| Message ID | 1477266519-25173-2-git-send-email-afleming@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Scott Wood |
| Headers | show |
Hi Andy,
me and some others are testing the cyrus_5040 and we sow inside the Lnx kernel there isnt the cyrus_5040.dts.
i just attched my dmsg and my lshw reports where you can see:
on dmesg there are issue on ata2 device, if i burn a cdrom i have a failure in burining , copy from to another partition some time become really slow 300kb/s (sata1 SSD to sata1 ssd partition).
if more than 3.5gb of ram is used (right now i have 16gb) we face a dma errors on pci boards.
lshw dont show L3 cache i face this on cyrus_5020 too, is this normal?
if is needed something more you can ask freely
Thanks
Luigi
dmesg
[ 0.000000] Allocated 16384 bytes for 8 pacas at c00000003fffc000
[ 0.000000] MMU: Supported page sizes
[ 0.000000] 4 KB as direct
[ 0.000000] 4096 KB as direct
[ 0.000000] 16384 KB as direct
[ 0.000000] 65536 KB as direct
[ 0.000000] 262144 KB as direct
[ 0.000000] 1048576 KB as direct
[ 0.000000] MMU: Book3E HW tablewalk not supported
[ 0.000000] Linux version 4.8.0-X5000-Tlosm-LB (amigaone@Amigaone) (gcc version 6.2.0 20160927 (Ubuntu 6.2.0-5ubuntu11) ) #1 SMP PREEMPT Mon Oct 3 19:10:49 CEST 2016
[ 0.000000] Using CoreNet Generic machine description
[ 0.000000] Found legacy serial port 0 for /soc@ffe000000/serial@11c500
[ 0.000000] mem=ffe11c500, taddr=ffe11c500, irq=0, clk=400000000, speed=0
[ 0.000000] Found legacy serial port 1 for /soc@ffe000000/serial@11c600
[ 0.000000] mem=ffe11c600, taddr=ffe11c600, irq=0, clk=400000000, speed=0
[ 0.000000] Found legacy serial port 2 for /soc@ffe000000/serial@11d500
[ 0.000000] mem=ffe11d500, taddr=ffe11d500, irq=0, clk=400000000, speed=0
[ 0.000000] Found legacy serial port 3 for /soc@ffe000000/serial@11d600
[ 0.000000] mem=ffe11d600, taddr=ffe11d600, irq=0, clk=400000000, speed=0
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] Freed 8192 bytes for unused pacas
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0xdac00000
[ 0.000000] dcache_bsize = 0x40
[ 0.000000] icache_bsize = 0x40
[ 0.000000] cpu_features = 0x00180400581802c0
[ 0.000000] possible = 0x00180480581802c0
[ 0.000000] always = 0x00180400581802c0
[ 0.000000] cpu_user_features = 0xcc008000 0x08000000
[ 0.000000] mmu_features = 0x000a0010
[ 0.000000] firmware_features = 0x0000000000000000
[ 0.000000] -----------------------------------------------------
[ 0.000000] CoreNet Generic board
[ 0.000000] Top of RAM: 0xdac00000, Total RAM: 0xdac00000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000080000000-0x00000000dabfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000dabfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000dabfffff]
[ 0.000000] On node 0 totalpages: 896000
[ 0.000000] free_area_init_node: node 0, pgdat c0000000010b75c0, node_mem_map c0000000d7b94000
[ 0.000000] DMA zone: 7168 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 524288 pages, LIFO batch:31
[ 0.000000] Normal zone: 5082 pages used for memmap
[ 0.000000] Normal zone: 371712 pages, LIFO batch:31
[ 0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts
[ 0.000000] percpu: Embedded 19 pages/cpu @c0000000d7a00000 s37096 r0 d40728 u262144
[ 0.000000] pcpu-alloc: s37096 r0 d40728 u262144 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 883750
[ 0.000000] Kernel command line: root=/dev/sda2 mem=3500M radeon.pcie_gen2=1 pci=realloc
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 3441728K/3584000K available (10660K kernel code, 1856K rwdata, 5556K rodata, 384K init, 1458K bss, 142272K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff
[ 0.000000] mpic: Initializing for 512 sources
[ 0.000000] time_init: decrementer frequency = 50.000000 MHz
[ 0.000000] time_init: processor frequency = 2200.000000 MHz
[ 0.000003] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[ 0.000008] clocksource: timebase mult[14000000] shift[24] registered
[ 0.000013] clockevent: decrementer mult[ccccccd] shift[32] cpu[0]
[ 0.000859] Console: colour dummy device 80x25
[ 0.001171] console [tty0] enabled
[ 0.001186] pid_max: default: 32768 minimum: 301
[ 0.001232] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001243] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001764] e500 family performance monitor hardware support registered
[ 0.020349] Brought up 4 CPUs
[ 0.020608] devtmpfs: initialized
[ 0.024219] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.024291] xor: measuring software checksum speed
[ 0.034182] 8regs : 4508.000 MB/sec
[ 0.044201] 8regs_prefetch: 4180.000 MB/sec
[ 0.054221] 32regs : 4792.000 MB/sec
[ 0.064241] 32regs_prefetch: 4180.000 MB/sec
[ 0.064249] xor: using function: 32regs (4792.000 MB/sec)
[ 0.064259] prandom: seed boundary self test passed
[ 0.065320] prandom: 100 self tests passed
[ 0.065725] NET: Registered protocol family 16
[ 0.071269] cpuidle: using governor ladder
[ 0.075278] cpuidle: using governor menu
[ 0.087578] Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->1
[ 0.087594] PCI host bridge /pcie@ffe200000 ranges:
[ 0.087604] MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000
[ 0.087615] IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
[ 0.087632] /pcie@ffe200000: PCICSRBAR @ 0xdf000000
[ 0.087639] setup_pci_atmu: end of DRAM dac00000
[ 0.087650] /pcie@ffe200000: Setting PCI inbound window greater than memory size
[ 0.087909] Found FSL PCI host bridge at 0x0000000ffe201000. Firmware bus number: 0->8
[ 0.087920] PCI host bridge /pcie@ffe201000 ranges:
[ 0.087930] MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000
[ 0.087940] IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
[ 0.087956] /pcie@ffe201000: PCICSRBAR @ 0xdf000000
[ 0.087963] setup_pci_atmu: end of DRAM dac00000
[ 0.087973] /pcie@ffe201000: Setting PCI inbound window greater than memory size
[ 0.088875] iommu: Adding device ff4200000.qman-portal to group 0
[ 0.088900] iommu: Adding device ff4204000.qman-portal to group 1
[ 0.088919] iommu: Adding device ff4208000.qman-portal to group 2
[ 0.088938] iommu: Adding device ff420c000.qman-portal to group 3
[ 0.088958] iommu: Adding device ff4210000.qman-portal to group 4
[ 0.088977] iommu: Adding device ff4214000.qman-portal to group 5
[ 0.088996] iommu: Adding device ff4218000.qman-portal to group 6
[ 0.089015] iommu: Adding device ff421c000.qman-portal to group 7
[ 0.089036] iommu: Adding device ff4220000.qman-portal to group 8
[ 0.089057] iommu: Adding device ff4224000.qman-portal to group 9
[ 0.089099] iommu: Adding device ffe488000.port to group 10
[ 0.089120] iommu: Adding device ffe489000.port to group 11
[ 0.089142] iommu: Adding device ffe48a000.port to group 12
[ 0.089162] iommu: Adding device ffe48b000.port to group 13
[ 0.089182] iommu: Adding device ffe48c000.port to group 14
[ 0.089202] iommu: Adding device ffe490000.port to group 15
[ 0.089236] iommu: Adding device ffe588000.port to group 16
[ 0.089256] iommu: Adding device ffe589000.port to group 17
[ 0.089276] iommu: Adding device ffe58a000.port to group 18
