_dma_address(sg) & 0xffffffff);
> +	bd_ptr->t1.bufptr_hi = cpu_to_le32((u64)sg_dma_address(sg) >> 32);
> +	bd_ptr->t1.s_dist = 0;
> +	bd_ptr->t1.s_size = 0;
> +
> +	mb();

Mystery barrier needs a comment explaining why it's here, please.  This
is almost always the case with barriers.

> +	return 0;
> +}
> +
>
> ...
>
> +static int tsi721_alloc_chan_resources(struct dma_chan *dchan)
> +{
> +	struct tsi721_bdma_chan *chan = to_tsi721_chan(dchan);
> +	struct tsi721_device *priv = to_tsi721(dchan->device);
> +	struct tsi721_tx_desc *desc = NULL;
> +	LIST_HEAD(tmp_list);
> +	int i;
> +	int rc;
> +
> +	if (chan->bd_base)
> +		return chan->bd_num - 1;
> +
> +	/* Initialize BDMA channel */
> +	if (tsi721_bdma_ch_init(chan)) {
> +		dev_err(dchan->device->dev, "Unable to initialize data DMA"
> +			" channel %d, aborting\n", chan->id);
> +		return -ENOMEM;
> +	}
> +
> +	/* Allocate matching number of logical descriptors */
> +	desc = kzalloc((chan->bd_num - 1) * sizeof(struct tsi721_tx_desc),
> +			GFP_KERNEL);

kcalloc() would be a better fit here.

> +	if (!desc) {
> +		dev_err(dchan->device->dev,
> +			"Failed to allocate logical descriptors\n");
> +		rc = -ENOMEM;
> +		goto err_out;
> +	}
> +
> +	chan->tx_desc = desc;
> +
> +	for (i = 0; i < chan->bd_num - 1; i++) {
> +		dma_async_tx_descriptor_init(&desc[i].txd, dchan);
> +		desc[i].txd.tx_submit = tsi721_tx_submit;
> +		desc[i].txd.flags = DMA_CTRL_ACK;
> +		INIT_LIST_HEAD(&desc[i].tx_list);
> +		list_add_tail(&desc[i].desc_node, &tmp_list);
> +	}
> +
> +	spin_lock_bh(&chan->lock);
> +	list_splice(&tmp_list, &chan->free_list);
> +	chan->completed_cookie = dchan->cookie = 1;
> +	spin_unlock_bh(&chan->lock);
> +
> +#ifdef CONFIG_PCI_MSI
> +	if (priv->flags & TSI721_USING_MSIX) {
> +		/* Request interrupt service if we are in MSI-X mode */
> +		rc = request_irq(
> +			priv->msix[TSI721_VECT_DMA0_DONE + chan->id].vector,
> +			tsi721_bdma_msix, 0,
> +			priv->msix[TSI721_VECT_DMA0_DONE + chan->id].irq_name,
> +			(void *)chan);
> +
> +		if (rc) {
> +			dev_dbg(dchan->device->dev,
> +				"Unable to allocate MSI-X interrupt for "
> +				"BDMA%d-DONE\n", chan->id);
> +			goto err_out;
> +		}
> +
> +		rc = request_irq(priv->msix[TSI721_VECT_DMA0_INT +
> +					    chan->id].vector,
> +			tsi721_bdma_msix, 0,
> +			priv->msix[TSI721_VECT_DMA0_INT + chan->id].irq_name,
> +			(void *)chan);
> +
> +		if (rc)	{
> +			dev_dbg(dchan->device->dev,
> +				"Unable to allocate MSI-X interrupt for "
> +				"BDMA%d-INT\n", chan->id);
> +			free_irq(
> +				priv->msix[TSI721_VECT_DMA0_DONE +
> +					   chan->id].vector,
> +				(void *)chan);
> +			rc = -EIO;
> +			goto err_out;
> +		}
> +	}
> +#endif /* CONFIG_PCI_MSI */
> +
> +	tsi721_bdma_interrupt_enable(chan, 1);
> +
> +	return chan->bd_num - 1;
> +
> +err_out:
> +	kfree(desc);
> +	tsi721_bdma_ch_free(chan);
> +	return rc;
> +}
> +
>
> ...
>
> +static
> +enum dma_status tsi721_tx_status(struct dma_chan *dchan, dma_cookie_t cookie,
> +				 struct dma_tx_state *txstate)
> +{
> +	struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
> +	dma_cookie_t		last_used;
> +	dma_cookie_t		last_completed;
> +	int			ret;
> +
> +	spin_lock_irq(&bdma_chan->lock);
> +	last_completed = bdma_chan->completed_cookie;
> +	last_used = dchan->cookie;
> +	spin_unlock_irq(&bdma_chan->lock);
> +
> +	ret = dma_async_is_complete(cookie, last_completed, last_used);
> +
> +	dma_set_tx_state(txstate, last_completed, last_used, 0);
> +
> +	dev_dbg(dchan->device->dev,
> +		"%s: exit, ret: %d, last_completed: %d, last_used: %d\n",
> +		__func__, ret, last_completed, last_used);
> +
> +	return ret;
> +}
> +
> +static void tsi721_issue_pending(struct dma_chan *dchan)
> +{
> +	struct tsi721_bdma_chan *chan = to_tsi721_chan(dchan);
> +
> +	dev_dbg(dchan->device->dev, "%s: Entry\n", __func__);
> +
> +	if (tsi721_dma_is_idle(chan)) {
> +		spin_lock_bh(&chan->lock);
> +		tsi721_advance_work(chan);
> +		spin_unlock_bh(&chan->lock);
> +	} else
> +		dev_dbg(dchan->device->dev,
> +			"%s: DMA channel still busy\n", __func__);
> +}

