| Message ID | 20091014173132.2894d0fd@hyperion.delvare (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Commit | 99ca177ae4d31c3fbbea7ffb213b9724e4c26233 |
| Headers | show |
--- linux-2.6.32-rc4.orig/drivers/macintosh/therm_adt746x.c 2009-10-12 11:53:59.000000000 +0200 +++ linux-2.6.32-rc4/drivers/macintosh/therm_adt746x.c 2009-10-14 17:27:46.000000000 +0200 @@ -387,7 +387,7 @@ static int probe_thermostat(struct i2c_c i2c_set_clientdata(client, th); th->clt = client; - rc = read_reg(th, 0); + rc = read_reg(th, CONFIG_REG); if (rc < 0) { dev_err(&client->dev, "Thermostat failed to read config!\n"); kfree(th);
The ADT746x don't have any register at sub-address 0, so better use an existing register for the initial test read. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Colin Leroy <colin@colino.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> --- Tim, I don't really expect this to solve your problem, but who knows... Care to give it a try, just in case? drivers/macintosh/therm_adt746x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)