[ 0.089297] iommu: Adding device ffe58b000.port to group 19
[ 0.089317] iommu: Adding device ffe58c000.port to group 20
[ 0.089349] iommu: Adding device ffe590000.port to group 21
[ 0.089388] iommu: Adding device ffe100300.dma to group 22
[ 0.089407] iommu: Adding device ffe101300.dma to group 23
[ 0.089425] iommu: Adding device ffe114000.sdhc to group 24
[ 0.089452] iommu: Adding device ffe210000.usb to group 25
[ 0.089470] iommu: Adding device ffe211000.usb to group 26
[ 0.089491] iommu: Adding device ffe220000.sata to group 27
[ 0.089509] iommu: Adding device ffe221000.sata to group 28
[ 0.089531] iommu: Adding device ffe318000.qman to group 29
[ 0.089550] iommu: Adding device ffe31a000.bman to group 30
[ 0.089569] iommu: Adding device ffe200000.pcie to group 31
[ 0.089589] iommu: Adding device ffe201000.pcie to group 32
[ 0.097491] PCI: Probing PCI hardware
[ 0.097625] fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00
[ 0.097638] pci_bus 0000:00: root bus resource [io 0x8000080000010000-0x800008000001ffff] (bus address [0x0000-0xffff])
[ 0.097652] pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff])
[ 0.097666] pci_bus 0000:00: root bus resource [bus 00-01]
[ 0.097676] pci_bus 0000:00: busn_res: [bus 00-01] end is updated to ff
[ 0.097694] pci 0000:00:00.0: [1957:0451] type 01 class 0x0b2000
[ 0.097709] pci 0000:00:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff]
[ 0.097755] pci 0000:00:00.0: supports D1 D2
[ 0.097758] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097817] iommu: Removing device ffe200000.pcie from group 31
[ 0.097841] iommu: Adding device 0000:00:00.0 to group 33
[ 0.098027] pci 0000:01:00.0: [1002:6742] type 00 class 0x030000
[ 0.098047] pci 0000:01:00.0: reg 0x10: [mem 0xc00000000-0xc0fffffff 64bit pref]
[ 0.098059] pci 0000:01:00.0: reg 0x18: [mem 0xc10000000-0xc1001ffff 64bit]
[ 0.098068] pci 0000:01:00.0: reg 0x20: [io 0x8000080000011000-0x80000800000110ff]
[ 0.098083] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.098140] pci 0000:01:00.0: supports D1 D2
[ 0.098197] iommu: Adding device 0000:01:00.0 to group 33
[ 0.098253] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[ 0.098272] pci 0000:01:00.1: reg 0x10: [mem 0xc10020000-0xc10023fff 64bit]
[ 0.098358] pci 0000:01:00.1: supports D1 D2
[ 0.098413] iommu: Adding device 0000:01:00.1 to group 33
[ 0.101503] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.101516] pci 0000:00:00.0: bridge window [io 0x8000080000011000-0x8000080000011fff]
[ 0.101520] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc100fffff]
[ 0.101572] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.101577] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.101651] fsl-pci ffe201000.pcie: PCI host bridge to bus 1000:00
[ 0.101663] pci_bus 1000:00: root bus resource [io 0x8000080000021000-0x8000080000030fff] (bus address [0x0000-0xffff])
[ 0.101677] pci_bus 1000:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff])
[ 0.101690] pci_bus 1000:00: root bus resource [bus 00-08]
[ 0.101699] pci_bus 1000:00: busn_res: [bus 00-08] end is updated to ff
[ 0.101713] pci 1000:00:00.0: [1957:0451] type 01 class 0x0b2000
[ 0.101723] pci 1000:00:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff]
[ 0.101759] pci 1000:00:00.0: supports D1 D2
[ 0.101762] pci 1000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101817] iommu: Removing device ffe201000.pcie from group 32
[ 0.101838] iommu: Adding device 1000:00:00.0 to group 31
[ 0.102004] pci 1000:01:00.0: [111d:8092] type 01 class 0x060400
[ 0.102136] pci 1000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.102196] iommu: Adding device 1000:01:00.0 to group 31
[ 0.104508] pci 1000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.104521] pci 1000:00:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff]
[ 0.104525] pci 1000:00:00.0: bridge window [mem 0xc20000000-0xc200fffff]
[ 0.104652] pci 1000:02:01.0: [111d:8092] type 01 class 0x060400
[ 0.104799] pci 1000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.104860] iommu: Adding device 1000:02:01.0 to group 31
[ 0.104920] pci 1000:02:02.0: [111d:8092] type 01 class 0x060400
[ 0.105067] pci 1000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.105129] iommu: Adding device 1000:02:02.0 to group 31
[ 0.105191] pci 1000:02:03.0: [111d:8092] type 01 class 0x060400
[ 0.105338] pci 1000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.105400] iommu: Adding device 1000:02:03.0 to group 31
[ 0.105470] pci 1000:02:08.0: [111d:8092] type 01 class 0x060400
[ 0.105625] pci 1000:02:08.0: PME# supported from D0 D3hot D3cold
[ 0.105687] iommu: Adding device 1000:02:08.0 to group 31
[ 0.105759] pci 1000:02:10.0: [111d:8092] type 01 class 0x060400
[ 0.105887] pci 1000:02:10.0: PME# supported from D0 D3hot D3cold
[ 0.105945] iommu: Adding device 1000:02:10.0 to group 31
[ 0.106012] pci 1000:01:00.0: PCI bridge to [bus 02-ff]
[ 0.106029] pci 1000:01:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff]
[ 0.106036] pci 1000:01:00.0: bridge window [mem 0xc20000000-0xc200fffff]
[ 0.106222] pci 1000:03:00.0: [12d8:e111] type 01 class 0x060400
[ 0.106359] pci 1000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.106437] iommu: Adding device 1000:03:00.0 to group 31
[ 0.108526] pci 1000:02:01.0: PCI bridge to [bus 03-ff]
[ 0.108543] pci 1000:02:01.0: bridge window [io 0x8000080000022000-0x8000080000022fff]
[ 0.108550] pci 1000:02:01.0: bridge window [mem 0xc20000000-0xc200fffff]
[ 0.108705] pci 1000:04:04.0: [10ec:8169] type 00 class 0x020000
[ 0.108730] pci 1000:04:04.0: reg 0x10: [io 0x8000080000022000-0x80000800000220ff]
[ 0.108743] pci 1000:04:04.0: reg 0x14: [mem 0xc20000000-0xc200000ff]
[ 0.108807] pci 1000:04:04.0: reg 0x30: [mem 0x534c0000-0x534dffff pref]
[ 0.108859] pci 1000:04:04.0: supports D1 D2
[ 0.108862] pci 1000:04:04.0: PME# supported from D1 D2 D3hot D3cold
[ 0.108913] iommu: Adding device 1000:04:04.0 to group 31
[ 0.108970] pci 1000:04:05.0: [1095:3114] type 00 class 0x010400
[ 0.108995] pci 1000:04:05.0: reg 0x10: [io 0x8000080000022100-0x8000080000022107]
[ 0.109008] pci 1000:04:05.0: reg 0x14: [io 0x8000080000022108-0x800008000002210b]
[ 0.109021] pci 1000:04:05.0: reg 0x18: [io 0x8000080000022110-0x8000080000022117]
[ 0.109034] pci 1000:04:05.0: reg 0x1c: [io 0x8000080000022118-0x800008000002211b]
[ 0.109048] pci 1000:04:05.0: reg 0x20: [io 0x8000080000022120-0x800008000002212f]
[ 0.109061] pci 1000:04:05.0: reg 0x24: [mem 0xc20000400-0xc200007ff]
[ 0.109074] pci 1000:04:05.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.109125] pci 1000:04:05.0: supports D1 D2
[ 0.109172] iommu: Adding device 1000:04:05.0 to group 31
[ 0.109267] pci 1000:03:00.0: PCI bridge to [bus 04-ff]
[ 0.109284] pci 1000:03:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff]
[ 0.109290] pci 1000:03:00.0: bridge window [mem 0xc20000000-0xc200fffff]
[ 0.109336] pci_bus 1000:04: busn_res: [bus 04-ff] end is updated to 04
[ 0.109341] pci_bus 1000:03: busn_res: [bus 03-ff] end is updated to 04
