new file mode 100644
@@ -0,0 +1,303 @@
+/*
+ * Keymile kmcent2 Device Tree Source, based on T1040RDB DTS
+ *
+ * (C) Copyright 2016
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+
+/ {
+ model = "keymile,kmcent2";
+ compatible = "keymile,kmcent2";
+
+ aliases {
+ front_phy = &front_phy;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ };
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
+ };
+
+ ifc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x2000>;
+ ranges = <0 0 0xf 0xe8000000 0x04000000
+ 1 0 0xf 0xfa000000 0x00010000
+ 2 0 0xf 0xfb000000 0x00010000
+ 4 0 0xf 0xc0000000 0x08000000
+ 6 0 0xf 0xd0000000 0x08000000
+ 7 0 0xf 0xd8000000 0x08000000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x04000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+ };
+
+ board-control@2,0 {
+ compatible = "keymile,qriox";
+ reg = <0x2 0x0 0x80>;
+ };
+
+ chassis-mgmt@6,0 {
+ compatible = "keymile,bfticu";
+ reg = <6 0 0x100>;
+ interrupt-controller;
+ interrupt-parent = <&mpic>;
+ interrupts = <11 1 0 0>;
+ #interrupt-cells = <1>;
+ };
+
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+ };
+
+ bportals: bman-portals@ff4000000 {
+ ranges = <0x0 0xf 0xf4000000 0x2000000>;
+ };
+
+ qportals: qman-portals@ff6000000 {
+ ranges = <0x0 0xf 0xf6000000 0x2000000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
+ spi@110000 {
+ network-clock@1 {
+ compatible = "zarlink,zl30364";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ sdhc@114000 {
+ status = "disabled";
+ };
+
+ i2c@118000 {
+ clock-frequency = <100000>;
+
+ mux@70 {
+ compatible = "nxp,pca9547";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@54 {
+ compatible = "24c02";
+ reg = <0x54>;
+ pagesize = <2>;
+ read-only;
+ label = "ddr3-spd";
+ };
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temp-sensor@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ label = "SENSOR_0";
+ };
+ temp-sensor@4a {
+ compatible = "national,lm75";
+ reg = <0x4a>;
+ label = "SENSOR_2";
+ };
+ temp-sensor@4b {
+ compatible = "national,lm75";
+ reg = <0x4b>;
+ label = "SENSOR_3";
+ };
+ };
+ };
+ };
+
+ i2c@118100 {
+ clock-frequency = <100000>;
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ pagesize = <16>;
+ };
+ };
+
+ i2c@119000 {
+ status = "disabled";
+ };
+
+ i2c@119100 {
+ status = "disabled";
+ };
+
+ serial2: serial@11d500 {
+ status = "disabled";
+ };
+
+ serial3: serial@11d600 {
+ status = "disabled";
+ };
+
+ usb0: usb@210000 {
+ status = "disabled";
+ };
+ usb1: usb@211000 {
+ status = "disabled";
+ };
+
+ display@180000 {
+ status = "disabled";
+ };
+
+ sata@220000 {
+ status = "disabled";
+ };
+ sata@221000 {
+ status = "disabled";
+ };
+
+ fman@400000 {
+ ethernet@e0000 {
+ fixed-link = <0 1 1000 0 0>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ status = "disabled";
+ };
+
+ ethernet@e6000 {
+ status = "disabled";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&front_phy>;
+ phy-connection-type = "rgmii";
+ };
+
+ mdio0: mdio@fc000 {
+ front_phy: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ };
+ };
+ };
+
+
+ pci0: pcie@ffe240000 {
+ reg = <0xf 0xfe240000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe250000 {
+ status = "disabled";
+ };
+
+ pci2: pcie@ffe260000 {
+ status = "disabled";
+ };
+
+ pci3: pcie@ffe270000 {
+ status = "disabled";
+ };
+
+ qe: qe@ffe140000 {
+ ranges = <0x0 0xf 0xfe140000 0x40000>;
+ reg = <0xf 0xfe140000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+
+ si1: si@700 {
+ compatible = "fsl,t1040-qe-si";
+ reg = <0x700 0x80>;
+ };
+
+ siram1: siram@1000 {
+ compatible = "fsl,t1040-qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
+ ucc_hdlc: ucc@2000 {
+ device_type = "hdlc";
+ compatible = "fsl,ucc-hdlc";
+ rx-clock-name = "clk9";
+ tx-clock-name = "clk9";
+ fsl,tx-timeslot-mask = <0xfffffffe>;
+ fsl,rx-timeslot-mask = <0xfffffffe>;
+ fsl,siram-entry-id = <0>;
+ };
+ };
+};
+
+#include "t1040si-post.dtsi"
@@ -160,6 +160,7 @@ int __init corenet_gen_publish_devices(void)
"fsl,T1040RDB",
"fsl,T1042RDB",
"fsl,T1042RDB_PI",
+ "keymile,kmcent2",
"keymile,kmcoge4",
"varisys,CYRUS",
NULL
This board is built around Freescale's T1040 SoC. The peripherals used by this design are: - DDR3 RAM with SPD support - parallel NOR Flash as boot medium - 1 PCIe bus (PCIe1 x1) - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5) - 4 IFC bus devices: - NOR flash - NAND flash - QRIO reset/power mgmt CPLD - BFTIC chassis management CPLD - 2 I2C buses - 1 SPI bus - HDLC bus with the QE's UCC1 - last but not least, the mandatory serial port The board can be used with the corenet32_smp_defconfig. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> --- arch/powerpc/boot/dts/fsl/kmcent2.dts | 303 ++++++++++++++++++++++++++ arch/powerpc/platforms/85xx/corenet_generic.c | 1 + 2 files changed, 304 insertions(+) create mode 100644 arch/powerpc/boot/dts/fsl/kmcent2.dts