I really don't like that a "struct tsi721_bdma_chan *" is called "chan"
in come places and "bdma_chan" in others.  "bdma_chan" is better.

The code takes that lock with spin_lock_bh() in some places and
spin_lock_irq() in others.  I trust there's some method to it all ;) Has
it been carefully tested with lockdep enabled?

>
> ...
>

Comments

Andrew Morton Oct. 4, 2011, 9:43 p.m. UTC | #1 
On Mon, 3 Oct 2011 10:53:45 -0700
"Bounine, Alexandre" <Alexandre.Bounine@idt.com> wrote:

> > > +	memset(bd_ptr, 0, bd_num * sizeof(struct tsi721_dma_desc));
> > > +
> > > +	dev_dbg(dev, "DMA descriptors @ %p (phys = %llx)\n",
> > > +		bd_ptr, (unsigned long long)bd_phys);
> > > +
> > > +	/* Allocate space for descriptor status FIFO */
> > > +	sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
> > > +					bd_num : TSI721_DMA_MINSTSSZ;
> > > +	sts_size = roundup_pow_of_two(sts_size);
> > > +	sts_ptr = dma_alloc_coherent(dev,
> > > +				     sts_size * sizeof(struct
> tsi721_dma_sts),
> > > +				     &sts_phys, GFP_KERNEL);
> > > +	if (!sts_ptr) {
> > > +		/* Free space allocated for DMA descriptors */
> > > +		dma_free_coherent(dev,
> > > +				  bd_num * sizeof(struct
> tsi721_dma_desc),
> > > +				  bd_ptr, bd_phys);
> > > +		chan->bd_base = NULL;
> > > +		return -ENOMEM;
> > > +	}
> > > +
> > > +	chan->sts_phys = sts_phys;
> > > +	chan->sts_base = sts_ptr;
> > > +	chan->sts_size = sts_size;
> > > +
> > > +	memset(sts_ptr, 0, sts_size);
> > 
> > You meant
> 
> I really need it here. That status block tracks progress by keeping
> non-zero addresses of processed descriptors.

Confused.  Are you saying that the use of "sts_size" there was
intentional?

> > 
> > --- a/drivers/rapidio/devices/tsi721.c~rapidio-tsi721-add-dma-engine-
> > support-fix
> > +++ a/drivers/rapidio/devices/tsi721.c
> > @@ -1006,7 +1006,7 @@ static int tsi721_bdma_maint_init(struct
> >  	priv->mdma.sts_base = sts_ptr;
> >  	priv->mdma.sts_size = sts_size;
> > 
> > -	memset(sts_ptr, 0, sts_size);
> > +	memset(sts_ptr, 0, sts_size * sizeof(struct tsi721_dma_sts));
> > 
> >  	dev_dbg(&priv->pdev->dev,
> >  		"desc status FIFO @ %p (phys = %llx) size=0x%x\n",
> > 
> > However that's at least two instances where you wanted a
> > dma_zalloc_coherent().  How's about we give ourselves one?
> 
> Does this mean that I am on hook for it as a "most frequent user"?

No, it can be used all over the place: drivers/net/irda/w83977af_ir.c,
drivers/scsi/bnx2fc/bnx2fc_tgt.c,
drivers/net/wireless/rt2x00/rt2x00pci.c,
drivers/crypto/amcc/crypto4xx_core.c and many nmore.
diff mbox

Patch

--- a/drivers/rapidio/devices/tsi721.c~rapidio-tsi721-add-dma-engine-support-fix
+++ a/drivers/rapidio/devices/tsi721.c
@@ -1006,7 +1006,7 @@  static int tsi721_bdma_maint_init(struct
 	priv->mdma.sts_base = sts_ptr;
 	priv->mdma.sts_size = sts_size;
 
-	memset(sts_ptr, 0, sts_size);
+	memset(sts_ptr, 0, sts_size * sizeof(struct tsi721_dma_sts));
 
 	dev_dbg(&priv->pdev->dev,
 		"desc status FIFO @ %p (phys = %llx) size=0x%x\n",