[ 0.109438] pci 1000:02:02.0: PCI bridge to [bus 05-ff]
[ 0.109470] pci_bus 1000:05: busn_res: [bus 05-ff] end is updated to 05
[ 0.109571] pci 1000:02:03.0: PCI bridge to [bus 06-ff]
[ 0.109603] pci_bus 1000:06: busn_res: [bus 06-ff] end is updated to 06
[ 0.109698] pci 1000:02:08.0: PCI bridge to [bus 07-ff]
[ 0.109730] pci_bus 1000:07: busn_res: [bus 07-ff] end is updated to 07
[ 0.109822] pci 1000:02:10.0: PCI bridge to [bus 08-ff]
[ 0.109854] pci_bus 1000:08: busn_res: [bus 08-ff] end is updated to 08
[ 0.109858] pci_bus 1000:02: busn_res: [bus 02-ff] end is updated to 08
[ 0.109863] pci_bus 1000:01: busn_res: [bus 01-ff] end is updated to 08
[ 0.109867] pci_bus 1000:00: busn_res: [bus 00-ff] end is updated to 08
[ 0.109881] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
[ 0.109900] PCI: Cannot allocate resource region 0 of device 1000:00:00.0, will remap
[ 0.109933] PCI: Cannot allocate resource region 6 of device 1000:04:04.0, will remap
[ 0.109985] PCI 0000:00 Cannot reserve Legacy IO [io 0x8000080000010000-0x10fff]
[ 0.109988] PCI 1000:00 Cannot reserve Legacy IO [io 0x8000080000021000-0x21fff]
[ 0.109992] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
[ 0.110004] pci 0000:00:00.0: BAR 0: no space for [mem size 0x01000000]
[ 0.110014] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x01000000]
[ 0.110026] pci 0000:01:00.0: BAR 6: assigned [mem 0xc10040000-0xc1005ffff pref]
[ 0.110037] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.110047] pci 0000:00:00.0: bridge window [io 0x8000080000010000-0x800008000001ffff]
[ 0.110059] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff]
[ 0.110070] pci_bus 0000:00: No. 2 try to assign unassigned res
[ 0.110078] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.110087] pci 0000:00:00.0: bridge window [io 0x8000080000010000-0x800008000001ffff]
[ 0.110099] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff]
[ 0.110112] pci_bus 0000:00: resource 4 [io 0x8000080000010000-0x800008000001ffff]
[ 0.110115] pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff]
[ 0.110118] pci_bus 0000:01: resource 0 [io 0x8000080000010000-0x800008000001ffff]
[ 0.110121] pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff]
[ 0.110124] pci_bus 1000:00: max bus depth: 4 pci_try_num: 5
[ 0.110204] pci 1000:00:00.0: BAR 0: no space for [mem size 0x01000000]
[ 0.110214] pci 1000:00:00.0: BAR 0: failed to assign [mem size 0x01000000]
[ 0.110226] pci 1000:04:05.0: BAR 6: assigned [mem 0xc20080000-0xc200fffff pref]
[ 0.110238] pci 1000:04:04.0: BAR 6: assigned [mem 0xc20020000-0xc2003ffff pref]
[ 0.110248] pci 1000:03:00.0: PCI bridge to [bus 04]
[ 0.110259] pci 1000:03:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff]
[ 0.110271] pci 1000:03:00.0: bridge window [mem 0xc20000000-0xc200fffff]
[ 0.110284] pci 1000:02:01.0: PCI bridge to [bus 03-04]
[ 0.110294] pci 1000:02:01.0: bridge window [io 0x8000080000022000-0x8000080000022fff]
[ 0.110306] pci 1000:02:01.0: bridge window [mem 0xc20000000-0xc200fffff]
[ 0.110321] pci 1000:02:02.0: PCI bridge to [bus 05]
[ 0.110340] pci 1000:02:03.0: PCI bridge to [bus 06]
[ 0.110359] pci 1000:02:08.0: PCI bridge to [bus 07]
[ 0.110378] pci 1000:02:10.0: PCI bridge to [bus 08]
[ 0.110397] pci 1000:01:00.0: PCI bridge to [bus 02-08]
[ 0.110407] pci 1000:01:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff]
[ 0.110419] pci 1000:01:00.0: bridge window [mem 0xc20000000-0xc200fffff]
[ 0.110434] pci 1000:00:00.0: PCI bridge to [bus 01-08]
[ 0.110444] pci 1000:00:00.0: bridge window [io 0x8000080000021000-0x8000080000030fff]
[ 0.110456] pci 1000:00:00.0: bridge window [mem 0xc20000000-0xc3fffffff]
[ 0.110467] pci_bus 1000:00: No. 2 try to assign unassigned res
[ 0.110553] pci 1000:03:00.0: PCI bridge to [bus 04]
[ 0.110564] pci 1000:03:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff]
[ 0.110576] pci 1000:03:00.0: bridge window [mem 0xc20000000-0xc200fffff]
[ 0.110589] pci 1000:02:01.0: PCI bridge to [bus 03-04]
[ 0.110600] pci 1000:02:01.0: bridge window [io 0x8000080000022000-0x8000080000022fff]
[ 0.110612] pci 1000:02:01.0: bridge window [mem 0xc20000000-0xc200fffff]
[ 0.110627] pci 1000:02:02.0: PCI bridge to [bus 05]
[ 0.110646] pci 1000:02:03.0: PCI bridge to [bus 06]
[ 0.110664] pci 1000:02:08.0: PCI bridge to [bus 07]
[ 0.110683] pci 1000:02:10.0: PCI bridge to [bus 08]
[ 0.110703] pci 1000:01:00.0: PCI bridge to [bus 02-08]
[ 0.110713] pci 1000:01:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff]
[ 0.110725] pci 1000:01:00.0: bridge window [mem 0xc20000000-0xc200fffff]
[ 0.110740] pci 1000:00:00.0: PCI bridge to [bus 01-08]
[ 0.110750] pci 1000:00:00.0: bridge window [io 0x8000080000021000-0x8000080000030fff]
[ 0.110762] pci 1000:00:00.0: bridge window [mem 0xc20000000-0xc3fffffff]
[ 0.110773] pci_bus 1000:00: resource 4 [io 0x8000080000021000-0x8000080000030fff]
[ 0.110776] pci_bus 1000:00: resource 5 [mem 0xc20000000-0xc3fffffff]
[ 0.110780] pci_bus 1000:01: resource 0 [io 0x8000080000021000-0x8000080000030fff]
[ 0.110783] pci_bus 1000:01: resource 1 [mem 0xc20000000-0xc3fffffff]
[ 0.110786] pci_bus 1000:02: resource 0 [io 0x8000080000022000-0x8000080000022fff]
[ 0.110789] pci_bus 1000:02: resource 1 [mem 0xc20000000-0xc200fffff]
[ 0.110792] pci_bus 1000:03: resource 0 [io 0x8000080000022000-0x8000080000022fff]
[ 0.110795] pci_bus 1000:03: resource 1 [mem 0xc20000000-0xc200fffff]
[ 0.110798] pci_bus 1000:04: resource 0 [io 0x8000080000022000-0x8000080000022fff]
[ 0.110801] pci_bus 1000:04: resource 1 [mem 0xc20000000-0xc200fffff]
[ 0.110803] PCI: Probing PCI hardware done
[ 0.111473] Setting up Freescale MSI support
[ 0.111756] Setting up Freescale MSI support
[ 0.112024] Setting up Freescale MSI support
[ 0.146714] raid6: int64x1 gen() 789 MB/s
[ 0.163738] raid6: int64x1 xor() 574 MB/s
[ 0.180735] raid6: int64x2 gen() 1207 MB/s
[ 0.197780] raid6: int64x2 xor() 798 MB/s
[ 0.214854] raid6: int64x4 gen() 1218 MB/s
[ 0.231876] raid6: int64x4 xor() 753 MB/s
[ 0.248917] raid6: int64x8 gen() 1183 MB/s
[ 0.265975] raid6: int64x8 xor() 757 MB/s
[ 0.265982] raid6: using algorithm int64x4 gen() 1218 MB/s
[ 0.265990] raid6: .... xor() 753 MB/s, rmw enabled
[ 0.265997] raid6: using intx1 recovery algorithm
[ 0.266144] Freescale Elo series DMA driver
[ 0.266455] fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28
[ 0.266489] fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29
[ 0.266523] fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30
[ 0.266557] fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31
[ 0.266836] fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32
[ 0.266870] fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33
[ 0.266904] fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34
[ 0.266938] fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35
[ 0.267628] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.267652] vgaarb: loaded
[ 0.267658] vgaarb: bridge control possible 0000:01:00.0
[ 0.268070] SCSI subsystem initialized
[ 0.268206] libata version 3.00 loaded.
[ 0.268415] usbcore: registered new interface driver usbfs
[ 0.268466] usbcore: registered new interface driver hub
[ 0.268520] usbcore: registered new device driver usb
[ 0.268686] pps_core: LinuxPPS API ver. 1 registered
[ 0.268695] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.268732] PTP clock support registered
[ 0.268853] EDAC MC: Ver: 3.0.0
[ 0.269537] Advanced Linux Sound Architecture Driver Initialized.
[ 0.270131] clocksource: Switched to clocksource timebase
[ 0.274980] NET: Registered protocol family 2
[ 0.275280] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.275430] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.275949] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.276020] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.276156] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.276374] NET: Registered protocol family 1
[ 0.276605] RPC: Registered named UNIX socket transport module.
[ 0.276619] RPC: Registered udp transport module.
[ 0.276625] RPC: Registered tcp transport module.
[ 0.276633] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.276706] PCI: CLS 32 bytes, default 64
[ 0.277512] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.277720] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.282069] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.282842] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.283056] fuse init (API version 7.25)
[ 0.284825] async_tx: api initialized (async)
[ 0.284909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.284921] io scheduler noop registered
[ 0.284928] io scheduler deadline registered
[ 0.284993] io scheduler cfq registered (default)
[ 0.285884] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.285892] crc32: self tests passed, processed 225944 bytes in 423980 nsec
[ 0.286344] crc32c: CRC_LE_BITS = 64
[ 0.286351] crc32c: self tests passed, processed 225944 bytes in 215540 nsec
[ 0.316197] crc32_combine: 8373 self tests passed
[ 0.346628] crc32c_combine: 8373 self tests passed
[ 0.346647] glob: 64 self-tests passed, 0 failed
[ 0.348244] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.348305] aer 1000:00:00.0:pcie002: service driver aer loaded
[ 0.371404] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.372044] serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 25000000) is a 16550A
[ 0.372488] serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 25000000) is a 16550A
[ 0.372564] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEMffe11d500 IRQ37): -28
[ 0.372577] serial8250 serial8250.0: unable to register port at index 3 (IO0 MEMffe11d600 IRQ37): -28
[ 0.372687] ePAPR hypervisor byte channel driver
[ 0.372923] [drm] Initialized drm 1.1.0 20060810
[ 0.372949] [drm] radeon kernel modesetting enabled.
[ 0.373241] [drm] initializing kernel modesetting (TURKS 0x1002:0x6742 0x174B:0x6570 0x00).
[ 0.373265] [drm] register mmio base: 0x10000000
[ 0.373272] [drm] register mmio size: 131072
[ 0.551117] ATOM BIOS: Turks
[ 0.551287] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 0.551300] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 0.551310] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 0.551317] [drm] RAM width 128bits DDR
[ 0.551398] [TTM] Zone kernel: Available graphics memory: 1754350 kiB
[ 0.551406] [TTM] Initializing pool allocator
[ 0.551420] [TTM] Initializing DMA pool allocator
[ 0.551472] [drm] radeon: 2048M of VRAM memory ready
[ 0.551480] [drm] radeon: 1024M of GTT memory ready.
[ 0.551488] [drm] Loading TURKS Microcode
[ 0.551505] [drm] Internal thermal controller with fan control
[ 0.555924] [drm] radeon: dpm initialized
[ 0.555978] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.557809] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 0.591295] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 0.591461] radeon 0000:01:00.0: WB enabled
[ 0.591472] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xc0000000d2d87c00
[ 0.591486] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xc0000000d2d87c0c
[ 0.595699] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x80000800801b2118
[ 0.595713] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.595721] [drm] Driver supports precise vblank timestamp query.
[ 0.595730] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 0.595785] radeon 0000:01:00.0: radeon: using MSI.
[ 0.595828] [drm] radeon: irq initialized.
[ 0.612501] [drm] ring test on 0 succeeded in 2 usecs
[ 0.612521] [drm] ring test on 3 succeeded in 7 usecs
[ 0.789658] [drm] ring test on 5 succeeded in 2 usecs
[ 0.789675] [drm] UVD initialized successfully.
[ 0.789929] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.789997] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.448170] [drm] ib test on ring 5 succeeded
[ 1.454322] [drm] Radeon Display Connectors
[ 1.454331] [drm] Connector 0:
[ 1.454337] [drm] HDMI-A-1
[ 1.454342] [drm] HPD1
[ 1.454349] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 1.454358] [drm] Encoders:
[ 1.454364] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.454370] [drm] Connector 1:
[ 1.454375] [drm] DVI-D-1
[ 1.454381] [drm] HPD4
[ 1.454387] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 1.454396] [drm] Encoders:
[ 1.454402] [drm] DFP2: INTERNAL_UNIPHY
[ 1.454408] [drm] Connector 2:
[ 1.454413] [drm] VGA-1
[ 1.454420] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.454428] [drm] Encoders:
[ 1.454434] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.551710] [drm] fb mappable at 0xC00363000
[ 1.551719] [drm] vram apper at 0xC00000000
[ 1.551725] [drm] size 8294400
[ 1.551730] [drm] fb depth is 24
[ 1.551736] [drm] pitch is 7680
[ 1.710049] Console: switching to colour frame buffer device 240x67
[ 1.734440] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 1.734639] [drm] Initialized radeon 2.46.0 20080528 for 0000:01:00.0 on minor 0
[ 1.738675] brd: module loaded
[ 1.740821] loop: module loaded
[ 2.796224] Loading iSCSI transport class v2.0-870.
[ 2.796624] iscsi: registered transport (tcp)
[ 2.797845] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
[ 2.798350] scsi host0: sata_fsl
[ 2.798531] ata1: SATA max UDMA/133 irq 68
[ 2.798644] fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
[ 2.799008] scsi host1: sata_fsl
[ 2.799146] ata2: SATA max UDMA/133 irq 69
[ 2.799566] sata_sil 1000:04:05.0: version 2.4
[ 2.799633] sata_sil 1000:04:05.0: Applying R_ERR on DMA activate FIS errata fix
[ 2.800389] scsi host2: sata_sil
[ 2.800583] scsi host3: sata_sil
[ 2.800773] scsi host4: sata_sil
[ 2.800962] scsi host5: sata_sil
[ 2.801095] ata3: SATA max UDMA/100 mmio m1024@0xc20000400 tf 0xc20000480 irq 19
[ 2.801250] ata4: SATA max UDMA/100 mmio m1024@0xc20000400 tf 0xc200004c0 irq 19
[ 2.801398] ata5: SATA max UDMA/100 mmio m1024@0xc20000400 tf 0xc20000680 irq 19
[ 2.801544] ata6: SATA max UDMA/100 mmio m1024@0xc20000400 tf 0xc200006c0 irq 19
[ 2.801867] platform physmap-flash.0: failed to claim resource 0
[ 2.802927] fsl_espi ffe110000.spi: at 0x8000080080068000 (irq = 53)
[ 2.803805] libphy: Fixed MDIO Bus: probed
[ 2.804390] libphy: Freescale PowerQUICC MII Bus: probed
[ 2.805222] libphy: Freescale XGMAC MDIO Bus: probed
[ 2.805746] fsl-fman ffe400000.fman: read_dts_node: Failed to get FM0 clock structure
[ 2.805906] fsl-fman: probe of ffe400000.fman failed with error -5
[ 2.806063] fsl-fman ffe500000.fman: read_dts_node: Failed to get FM1 clock structure
[ 2.806236] fsl-fman: probe of ffe500000.fman failed with error -5
[ 2.806935] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.807074] r8169 1000:04:04.0 (unnamed net_device) (uninitialized): not PCI Express
[ 2.807558] r8169 1000:04:04.0 eth0: RTL8169sb/8110sb at 0x800008008006e000, 60:e3:27:05:53:20, XID 10000000 IRQ 18
[ 2.807763] r8169 1000:04:04.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 2.807969] PPP generic driver version 2.4.2
[ 2.808131] PPP BSD Compression module registered
[ 2.808235] PPP Deflate Compression module registered
[ 2.812735] NET: Registered protocol family 24
[ 2.817303] VFIO - User Level meta-driver version: 0.3
[ 2.822006] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.826690] ehci-pci: EHCI PCI platform driver
[ 2.831249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.836042] ohci-pci: OHCI PCI platform driver
[ 2.841316] ehci-fsl: Freescale EHCI Host controller driver
[ 2.846064] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[ 2.850881] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[ 2.865689] fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
[ 2.877136] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[ 2.881902] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.886682] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.891498] usb usb1: Product: Freescale On-Chip EHCI Host Controller
[ 2.896373] usb usb1: Manufacturer: Linux 4.8.0-X5000-Tlosm-LB ehci_hcd
[ 2.901254] usb usb1: SerialNumber: fsl-ehci.0
[ 2.906256] hub 1-0:1.0: USB hub found
[ 2.911092] hub 1-0:1.0: 1 port detected
[ 2.915998] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[ 2.920943] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[ 2.935929] fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
[ 2.947135] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[ 2.952152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.957212] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.962260] usb usb2: Product: Freescale On-Chip EHCI Host Controller
[ 2.967294] usb usb2: Manufacturer: Linux 4.8.0-X5000-Tlosm-LB ehci_hcd
[ 2.972307] usb usb2: SerialNumber: fsl-ehci.1
[ 2.977411] hub 2-0:1.0: USB hub found
[ 2.982384] hub 2-0:1.0: 1 port detected
[ 2.987435] usbcore: registered new interface driver usblp
[ 2.992457] usbcore: registered new interface driver usb-storage
[ 2.997414] usbcore: registered new interface driver usbserial
[ 3.002278] usbcore: registered new interface driver usbserial_generic
[ 3.007117] usbserial: USB Serial support registered for generic
[ 3.011946] usbcore: registered new interface driver ftdi_sio
[ 3.016781] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 3.021901] mousedev: PS/2 mouse device common for all mice
[ 3.026984] usbcore: registered new interface driver iforce
[ 3.032098] usbcore: registered new interface driver xpad
[ 3.037447] i2c /dev entries driver
[ 3.042819] mpc-i2c ffe118100.i2c: timeout 1000000 us
[ 3.047894] mpc-i2c ffe119100.i2c: timeout 1000000 us
[ 3.055376] rtc-ds1307 9-006f: rtc core: registered mcp7941x as rtc0
[ 3.060328] rtc-ds1307 9-006f: 64 bytes nvram
[ 3.065514] mpc-i2c ffe118000.i2c: timeout 1000000 us
[ 3.070651] mpc-i2c ffe119000.i2c: timeout 1000000 us
[ 3.075920] md: linear personality registered for level -1
[ 3.080844] md: raid0 personality registered for level 0
[ 3.085747] md: raid1 personality registered for level 1
[ 3.090635] md: raid10 personality registered for level 10
[ 3.095584] md: raid6 personality registered for level 6
[ 3.100417] md: raid5 personality registered for level 5
[ 3.105163] md: raid4 personality registered for level 4
[ 3.109339] ata3: SATA link down (SStatus 0 SControl 310)
[ 3.114696] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 3.119433] Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software
[ 3.124769] mpc85xx_mc_err_probe: No ECC DIMMs discovered
[ 3.129490] mpc85xx_mc_err_probe: No ECC DIMMs discovered
[ 3.135079] EDAC PCI0: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.0.auto (INTERRUPT)
[ 3.139850] genirq: irq 482 uses trigger mode 4; requested 0
[ 3.144614] MPC85xx_edac acquired irq 482 for PCI Err
[ 3.149379] MPC85xx_edac PCI err registered
[ 3.154137] EDAC PCI1: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.1.auto (INTERRUPT)
[ 3.159135] genirq: irq 481 uses trigger mode 4; requested 0
[ 3.164088] MPC85xx_edac acquired irq 481 for PCI Err
[ 3.169021] MPC85xx_edac PCI err registered
[ 3.174205] qoriq_cpufreq: qoriq_cpufreq_cpu_init: no clock information
[ 3.179264] qoriq_cpufreq: qoriq_cpufreq_cpu_init: no clock information
[ 3.184193] qoriq_cpufreq: qoriq_cpufreq_cpu_init: no clock information
[ 3.189040] qoriq_cpufreq: qoriq_cpufreq_cpu_init: no clock information
[ 3.193800] qoriq_cpufreq: Freescale QorIQ CPU frequency scaling driver
[ 3.198868] sdhci: Secure Digital Host Controller Interface driver
[ 3.203664] sdhci: Copyright(c) Pierre Ossman
[ 3.208461] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.231139] usb 1-1: new high-speed USB device number 2 using fsl-ehci
[ 3.240151] mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA
[ 3.245785] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.251235] usbcore: registered new interface driver usbhid
[ 3.256053] usbhid: USB HID core driver
[ 3.261048] Freescale hypervisor management driver
[ 3.265869] fsl-hv: no hypervisor found
[ 3.272218] no UART detected at 0x1
[ 3.277435] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
[ 3.282581] usbcore: registered new interface driver snd-usb-audio
[ 3.287829] usbcore: registered new interface driver snd-ua101
[ 3.293670] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/platform/ffe200000.pcie/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card1/input0
[ 3.298751] usbcore: registered new interface driver snd-usb-usx2y
[ 3.302139] usb 2-1: new high-speed USB device number 2 using fsl-ehci
[ 3.304145] ata2: Signature Update detected @ 503 msecs
[ 3.304152] ata1: Signature Update detected @ 504 msecs
[ 3.319146] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.324439] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.329572] Initializing XFRM netlink socket
[ 3.334958] NET: Registered protocol family 10
[ 3.341590] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.347030] NET: Registered protocol family 17
[ 3.352206] NET: Registered protocol family 15
[ 3.353563] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 3.353566] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.353862] hub 1-1:1.0: USB hub found
[ 3.353936] hub 1-1:1.0: 4 ports detected
[ 3.377758] Key type dns_resolver registered
[ 3.383823] Btrfs loaded, crc32c=crc32c-generic
[ 3.389401] Key type encrypted registered
[ 3.395649] rtc-ds1307 9-006f: setting system clock to 2016-10-19 12:29:32 UTC (1476880172)
[ 3.401110] ALSA device list:
[ 3.406309] #0: Virtual MIDI Card 1
[ 3.411545] #1: HDA ATI HDMI at 0xc10020000 irq 41
[ 3.420547] usb 2-1: New USB device found, idVendor=0424, idProduct=2514
[ 3.425899] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.431460] hub 2-1:1.0: USB hub found
[ 3.436921] hub 2-1:1.0: 4 ports detected
[ 3.464144] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.464147] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.464688] ata1.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
[ 3.464691] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 16/32)
[ 3.464694] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 3.464877] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 3.464882] ata1.00: configured for UDMA/133
[ 3.469758] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
[ 3.497896] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224FB, SB00, max UDMA/100
[ 3.498435] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.498627] ata1.00: Enabling discard_zeroes_data
[ 3.498654] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 3.498820] sd 0:0:0:0: [sda] Write Protect is off
[ 3.498825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.498878] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.499031] ata1.00: Enabling discard_zeroes_data
[ 3.499487] sda: RDSK (512) sda1 (SWP^@)(res 2 spb 1) sda2 ((res 2 spb 1) sda3 (NTFS)(res 2 spb 1)
[ 3.499901] ata1.00: Enabling discard_zeroes_data
[ 3.500154] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.551268] ata2.00: configured for UDMA/100
[ 3.557984] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224FB SB00 PQ: 0 ANSI: 5
[ 3.568980] sr 1:0:0:0: [sr0] scsi3-mmc drive: 16x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.574533] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.580293] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.580383] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.636136] usb 1-1.3: new low-speed USB device number 3 using fsl-ehci
[ 3.732135] usb 2-1.4: new high-speed USB device number 3 using fsl-ehci
[ 3.743927] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c050
[ 3.749512] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.755058] usb 1-1.3: Product: USB-PS/2 Optical Mouse
[ 3.760547] usb 1-1.3: Manufacturer: Logitech
[ 3.770157] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C050.0001/input/input1
[ 3.776164] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-fsl-ehci.0-1.3/input0
[ 3.832289] random: fast init done
[ 3.839171] usb 2-1.4: New USB device found, idVendor=18a5, idProduct=0216
[ 3.845243] usb 2-1.4: New USB device strings: Mfr=10, Product=11, SerialNumber=3
[ 3.851275] usb 2-1.4: Product: Desktop USB Drive
[ 3.857248] usb 2-1.4: Manufacturer: Verbatim
[ 3.863240] usb 1-1.4: new low-speed USB device number 4 using fsl-ehci
[ 3.869159] usb 2-1.4: SerialNumber: 18A5021600008140
[ 3.875584] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[ 3.881476] scsi host6: usb-storage 2-1.4:1.0
[ 3.893964] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.902545] ata4.00: ATA-9: ST1000DX001-1CM162, CC43, max UDMA/133
[ 3.908397] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 3.919158] ata4.00: configured for UDMA/100
[ 3.925209] scsi 3:0:0:0: Direct-Access ATA ST1000DX001-1CM1 CC43 PQ: 0 ANSI: 5
[ 3.945350] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 3.945378] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.945383] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 3.945507] sd 3:0:0:0: [sdb] Write Protect is off
[ 3.945511] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.945559] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.946387] sdb: RDSK (512) sdb1 (NGF^@)(res 2 spb 2) sdb2 (DOS^C)(res 2 spb 2) sdb3 (SWAP)(res 2 spb 8) sdb4 (NGF^@)(res 2 spb 2) sdb5 ((res 2 spb 1) sdb6 ((res 2 spb 1) sdb7 ((res 2 spb 1)
[ 3.947403] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 3.991678] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=0116
[ 3.998145] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.004595] usb 1-1.4: Product: USB Keyboard
[ 4.011018] usb 1-1.4: Manufacturer: CHICONY
[ 4.022673] input: CHICONY USB Keyboard as /devices/platform/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:04F2:0116.0002/input/input2
[ 4.081326] hid-generic 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-fsl-ehci.0-1.4/input0
[ 4.293329] ata5: SATA link down (SStatus 0 SControl 310)
[ 4.621327] ata6: SATA link down (SStatus 0 SControl 310)
[ 4.628076] md: Waiting for all devices to be available before autodetect
[ 4.634873] md: If you don't use raid, use raid=noautodetect
[ 4.641875] md: Autodetecting RAID arrays.
[ 4.648632] md: Scanned 0 and added 0 devices.
[ 4.655349] md: autorun ...
[ 4.662076] md: ... autorun DONE.
[ 4.682961] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[ 4.690011] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[ 4.801365] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.808100] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 4.831814] devtmpfs: mounted
[ 4.838611] Freeing unused kernel memory: 384K (c000000000fdf000 - c00000000103f000)
[ 4.845343] This architecture does not have kernel memory protection.
[ 4.896830] scsi 6:0:0:0: Direct-Access SAMSUNG HD154UI PQ: 0 ANSI: 2 CCS
[ 4.904024] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 4.911186] sd 6:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.918557] sd 6:0:0:0: [sdc] Write Protect is off
[ 4.925216] sd 6:0:0:0: [sdc] Mode Sense: 28 00 00 00
[ 4.925809] sd 6:0:0:0: [sdc] No Caching mode page found
[ 4.932400] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 4.949562] sdc: sdc1
[ 4.958434] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 5.409210] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.416365] systemd[1]: Detected architecture ppc64.
[ 5.446320] systemd[1]: Set hostname to <Amigaone>.
[ 5.714916] systemd[1]: lwresd.service: Cannot add dependency job, ignoring: Unit lwresd.service is masked.
[ 5.721863] systemd[1]: dns-clean.service: Cannot add dependency job, ignoring: Unit dns-clean.service is masked.
[ 5.728885] systemd[1]: cgproxy.service: Cannot add dependency job, ignoring: Unit cgproxy.service is masked.
[ 5.735913] systemd[1]: cgmanager.service: Cannot add dependency job, ignoring: Unit cgmanager.service is masked.
[ 5.744748] systemd[1]: Listening on LVM2 poll daemon socket.
[ 5.758453] systemd[1]: Listening on udev Kernel Socket.
[ 5.771909] systemd[1]: Listening on Journal Socket.
[ 6.494972] mmc0: new high speed SDHC card at address 59b4
[ 6.495243] mmcblk0: mmc0:59b4 USD 3.73 GiB
[ 7.405727] random: crng init done
[ 8.337600] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.444167] systemd-journald[2140]: Received request to flush runtime journal from PID 1
[ 8.936359] r8169 1000:04:04.0 enP4096p4s4: renamed from eth0
[ 9.070632] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.078615] Adding 7807584k swap on /dev/sda1. Priority:-1 extents:1 across:7807584k SSFS
[ 9.389039] cgroup: new mount options do not match the existing superblock, will be ignored
[ 10.590300] IPv6: ADDRCONF(NETDEV_UP): enP4096p4s4: link is not ready
[ 10.599683] r8169 1000:04:04.0 enP4096p4s4: link down
[ 10.599697] r8169 1000:04:04.0 enP4096p4s4: link down
[ 10.599805] IPv6: ADDRCONF(NETDEV_UP): enP4096p4s4: link is not ready
[ 12.125380] r8169 1000:04:04.0 enP4096p4s4: link up
[ 12.125396] IPv6: ADDRCONF(NETDEV_CHANGE): enP4096p4s4: link becomes ready
[ 26.574228] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 26.708611] ISO 9660 Extensions: IEEE_P1282
[ 28.745484] radeon 0000:01:00.0: scheduling IB failed (-2).
[ 28.745496] [drm:.radeon_cs_ioctl] *ERROR* Failed to schedule IB !
[ 140.785080] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 140.785099] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 13 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.785104] ata2.00: status: { DRDY }
[ 140.785112] ata2: hard resetting link
[ 141.285804] ata2: Hardreset failed, not off-lined 0
[ 141.790047] ata2: Signature Update detected @ 503 msecs
[ 141.950056] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 141.952296] ata2.00: configured for UDMA/100
[ 141.952876] ata2: EH complete
[ 651.757727] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 651.757746] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 651.757751] ata2.00: status: { DRDY }
[ 651.757759] ata2: hard resetting link
[ 652.258510] ata2: Hardreset failed, not off-lined 0
[ 652.762696] ata2: Signature Update detected @ 503 msecs
[ 652.922704] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 652.924889] ata2.00: configured for UDMA/100
[ 652.925453] ata2: EH complete
[ 1103.850542] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1103.850561] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 8 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1103.850566] ata2.00: status: { DRDY }
[ 1103.850574] ata2: hard resetting link
[ 1104.350515] ata2: Hardreset failed, not off-lined 0
[ 1104.855507] ata2: Signature Update detected @ 503 msecs
[ 1105.015519] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1105.017593] ata2.00: configured for UDMA/100
[ 1105.018075] ata2: EH complete
[ 1317.865254] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1317.865273] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 3 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1317.865278] ata2.00: status: { DRDY }
[ 1317.865286] ata2: hard resetting link
[ 1318.364531] ata2: Hardreset failed, not off-lined 0
[ 1318.869478] ata2: Signature Update detected @ 503 msecs
[ 1319.029493] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1319.031554] ata2.00: configured for UDMA/100
[ 1319.032037] ata2: EH complete
[ 2249.184079] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2249.184099] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 12 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 2249.184104] ata2.00: status: { DRDY }
[ 2249.184111] ata2: hard resetting link
[ 2249.684444] ata2: Hardreset failed, not off-lined 0
[ 2249.686569] ata2: Signature Update detected @ 0 msecs
[ 2249.845059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2249.848140] ata2.00: configured for UDMA/100
[ 2249.848896] ata2: EH complete
[ 5787.073483] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 5787.073502] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 14 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5787.073507] ata2.00: status: { DRDY }
[ 5787.073515] ata2: hard resetting link
[ 5787.573781] ata2: Hardreset failed, not off-lined 0
[ 5788.078443] ata2: Signature Update detected @ 503 msecs
[ 5788.238447] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5788.241613] ata2.00: configured for UDMA/100
[ 5788.242124] ata2: EH complete
[ 7311.795765] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7311.795784] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 7311.795789] ata2.00: status: { DRDY }
[ 7311.795797] ata2: hard resetting link
[ 7312.296615] ata2: Hardreset failed, not off-lined 0
[ 7312.298742] ata2: Signature Update detected @ 0 msecs
[ 7312.456736] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7312.459836] ata2.00: configured for UDMA/100
[ 7312.460347] ata2: EH complete
[ 8104.876621] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8104.876640] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 15 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8104.876645] ata2.00: status: { DRDY }
[ 8104.876653] ata2: hard resetting link
[ 8105.377438] ata2: Hardreset failed, not off-lined 0
[ 8105.881590] ata2: Signature Update detected @ 503 msecs
[ 8106.041592] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8106.044742] ata2.00: configured for UDMA/100
[ 8106.045253] ata2: EH complete
[ 9299.873870] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9299.873889] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9299.873894] ata2.00: status: { DRDY }
[ 9299.873902] ata2: hard resetting link
[ 9300.374677] ata2: Hardreset failed, not off-lined 0
[ 9300.878834] ata2: Signature Update detected @ 503 msecs
[ 9301.038833] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9301.042309] ata2.00: configured for UDMA/100
[ 9301.042838] ata2: EH complete
[ 9749.917813] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9749.917833] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 7 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9749.917838] ata2.00: status: { DRDY }
[ 9749.917845] ata2: hard resetting link
[ 9750.418786] ata2: Hardreset failed, not off-lined 0
[ 9750.922778] ata2: Signature Update detected @ 502 msecs
[ 9751.082788] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9751.085962] ata2.00: configured for UDMA/100
[ 9751.086473] ata2: EH complete
[ 9975.707786] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9975.707806] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 8 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9975.707811] ata2.00: status: { DRDY }
[ 9975.707819] ata2: hard resetting link
[ 9976.207743] ata2: Hardreset failed, not off-lined 0
[ 9976.712753] ata2: Signature Update detected @ 503 msecs
[ 9976.872755] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9976.875870] ata2.00: configured for UDMA/100
[ 9976.876380] ata2: EH complete
[10093.978722] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10093.978740] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 4 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[10093.978746] ata2.00: status: { DRDY }
[10093.978753] ata2: hard resetting link
[10094.479170] ata2: Hardreset failed, not off-lined 0
[10094.983693] ata2: Signature Update detected @ 503 msecs
[10095.143688] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10095.146768] ata2.00: configured for UDMA/100
[10095.147279] ata2: EH complete
[11047.826134] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[11047.826154] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 8 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[11047.826159] ata2.00: status: { DRDY }
[11047.826167] ata2: hard resetting link
[11048.326224] ata2: Hardreset failed, not off-lined 0
[11048.831117] ata2: Signature Update detected @ 503 msecs
[11048.991100] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[11048.994241] ata2.00: configured for UDMA/100
[11048.994764] ata2: EH complete
[12238.727445] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[12238.727464] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[12238.727469] ata2.00: status: { DRDY }
[12238.727477] ata2: hard resetting link
[12239.228096] ata2: Hardreset failed, not off-lined 0
[12239.732412] ata2: Signature Update detected @ 503 msecs
[12239.892408] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[12239.895483] ata2.00: configured for UDMA/100
[12239.895994] ata2: EH complete
[13491.069128] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[13491.069146] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 6 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[13491.069151] ata2.00: status: { DRDY }
[13491.069159] ata2: hard resetting link
[13491.569938] ata2: Hardreset failed, not off-lined 0
[13491.572066] ata2: Signature Update detected @ 0 msecs
[13491.730111] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[13491.733248] ata2.00: configured for UDMA/100
[13491.733754] ata2: EH complete
[13556.604604] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[13556.604623] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[13556.604628] ata2.00: status: { DRDY }
[13556.604636] ata2: hard resetting link
[13557.104939] ata2: Hardreset failed, not off-lined 0
[13557.107066] ata2: Signature Update detected @ 0 msecs
[13557.265578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[13557.268663] ata2.00: configured for UDMA/100
[13557.269172] ata2: EH complete
[14142.839920] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[14142.839940] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 10 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[14142.839945] ata2.00: status: { DRDY }
[14142.839952] ata2: hard resetting link
[14143.340796] ata2: Hardreset failed, not off-lined 0
[14143.844895] ata2: Signature Update detected @ 502 msecs
[14144.004899] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[14144.008284] ata2.00: configured for UDMA/100
[14144.008801] ata2: EH complete
[14250.871052] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[14250.871071] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 1 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[14250.871076] ata2.00: status: { DRDY }
[14250.871085] ata2: hard resetting link
[14251.371418] ata2: Hardreset failed, not off-lined 0
[14251.877023] ata2: Signature Update detected @ 504 msecs
[14252.036031] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[14252.039512] ata2.00: configured for UDMA/100
[14252.040050] ata2: EH complete
[14707.059412] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[14707.059431] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 2 pio 16392 in
opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[14707.059436] ata2.00: status: { DRDY }
[14707.059443] ata2: hard resetting link
[14707.559493] ata2: Hardreset failed, not off-lined 0
[14708.064388] ata2: Signature Update detected @ 503 msecs
[14708.224391] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[14708.227492] ata2.00: configured for UDMA/100
[14708.227998] ata2: EH complete
lshw:
description: Computer
product: varisys,CYRUS5040
width: 32 bits
capabilities: smp
*-core
description: Motherboard
physical id: 0
*-cpu:0
description: CPU
product: e5500
physical id: 0
bus info: cpu@0
version: 1.2 (pvr 8024 0012)
size: 2200MHz
clock: 800MHz
*-cache
description: L1 Cache
physical id: 0
size: 32KiB
*-cpu:1
description: CPU
product: e5500
physical id: 1
bus info: cpu@1
version: 1.2 (pvr 8024 0012)
size: 2200MHz
clock: 800MHz
*-cache
description: L1 Cache
physical id: 0
size: 32KiB
*-cpu:2
description: CPU
product: e5500
physical id: 2
bus info: cpu@2
version: 1.2 (pvr 8024 0012)
size: 2200MHz
clock: 800MHz
*-cache
description: L1 Cache
physical id: 0
size: 32KiB
*-cpu:3
description: CPU
product: e5500
physical id: 3
bus info: cpu@3
version: 1.2 (pvr 8024 0012)
size: 2200MHz
clock: 800MHz
*-cache
description: L1 Cache
physical id: 0
size: 32KiB
*-memory
description: System memory
physical id: 4
size: 3426MiB
*-processor:0
description: Power PC
product: Freescale Semiconductor Inc
vendor: Freescale Semiconductor Inc
physical id: 5
bus info: pci@0000:00:00.0
version: 21
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress bus_master cap_list
configuration: driver=pcieport latency=0
resources: irq:482 ioport:0(size=65536) memory:c00000000-c1fffffff
*-display
description: VGA compatible controller
product: Whistler LE [Radeon HD 6610M/7610M]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 6
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:27 memory:c00000000-c0fffffff memory:c10000000-c1001ffff ioport:1000(size=256) memory:c10040000-c1005ffff
*-multimedia
description: Audio device
product: Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:41 memory:c10020000-c10023fff
*-processor:1
description: Power PC
product: Freescale Semiconductor Inc
vendor: Freescale Semiconductor Inc
physical id: 7
bus info: pci@1000:00:00.0
version: 21
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress bus_master cap_list
configuration: driver=pcieport latency=0
resources: irq:481 ioport:0(size=65536) memory:c20000000-c3fffffff
*-pci
description: PCI bridge
product: Integrated Device Technology, Inc. [IDT]
vendor: Integrated Device Technology, Inc. [IDT]
physical id: 100
bus info: pci@1000:01:00.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:0 ioport:1000(size=4096) memory:c20000000-c200fffff
*-pci:0
description: PCI bridge
product: Integrated Device Technology, Inc. [IDT]
vendor: Integrated Device Technology, Inc. [IDT]
physical id: 1
bus info: pci@1000:02:01.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm msi normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:20 ioport:1000(size=4096) memory:c20000000-c200fffff
*-pci
description: PCI bridge
product: PI7C9X111SL PCIe-to-PCI Reversible Bridge
vendor: Pericom Semiconductor
physical id: 0
bus info: pci@1000:03:00.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pcix pm pciexpress msi normal_decode bus_master cap_list
resources: ioport:1000(size=4096) memory:c20000000-c200fffff
*-network
description: Ethernet interface
product: RTL8169 PCI Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 4
bus info: pci@1000:04:04.0
logical name: enP4096p4s4
version: 10
serial: 60:e3:27:05:53:20
size: 100Mbit/s
capacity: 1Gbit/s
width: 32 bits
clock: 66MHz
capabilities: bus_master rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.11 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100Mbit/s
resources: irq:18 ioport:1000(size=256) memory:c20000000-c200000ff memory:c20020000-c2003ffff
*-storage
description: RAID bus controller
product: SiI 3114 [SATALink/SATARaid] Serial ATA Controller
vendor: Silicon Image, Inc.
physical id: 5
bus info: pci@1000:04:05.0
version: 02
width: 32 bits
clock: 66MHz
capabilities: storage pm bus_master cap_list rom
configuration: driver=sata_sil latency=128
resources: irq:19 ioport:1100(size=8) ioport:1108(size=4) ioport:1110(size=8) ioport:1118(size=4) ioport:1120(size=16) memory:c20000400-c200007ff memory:c20080000-c200fffff
*-pci:1
description: PCI bridge
product: Integrated Device Technology, Inc. [IDT]
vendor: Integrated Device Technology, Inc. [IDT]
physical id: 2
bus info: pci@1000:02:02.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm msi normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:21
*-pci:2
description: PCI bridge
product: Integrated Device Technology, Inc. [IDT]
vendor: Integrated Device Technology, Inc. [IDT]
physical id: 3
bus info: pci@1000:02:03.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm msi normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:22
*-pci:3
description: PCI bridge
product: Integrated Device Technology, Inc. [IDT]
vendor: Integrated Device Technology, Inc. [IDT]
physical id: 8
bus info: pci@1000:02:08.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm msi normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:23
*-pci:4
description: PCI bridge
product: Integrated Device Technology, Inc. [IDT]
vendor: Integrated Device Technology, Inc. [IDT]
physical id: 10
bus info: pci@1000:02:10.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm msi normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:26
*-scsi:0
physical id: 8
logical name: scsi0
capabilities: emulated
*-disk
description: ATA Disk
product: Samsung SSD 840
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 6B0Q
serial: S14CNEBCB16572V
size: 111GiB (120GB)
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-scsi:1
physical id: 9
logical name: scsi1
capabilities: emulated
*-cdrom
description: DVD-RAM writer
product: CDDVDW SH-224FB
vendor: TSSTcorp
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/sr0
logical name: /media/amigaone/BOOT
version: SB00
serial: [
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,nosuid,nodev,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted status=ready
*-medium
physical id: 0
logical name: /dev/cdrom
logical name: /media/amigaone/BOOT
configuration: mount.fstype=iso9660 mount.options=ro,nosuid,nodev,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted
*-scsi:2
physical id: a
logical name: scsi3
capabilities: emulated
*-disk
description: ATA Disk
product: ST1000DX001-1CM1
vendor: Seagate
physical id: 0.0.0
bus info: scsi@3:0.0.0
logical name: /dev/sdb
version: CC43
serial: Z1D9K8LY
size: 931GiB (1TB)
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096
*-scsi:3
physical id: b
bus info: usb@2:1.4
logical name: scsi6
capabilities: emulated scsi-host
configuration: driver=usb-storage
*-disk
description: SCSI Disk
product: HD154UI
vendor: SAMSUNG
physical id: 0.0.0
bus info: scsi@6:0.0.0
logical name: /dev/sdc
serial: 801130168383
size: 1397GiB (1500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=2 logicalsectorsize=512 sectorsize=512 signature=0cd096ae
*-volume
description: Windows FAT volume
vendor: MSWIN4.1
physical id: 1
bus info: scsi@6:0.0.0,1
logical name: /dev/sdc1
logical name: /media/amigaone/VERBATIM
version: FAT32
serial: 0000-0000
size: 1397GiB
capacity: 1397GiB
capabilities: primary fat initialized
configuration: FATs=2 filesystem=fat label=VERBATIM mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: dummy0
serial: b2:ee:2c:7d:19:ae
capabilities: ethernet physical
configuration: broadcast=yes driver=dummy driverversion=1.0
Hello Scott On 23/10/2016, Andy Fleming wrote: > These config changes build: > drivers/power/reset/gpio-poweroff.c > drivers/power/reset/gpio-restart.c > > Signed-off-by: Andy Fleming <afleming@gmail.com> > --- > arch/powerpc/configs/fsl-emb-nonhw.config | 6 ++++++ > 1 file changed, 6 insertions(+) Is there any news on when these patches will be merged? We have end-users with Cyrus boards now, and would like to provide them with a mainline kernel that can power-off/reset the board. Thanks Darren
diff --git a/arch/powerpc/configs/fsl-emb-nonhw.config b/arch/powerpc/configs/fsl-emb-nonhw.config index 1a61e81..cc49c95 100644 --- a/arch/powerpc/configs/fsl-emb-nonhw.config +++ b/arch/powerpc/configs/fsl-emb-nonhw.config @@ -44,6 +44,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAME_WARN=1024 CONFIG_FTL=y +CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_HIGH_RES_TIMERS=y @@ -104,8 +105,13 @@ CONFIG_PACKET=y CONFIG_PARTITION_ADVANCED=y CONFIG_PERF_EVENTS=y CONFIG_POSIX_MQUEUE=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y CONFIG_QNX4FS_FS=m CONFIG_RCU_TRACE=y +CONFIG_RESET_CONTROLLER=y CONFIG_ROOT_NFS=y CONFIG_SYSV_FS=m CONFIG_SYSVIPC=y
These config changes build: drivers/power/reset/gpio-poweroff.c drivers/power/reset/gpio-restart.c Signed-off-by: Andy Fleming <afleming@gmail.com> --- arch/powerpc/configs/fsl-emb-nonhw.config | 6 ++++++ 1 file changed, 6 insertions(+)